- 26 2月, 2010 1 次提交
-
-
由 Tilman Schmidt 提交于
Copy the mechanism from ser_/usb_gigaset to avoid producing spurious empty responses for CR/LF sequences from the device. Add a comment in all drivers documenting that behaviour. Correct an off by one error that might result in a one byte buffer overflow when receiving an unexpectedly long reply. Impact: minor bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2009 2 次提交
-
-
由 Tilman Schmidt 提交于
On the quest for the holy grail of checkpatch.pl silence. Impact: cosmetic Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
The CAPI interface incorrectly assumed that CAPI messages would always start at the beginning of the data buffer: fix by treating DATA_B3 messages as the link layer header to their payload data. This fix changes the way acknowledgement information is propagated through the hardware specific modules and thereby impacts the ISDN4Linux variant of the driver, too. Also some assumptions about methods not being called from interrupt context turned out to be unwarranted; fix by using dev_kfree_skb_any() wherever non-interrupt context isn't guaranteed. Impact: bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2009 3 次提交
-
-
由 Tilman Schmidt 提交于
Reorganize the code of the Gigaset driver, moving all isdn4linux dependencies to the source file i4l.c so that it can be replaced by a file capi.c interfacing to Kernel CAPI instead. Impact: refactoring, no functional change Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Add kerneldoc comments to some functions in the Gigaset driver. Impact: documentation Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Dump payload data consistently only when DEBUG_STREAM_DUMP debug bit is set. Impact: debugging aid Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2009 1 次提交
-
-
由 Tilman Schmidt 提交于
Drop a sanity check which doesn't serve any useful purpose anymore. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 5月, 2009 1 次提交
-
-
由 Roel Kluin 提交于
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2009 1 次提交
-
-
由 Tilman Schmidt 提交于
Don't generate the hex representation of the payload data if it isn't actually used afterwards. Impact: optimization Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 12月, 2008 2 次提交
-
-
由 Tilman Schmidt 提交于
Remove unnecessary #ifdef-s and #if-0-ed code sections. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Switch from private printk wrapper macros to using pr_err() and pr_info() from linux/kernel.h, at the same time unifying a few error messages. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2008 1 次提交
-
-
由 Tilman Schmidt 提交于
Convert atomic_t variables that don't actually use atomic_t functionality to int. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 3月, 2007 1 次提交
-
-
由 Tilman Schmidt 提交于
Mark some static arrays as const that aren't and shouldn't be modified, and remove incorrect static attribute from some variables. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Tilman Schmidt 提交于
Reduce the number of kernel messages the Gigaset drivers produce in case of an excessively long device response, from one per character exceeding the limit to one per overlong message. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 12月, 2006 1 次提交
-
-
由 Akinobu Mita 提交于
Use bitrev8 for gigaset isdn driver. Acked-by: NKarsten Keil <kkeil@suse.de> Cc: Kai Germaschewski <kai.germaschewski@gmx.de> Acked-by: NHansjoerg Lipp <hjlipp@web.de> Acked-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 4月, 2006 1 次提交
-
-
由 Tilman Schmidt 提交于
Fix a possible Oops in the Siemens Gigaset base driver when the device is unplugged while an ISDN connection is still active, and makes sure that the isdn4linux link level (LL) is properly informed if a connection is broken by the USB cable being unplugged. - Avoid unsafe checks of URB status fields outside the URB completion handlers, keep track of in-use URBs myself instead. - If an isochronous transfer URB completes with status==0, also check the status of the frame descriptors. - Verify length of interrupt messages received from the device. - Align the length limit on transmitted AT commands with the device documentation. - In case of AT response receive overrun, keep newly arrived instead of old unread data. - Remove redundant check of device ID in the USB probe function. - Correct and improve some comments and formatting. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Acked-by: NHansjoerg Lipp <hjlipp@web.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 4月, 2006 6 次提交
-
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Replace some atomic_t variables in the Gigaset drivers by non-atomic ones, using spinlocks instead to assure atomicity, as proposed in discussions on the linux-kernel mailing list. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Remove the private version of __skb_put() from the Siemens Gigaset drivers. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Eliminate the from_user argument from a debugging function, thus easing the job of sparse. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Remove the IFNULL debugging macros from the Gigaset drivers. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Improve error reporting of the Gigaset drivers, by using the dev_err/dev_warn/dev_info macros from device.h instead of err/warn/info from usb.h whereever possible. Also rename the private dbg macro to gig_dbg in order to avoid confusion with the macro of the same name in usb.h. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Source code formatting cleanups for the Siemens Gigaset drivers, such as line length, comments, removal of unused declarations, and typo corrections. It does not introduce any functional changes. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 3月, 2006 1 次提交
-
-
由 Hansjoerg Lipp 提交于
And: Tilman Schmidt <tilman@imap.cc> This patch adds the payload data handler for the connection-specific module "bas_gigaset". It contains the code for handling isochronous data transfers, HDLC framing and flow control. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-