bring back the avr32, blackfin, sh, sparc architectures into working order,
by reverting the effects of this change that came in via the x86 tree:

   commit a5a19c63
   Author: Jeremy Fitzhardinge <jeremy@goop.org>
   Date:   Wed Jan 30 13:33:39 2008 +0100

       x86: demacro asm-x86/pgalloc_32.h

Sorry about that!
Signed-off-by: NIngo Molnar <mingo@elte.hu>

ia64 has a special processor specific mapping that can be used to locate the
offset for the current per cpu area.

Cc: linux-ia64@vger.kernel.org
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Migrating the apic timer in the critical section is not very nice, and is
absolutely horrible with the real-time port.  Move migration to the regular
vcpu execution path, triggered by a new bitflag.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

kvm_para.h potentially contains definitions that are to be used by userspace,
so it should not be included inside the __KERNEL__ block. To protect its own
data structures, kvm_para.h already includes its own __KERNEL__ block.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Acked-by: NAmit Shah <amit.shah@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves kvm_fpu asm-x86/kvm.h to allow every architecture to
define an own representation used for KVM_GET_FPU/KVM_SET_FPU.
Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Acked-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Convert the synchronization of the shadow handling to a separate mmu_lock
spinlock.

Also guard fetch() by mmap_sem in read-mode to protect against alias
and memslot changes.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

In preparation for a mmu spinlock, add kvm_read_guest_atomic()
and use it in fetch() and prefetch_page().
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This adds a mechanism for exposing the virtual apic tpr to the guest, and a
protocol for letting the guest update the tpr without causing a vmexit if
conditions allow (e.g. there is no interrupt pending with a higher priority
than the new tpr).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add a facility to report on accesses to the local apic tpr even if the
local apic is emulated in the kernel.  This is basically a hack that
allows userspace to patch Windows which tends to bang on the tpr a lot.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

IA64 also needs to see ioapic structure in irqchip.
Signed-off-by: Nxiantao.zhang@intel.com <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Moving kvm_vcpu_kick() to x86.c. Since it should be
common for all archs, put its declarations in <linux/kvm_host.h>
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This paves the way for multiple architecture support.  Note that while
ioapic.c could potentially be shared with ia64, it is also moved.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h>
includes, not existing.  Rather than add a zillion <asm/kvm.h>s, export kvm.h
only if the arch actually supports it.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch fixes a small issue where sturctures:
	kvm_pic_state
	kvm_ioapic_state

are defined inside x86 specific code and may or may not
be defined in anyway for other architectures. The problem
caused is one cannot compile userspace apps (ex. libkvm)
for other archs since a size cannot be determined for these
structures.
Signed-off-by: NJerone Young <jyoung5@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The current cpuid management suffers from several problems, which inhibit
passing through the host feature set to the guest:

 - No way to tell which features the host supports

  While some features can be supported with no changes to kvm, others
  need explicit support.  That means kvm needs to vet the feature set
  before it is passed to the guest.

 - No support for indexed or stateful cpuid entries

  Some cpuid entries depend on ecx as well as on eax, or on internal
  state in the processor (running cpuid multiple times with the same
  input returns different output).  The current cpuid machinery only
  supports keying on eax.

 - No support for save/restore/migrate

  The internal state above needs to be exposed to userspace so it can
  be saved or migrated.

This patch adds extended cpuid support by means of three new ioctls:

 - KVM_GET_SUPPORTED_CPUID: get all cpuid entries the host (and kvm)
   supports

 - KVM_SET_CPUID2: sets the vcpu's cpuid table

 - KVM_GET_CPUID2: gets the vcpu's cpuid table, including hidden state

[avi: fix original KVM_SET_CPUID not removing nx on non-nx hosts as it did
      before]
Signed-off-by: NDan Kenigsberg <danken@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves structures:
	kvm_cpuid_entry
	kvm_cpuid

from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: NJerone Young <jyoung5@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move structures:
	kvm_sregs
	kvm_msr_entry
	kvm_msrs
	kvm_msr_list

from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves structures:
	kvm_segment
	kvm_dtable
from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: NJerone Young <jyoung5@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves structure lapic_state from include/linux/kvm.h
to include/asm-x86/kvm.h
Signed-off-by: NJerone Young <jyoung5@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves structure kvm_regs to include/asm-x86/kvm.h.
Each architecture will need to create there own version of this
structure.
Signed-off-by: NJerone Young <jyoung5@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves structures:
	kvm_pic_state
	kvm_ioapic_state

to inclue/asm-x86/kvm.h.
Signed-off-by: NJerone Young <jyoung5@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves sturct kvm_memory_alias from include/linux/kvm.h
to include/asm-x86/kvm.h. Also have include/linux/kvm.h include
include/asm/kvm.h.
Signed-off-by: NJerone Young <jyoung5@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently kvm has a wart in that it requires three extra pages for use
as a tss when emulating real mode on Intel.  This patch moves the allocation
internally, only requiring userspace to tell us where in the physical address
space we can place the tss.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently kvm provides hypercalls only for x86* architectures. To
provide hypercall infrastructure for other kvm architectures I split
kvm_para.h into a generic header file and architecture specific
definitions.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of having the kernel allocate memory to the guest, let userspace
allocate it and pass the address to the kernel.

This is required for s390 support, but also enables features like memory
sharing and using hugetlbfs backed memory.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The user is now able to set how many mmu pages will be allocated to the guest.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch refactors the current hypercall infrastructure to better
support live migration and SMP.  It eliminates the hypercall page by
trapping the UD exception that would occur if you used the wrong hypercall
instruction for the underlying architecture and replacing it with the right
one lazily.

A fall-out of this patch is that the unhandled hypercalls no longer trap to
userspace.  There is very little reason though to use a hypercall to
communicate with userspace as PIO or MMIO can be used.  There is no code
in tree that uses userspace hypercalls.

[avi: fix #ud injection on vmx]
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch adds a new configuration option, which adds support for a new
early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch()
to decide wether OHCI-1394 FireWire controllers should be initialized and
enabled for physical DMA access to allow remote debugging of early problems
like issues ACPI or other subsystems which are executed very early.

If the config option is not enabled, no code is changed, and if the boot
paramenter is not given, no new code is executed, and independent of that,
all new code is freed after boot, so the config option can be even enabled
in standard, non-debug kernels.

With specialized tools, it is then possible to get debugging information
from machines which have no serial ports (notebooks) such as the printk
buffer contents, or any data which can be referenced from global pointers,
if it is stored below the 4GB limit and even memory dumps of of the physical
RAM region below the 4GB limit can be taken without any cooperation from the
CPU of the host, so the machine can be crashed early, it does not matter.

In the extreme, even kernel debuggers can be accessed in this way. I wrote
a small kgdb module and an accompanying gdb stub for FireWire which allows
to gdb to talk to kgdb using remote remory reads and writes over FireWire.

An version of the gdb stub fore FireWire is able to read all global data
from a system which is running a a normal kernel without any kernel debugger,
without any interruption or support of the system's CPU. That way, e.g. the
task struct and so on can be read and even manipulated when the physical DMA
access is granted.

A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt
and I've put a copy online at
ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt

It also has links to all the tools which are available to make use of it
another copy of it is online at:
ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diffSigned-Off-By: NBernhard Kaindl <bk@suse.de>
Tested-By: NThomas Renninger <trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

get more testing of the c_p_a() code done by not turning off
PSE on DEBUG_PAGEALLOC.

this simplifies the early pagetable setup code, and tests
the largepage-splitup code quite heavily.

In the end, all the largepages will be split up pretty quickly,
so there's no difference to how DEBUG_PAGEALLOC worked before.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Convert macros into inline functions, for better type-checking.

This patch required a little bit of fiddling with headers in order to
make __(pte|pmd)_free_tlb inline rather than macros.
asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly
use any pgalloc definitions.  I removed this include to avoid an
include cycle, but it may cause secondary compile failures by things
depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one
such place; there may be others.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch defines the PCI identifiers found in
the RDC R-321x System-on-Chip.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

They now look like:

hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]

This makes it easier to pinpoint bugs to specific libraries.

And printing the offset into a mapping also always allows to find the
correct fault point in a library even with randomized mappings. Previously
there was no way to actually find the correct code address inside
the randomized mapping.

Relies on earlier patch to shorten the printk formats.

They are often now longer than 80 characters, but I think that's worth it.

[includes fix from Eric Dumazet to check d_path error value]
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

On VMs implemented using JITs that cache translated code changing the lock
prefixes is a quite costly operation that forces the JIT to throw away and
retranslate a lot of code.

Previously a SMP kernel would rewrite the locks once for each CPU which
is quite unnecessary. This patch changes the code to never switch at boot in
 the normal case (SMP kernel booting with >1 CPU) or only once for SMP kernel
on UP.

This makes a significant difference in boot up performance on AMD SimNow!
Also I expect it to be a little faster on native systems too because a smp
switch does a lot of text_poke()s which each synchronize the pipeline.

v1->v2: Rename max_cpus
v1->v2: Fix off by one in UP check (Thomas Gleixner)
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The ENDPROCs() were not used everywhere.  Some code used just END() instead,
while other code used nothing.  um/sys-i386/checksum.S didn't #include
<linux/linkage.h> .  I also got confused because gcc puts the
.type near the ENTRY, while ENDPROC puts it on the opposite end.

Signed off by: John Reiser <jreiser@BitWagon.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well.

saves ~2K:

   text    data     bss     dec     hex filename
   7290283 3672091 1907848 12870222         c4624e vmlinux.before
   7288373 3671795 1907848 12868016         c459b0 vmlinux.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

introduce the "asmregparm" calling convention: for functions
implemented in assembly with a fixed regparm input parameters
calling convention.

mark the semaphore and rwsem slowpath functions with that.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Here is a quick and naive smoke test for kprobes. This is intended to
just verify if some unrelated change broke the *probes subsystem. It is
self contained, architecture agnostic and isn't of any great use by itself.

This needs to be built in the kernel and runs a basic set of tests to
verify if kprobes, jprobes and kretprobes run fine on the kernel. In case
of an error, it'll print out a message with a "BUG" prefix.

This is a start; we intend to add more tests to this bucket over time.

Thanks to Jim Keniston and Masami Hiramatsu for comments and suggestions.

Tested on x86 (32/64) and powerpc.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- Special consideration for IA64: Add the ability to specify
  arch specific per cpu flags

- remove .data.percpu attribute from DEFINE_PER_CPU for non-smp case.

The arch definitions are all the same. So move them into linux/percpu.h.

We cannot move DECLARE_PER_CPU since some include files just include
asm/percpu.h to avoid include recursion problems.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199317452 28800
# Node ID f7e7db3facd9406545103164f9be8f9ba1a2b549
# Parent  4d9a413a0f4c1d98dbea704f0366457b5117045d
x86: add _AT() macro to conditionally cast

Define _AT(type, value) to conditionally cast a value when compiling C
code, but not when used in assembler.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This makes ELF core dumps of 32-bit processes include a new
note type NT_386_TLS (0x200) giving the contents of the TLS
slots in struct user_desc format.  This lets post mortem
examination figure out what the segment registers mean like
the debugger does with get_thread_area on a live process.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>