drm/panel: Changes for v4.3-rc1

This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.

* tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/bridge: Put Kconfig entries in a separate menu
  drm/panel: Add support for LG LG4573 480x800 4.3" panel
  drm/panel: Add display timing for Okaya RS800480T-7X0GP
  of: Add Okaya Electric America vendor prefix
  drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel
  drm/panel: simple: Add support for AUO B080UAN01
  drm/panel: simple: Correct minimum hsync length of the HannStar HSD070PWW1 panel
  drm/panel: simple: Add bus format for HannStar HSD070PWW1 LVDS panel
  drm/bridge: Add vendor prefixes
  drm/panel: Add Samsung prefix to panel drivers
  drm/exynos: Remove PTN3460 dependency

drm/tegra: Changes for v4.3-rc1

There are a bunch of non-critical fixes here that I've collected over
the past few months, but the biggest part is Tegra210 support, in the
DC, DSI and SOR/HDMI drivers.

Also this finally restores DPMS with atomic mode-setting, something
that has been broken since the conversion and which I had originally
expected to take far less longer to fix.

* tag 'drm/tegra/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux: (41 commits)
  drm/tegra: sor: Add HDMI support
  drm/tegra: sor: Add Tegra210 eDP support
  drm/tegra: dc: Implement atomic DPMS
  drm/tegra: sor: Restore DPMS
  drm/tegra: dsi: Restore DPMS
  drm/tegra: hdmi: Restore DPMS
  drm/tegra: rgb: Restore DPMS
  drm/tegra: sor: Use DRM debugfs infrastructure for CRC
  drm/tegra: sor: Write correct head state registers
  drm/tegra: sor: Constify display mode
  drm/tegra: sor: Reset the correct debugfs fields
  drm/tegra: sor: Set minor after debugfs initialization
  drm/tegra: sor: Provide error messages in probe
  drm/tegra: sor: Rename registers for consistency
  drm/tegra: dpaux: Disable interrupt when detached
  drm/tegra: dpaux: Configure pads as I2C by default
  drm/tegra: dpaux: Provide error message in probe
  drm/tegra: dsi: Add Tegra210 support
  drm/tegra: dsi: Add Tegra132 support
  drm/tegra: dsi: Add Tegra124 support
  ...

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
- Clean up HDMI and MIXER parts
- Clean up legacy structures specific to Exynos DRM
  . This patch series removes existing exyons_drm_display and
    exynos_drm_encoder structures specific to Exynos DRM, and
    makes them to replace with common drm_encoder structure.
    With cleanup patch, we removes exynos_drm_encoder module.
- Clean up gem, dmabuf and buffer modules
  . This patch series replaces existing Exynos DRM dmabuf codes
    with common drm prime ones, and embeds all codes of exynos_drm_buf
    into exynos_drm_gem module.
    With cleanup patch, we removes exynos_drm_buf and exynos_drm_dmabuf
    modules.
- And some fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (53 commits)
  drm/exynos: merge exynos_drm_buf.c to exynos_drm_gem.c
  drm/exynos: use prime helpers
  drm/exynos: remove function roundup_gem_size
  drm/exynos: remove function update_vm_cache_attr
  drm/exynos: remove function check_gem_flags
  drm/exynos: use ERR_PTR instead of NULL in exynos_drm_gem_init
  drm/exynos: remove unused fields of struct exynos_drm_gem_buf
  drm/exynos: stop copying sg table
  drm/exynos: remove function exynos_drm_gem_map_buf
  drm/exynos: remove mutex locking in pagefault handler
  drm/exynos: remove function convert_to_vm_err_msg
  drm/exynos: stop using sgtable in page fault handler
  drm/exynos: remove struct exynos_drm_encoder layer
  drm/exynos: fold encoder setup into exynos_drm_load()
  drm/exynos: remove exynos_drm_create_enc_conn()
  drm/exynos: remove exynos_encoder's .commit() op
  drm/exynos: remove extra call to exynos_dp_commit()
  drm/exynos: remove extra call to hdmi_commit()
  drm/exynos: remove struct exynos_drm_display
  drm/exynos: simplify calculation of possible CRTCs
  ...

1) includes all the drm/msm side of things for upstream kernel working
on dragonboard 410c (still some pending work on adv7533 bridge chip)
2) initial support for msm8x94 (snapdragon 810)
3) support for msm8x74v1 (in addition to existing v2 support)
4) support for dma planes on mdp5 (additional planes that cannot scale/csc)
5) more yuv format support for mdp5 (single plane vyuy/uyvy/yuyv/yvyu,
two plane nv16/nv61, and three plane yuv420/yvu420)
6) rotation support for mdp5
7) initial hdcp support
8) fixes, etc

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (46 commits)
  drm/msm/dsi: Introduce DSI configuration module
  drm/msm/dsi: Make each PHY type compilation independent
  drm/msm/dsi: Split PHY drivers to separate files
  drm/msm/dsi: Return void from msm_dsi_phy_disable()
  drm/msm/dsi: Specify bitmask to set source PLL
  drm/msm/mdp: Clear pending interrupt status before enable interrupt
  drm/msm/mdp5: Add rotation (hflip/vflip) support to MDP5 planes (v2)
  drm/msm: add calls to prepare and unprepare panel
  drm/msm/dsi: Modify dsi manager bridge ops to work with external bridges
  drm/msm/dsi: Allow dsi to connect to an external bridge
  drm/msm/dsi: Create a helper to check if there is a connected device
  drm/msm/dsi: Refer to connected device as 'device' instead of 'panel'
  drm/msm/dsi: Make TE gpio optional
  drm/msm: mdp4 lvds: get panel node via of graph parsing
  drm/msm: dsi host: Use device graph parsing to parse connected panel
  drm/msm: dsi host: add missing of_node_put()
  drm/msm: Enable clocks during enable/disable_vblank() callbacks
  drm/msm/mdp5: Add support for msm8x74v1
  drm/msm/mdp5: Add DMA pipe planes for MDP5
  drm/msm/mdp: Add capabilities to MDP planes (v2)
  ...

Merge tag 'drm-intel-next-fixes-2015-08-16' of git://anongit.freedesktop.org/drm-intel into drm-next

Bunch more fixes for 4.3, most of it skl fallout. It's not quite all yet,
there's still a few more patches pending to enable DDI-E correctly on skl.
Also included the dpms atomic work from Maarten since atomic is just a
pain and not including would cause piles of conflicts right from the
start.

* tag 'drm-intel-next-fixes-2015-08-16' of git://anongit.freedesktop.org/drm-intel: (67 commits)
  drm/i915: Per-DDI I_boost override
  drm/i915/skl: WaIgnoreDDIAStrap is forever, always init DDI A
  drm/i915: fix checksum write for automated test reply
  drm/i915: Contain the WA_REG macro
  drm/i915: Remove the failed context from the fpriv->context_idr
  drm/i915: Report IOMMU enabled status for GPU hangs
  drm/i915: Check idle to active before processing CSQ
  drm/i915: Set alternate aux for DDI-E
  drm/i915: Set power domain for DDI-E
  drm/i915: fix stolen bios_reserved checks
  drm/i915: Use masked write for Context Status Buffer Pointer
  drm/i915/skl WaDisableSbeCacheDispatchPortSharing
  drm/i915: Spam less on dp aux send/receive problems
  drm/i915: Handle return value in intel_pin_and_fence_fb_obj, v2.
  drm/i915: Only update mode related state if a modeset happened.
  drm/i915: Remove connectors_active.
  drm/i915: Remove connectors_active from intel_dp.c, v2.
  drm/i915: Remove connectors_active from sanitization, v2.
  drm/i915: Get rid of dpms handling.
  drm/i915: Make crtc checking use the atomic state, v2.
  ...

Linux 4.2-rc7

Backmerge master for i915 fixes

Pull ARM SoC fixes from Olof Johansson:
 "A smallish batch of fixes, a little more than expected this late, but
  all fixes are contained to their platforms and seem reasonably low
  risk:

   - a somewhat large SMP fix for ux500 that still seemed warranted to
     include here
   - OMAP DT fixes for pbias regulator specification that broke due to
     some DT reshuffling
   - PCIe IRQ routing bugfix for i.MX
   - networking fixes for keystone
   - runtime PM for OMAP GPMC
   - a couple of error path bug fixes for exynos"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file
  ARM: dts: keystone: fix the clock node for mdio
  memory: omap-gpmc: Don't try to save uninitialized GPMC context
  ARM: imx6: correct i.MX6 PCIe interrupt routing
  ARM: ux500: add an SMP enablement type and move cpu nodes
  ARM: dts: dra7: Fix broken pbias device creation
  ARM: dts: OMAP5: Fix broken pbias device creation
  ARM: dts: OMAP4: Fix broken pbias device creation
  ARM: dts: omap243x: Fix broken pbias device creation
  ARM: EXYNOS: fix double of_node_put() on error path
  ARM: EXYNOS: Fix potentian kfree() of ro memory

Pull MIPS bugfix from Ralf Baechle:
 "Only a single MIPS fix - the math when invoking syscall_trace_enter
  was wrong"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix seccomp syscall argument for MIPS64

Merge x86 fixes from Ingo Molnar:
 "Two followup fixes related to the previous LDT fix"

Also applied a further FPU emulation fix from Andy Lutomirski to the
branch before actually merging it.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
  x86/ldt: Further fix FPU emulation
  x86/ldt: Correct FPU emulation access to LDT
  x86/ldt: Correct LDT access in single stepping logic

The previous fix confused a selector with a segment prefix.  Fix it.

Compile-tested only.

Cc: stable@vger.kernel.org
Cc: Juergen Gross <jgross@suse.com>
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Fixes: 4809146b ("x86/ldt: Correct FPU emulation access to LDT")
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fuse_dev_ioctl() performed fuse_get_dev() on a user-supplied fd,
leading to a type confusion issue. Fix it by checking file->f_op.
Signed-off-by: NJann Horn <jann@thejh.net>
Acked-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'keystone-dts-late-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes

ARM: Couple of Keysyone MDIO DTS fixes for 4.2-rc6+

These are necessary to get the NIC card working on all Keystone
EVMs. Couple of boards are broken without these two fixes.

* tag 'keystone-dts-late-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file
  ARM: dts: keystone: fix the clock node for mdio
Signed-off-by: NOlof Johansson <olof@lixom.net>

Commit 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)")
fixed indirect system calls on O32 but it also introduced a bug for MIPS64
where it erroneously modified the v0 (syscall) register with the assumption
that the sycall offset hasn't been taken into consideration. This breaks
seccomp on MIPS64 n64 and n32 ABIs. We fix this by replacing the addition
with a move instruction.

Fixes: 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)")
Cc: <stable@vger.kernel.org> # 3.15+
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10951/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The struct exynos_drm_gem_obj can have fields of the struct
exynos_drm_gem_buf then don't need to use exynos_drm_buf.c file.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The dma-buf codes of exynos drm is almost same with prime helpers. A
difference is that consider DMA_NONE when import dma-buf, but it's wrong
and we don't consider it any more, so we can use prime interface.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The function roundup_gem_size can be merged in exynos_drm_gem_create.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The function update_vm_cache_attr can be merged in exynos_drm_gem_mmap.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The function check_gem_flags is too simple, so it's better to move codes
in each consumer functions.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

For more correct error information.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The userptr, write and pfnmap of struct exynos_drm_gem_buf are not used
anywhere.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Already struct exynos_drm_gem_buf has pages of the buffer, so we don't
need to copy from sg table of the buffer to sg table of dma-buf
attachment, just can make sg table from pages of the buffer.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The exynos_drm_gem_map_buf can be merged in exynos_drm_gem_fault.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

There is no reason to use mutex locking in pagefault handler.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The convert_to_vm_err_msg is called just once by exynos_drm_gem_fault,
so it's simple not to use the function.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Already struct exynos_drm_gem_buf has pages of the buffer when buffer is
created, so just can use pages in page fault handler, we don't have to
make sgtable of the buffer. But this needs to construct pages of the
buffer that is imported from dma-buf prime.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

struct exynos_drm_encoder was justing wrapping struct drm_encoder, it had
only a drm_encoder member and the internal exynos_drm_encoders ops that
was directly mapped to the drm_encoder helper funcs.

So now exynos DRM uses struct drm_encoder directly, this removes
completely the struct exynos_drm_encoder.

v2: add empty .mode_fixup() and .mode_set() to DSI and DPI to avoid null
pointer.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

As we are removing the exynos encoder move the encoder setup operation
directly inside the exynos_drm_load()
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This functions was just hiding the encoder and connector creation in
a way that was less clean than if we get rid of it. For example,
exynos_encoder ops had .create_connector() defined only because we were
handing off the encoder and connector creation to
exynos_drm_create_enc_conn(). Without this function we can directly call
the create_connector function internally in the code, without the need of
any vtable access.

It also does some refactoring in the code like creating a bind function
for dpi devices.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

.commit() is not used anymore, Exynos encoders now follow the
.enable()/.disable() semantics from drm atomic core, so remove this
callback.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

exynos_dp_commit() was getting called twice by exynos encoder core, once
inside the .enable() call and another time by .commit() itself.

The remove of the second call caused the wake of a bug, the operations
orders inside exynos_dp_commit was wrong and we had to move
exynos_dp_start_video() to be the last operation in there.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

hdmi_commit() was getting called twice by exynos encoder core, once inside
the .enable() call and another time by .commit() itself.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This struct was just representing encoder information, it was a member of
struct exynos_drm_encoder, so any code trying to access encoder data would
have to go through the encoder struct, get the display struct and then get
the data it want.

During this patchset we also realized that the only data
exynos_drm_encoder needs to store is the drm_encoder parent and the
exynos_drm_encoder_ops.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

All CRTCs can only be LCD, HDMI or VIDI, so basically all CRTCs will be a
possible CRTCs. This patch removes an extra function with switch that was
only checking if the CRTC type was one of those three above.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

These two display_ops are not used anywhere, remove them.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

phy_power_on() and phy_power_off() already checks for NULL pointer.
This patch removes the wrappers exynos_dp_phy_init() and
exynos_dp_phy_exit() since the only think they were doing was a check for
NULL phy.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The DRM Core doesn't have a dpms() operation anymore, everything
now is enable() or disable().
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Instead of blindly ignore the return value of enable_vblank return it
to the upper DRM layer for error handling.
Suggested-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to
src_{w,h} to make it similar to the atomic state names.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Now after the move to use drm_plane_state directly struct drm_plane_state
has many unused fields, along with others that weren't used before the
plane state change. Thus remove them all.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>