1. 10 10月, 2008 6 次提交
    • P
      netlabel: Add network address selectors to the NetLabel/LSM domain mapping · 63c41688
      Paul Moore 提交于
      This patch extends the NetLabel traffic labeling capabilities to individual
      packets based not only on the LSM domain but the by the destination address
      as well.  The changes here only affect the core NetLabel infrastructre,
      changes to the NetLabel KAPI and individial protocol engines are also
      required but are split out into a different patch to ease review.
      Signed-off-by: NPaul Moore <paul.moore@hp.com>
      Reviewed-by: NJames Morris <jmorris@namei.org>
      63c41688
    • P
      netlabel: Add a generic way to create ordered linked lists of network addrs · 61e10682
      Paul Moore 提交于
      Create an ordered IP address linked list mechanism similar to the core
      kernel's linked list construct.  The idea behind this list functionality
      is to create an extensibile linked list ordered by IP address mask to
      ease the matching of network addresses.  The linked list is ordered with
      larger address masks at the front of the list and shorter address masks
      at the end to facilitate overriding network entries with individual host
      or subnet entries.
      Signed-off-by: NPaul Moore <paul.moore@hp.com>
      Reviewed-by: NJames Morris <jmorris@namei.org>
      61e10682
    • P
      netlabel: Replace protocol/NetLabel linking with refrerence counts · b1edeb10
      Paul Moore 提交于
      NetLabel has always had a list of backpointers in the CIPSO DOI definition
      structure which pointed to the NetLabel LSM domain mapping structures which
      referenced the CIPSO DOI struct.  The rationale for this was that when an
      administrator removed a CIPSO DOI from the system all of the associated
      NetLabel LSM domain mappings should be removed as well; a list of
      backpointers made this a simple operation.
      
      Unfortunately, while the backpointers did make the removal easier they were
      a bit of a mess from an implementation point of view which was making
      further development difficult.  Since the removal of a CIPSO DOI is a
      realtively rare event it seems to make sense to remove this backpointer
      list as the optimization was hurting us more then it was helping.  However,
      we still need to be able to track when a CIPSO DOI definition is being used
      so replace the backpointer list with a reference count.  In order to
      preserve the current functionality of removing the associated LSM domain
      mappings when a CIPSO DOI is removed we walk the LSM domain mapping table,
      removing the relevant entries.
      Signed-off-by: NPaul Moore <paul.moore@hp.com>
      Reviewed-by: NJames Morris <jmorris@namei.org>
      b1edeb10
    • P
      selinux: Fix missing calls to netlbl_skbuff_err() · dfaebe98
      Paul Moore 提交于
      At some point I think I messed up and dropped the calls to netlbl_skbuff_err()
      which are necessary for CIPSO to send error notifications to remote systems.
      This patch re-introduces the error handling calls into the SELinux code.
      Signed-off-by: NPaul Moore <paul.moore@hp.com>
      Acked-by: NJames Morris <jmorris@namei.org>
      dfaebe98
    • P
      netlabel: Remove unneeded in-kernel API functions · 948a7243
      Paul Moore 提交于
      After some discussions with the Smack folks, well just Casey, I now have a
      better idea of what Smack wants out of NetLabel in the future so I think it
      is now safe to do some API "pruning".  If another LSM comes along that
      needs this functionality we can always add it back in, but I don't see any
      LSMs on the horizon which might make use of these functions.
      
      Thanks to Rami Rosen who suggested removing netlbl_cfg_cipsov4_del() back
      in February 2008.
      Signed-off-by: NPaul Moore <paul.moore@hp.com>
      Reviewed-by: NJames Morris <jmorris@namei.org>
      948a7243
    • P
      netlabel: Fix some sparse warnings · 56196701
      Paul Moore 提交于
      Fix a few sparse warnings.  One dealt with a RCU lock being held on error,
      another dealt with an improper type caused by a signed/unsigned mixup while
      the rest appeared to be caused by using rcu_dereference() in a
      list_for_each_entry_rcu() call.  The latter probably isn't a big deal, but
      I derive a certain pleasure from knowing that the net/netlabel is nice and
      clean.
      
      Thanks to James Morris for pointing out the issues and demonstrating how
      to run sparse.
      Signed-off-by: NPaul Moore <paul.moore@hp.com>
      56196701
  2. 20 7月, 2008 1 次提交
  3. 15 7月, 2008 1 次提交
  4. 11 7月, 2008 1 次提交
  5. 28 6月, 2008 1 次提交
    • P
      netlabel: Fix a problem when dumping the default IPv6 static labels · 59d88c00
      Paul Moore 提交于
      There is a missing "!" in a conditional statement which is causing entries to
      be skipped when dumping the default IPv6 static label entries.  This can be
      demonstrated by running the following:
      
       # netlabelctl unlbl add default address:::1 \
                                       label:system_u:object_r:unlabeled_t:s0
       # netlabelctl -p unlbl list
      
      ... you will notice that the entry for the IPv6 localhost address is not
      displayed but does exist (works correctly, causes collisions when attempting
      to add duplicate entries, etc.).
      Signed-off-by: NPaul Moore <paul.moore@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      59d88c00
  6. 19 5月, 2008 1 次提交
  7. 28 4月, 2008 1 次提交
  8. 18 4月, 2008 1 次提交
  9. 26 3月, 2008 1 次提交
  10. 18 2月, 2008 2 次提交
  11. 13 2月, 2008 4 次提交
  12. 06 2月, 2008 1 次提交
  13. 30 1月, 2008 7 次提交
  14. 21 12月, 2007 1 次提交
  15. 26 10月, 2007 1 次提交
  16. 11 10月, 2007 1 次提交
  17. 08 8月, 2007 1 次提交
  18. 02 8月, 2007 1 次提交
  19. 19 7月, 2007 1 次提交
    • P
      SELinux: enable dynamic activation/deactivation of NetLabel/SELinux enforcement · 23bcdc1a
      Paul Moore 提交于
      Create a new NetLabel KAPI interface, netlbl_enabled(), which reports on the
      current runtime status of NetLabel based on the existing configuration.  LSMs
      that make use of NetLabel, i.e. SELinux, can use this new function to determine
      if they should perform NetLabel access checks.  This patch changes the
      NetLabel/SELinux glue code such that SELinux only enforces NetLabel related
      access checks when netlbl_enabled() returns true.
      
      At present NetLabel is considered to be enabled when there is at least one
      labeled protocol configuration present.  The result is that by default NetLabel
      is considered to be disabled, however, as soon as an administrator configured
      a CIPSO DOI definition NetLabel is enabled and SELinux starts enforcing
      NetLabel related access controls - including unlabeled packet controls.
      
      This patch also tries to consolidate the multiple "#ifdef CONFIG_NETLABEL"
      blocks into a single block to ease future review as recommended by Linus.
      Signed-off-by: NPaul Moore <paul.moore@hp.com>
      Signed-off-by: NJames Morris <jmorris@namei.org>
      23bcdc1a
  20. 17 7月, 2007 1 次提交
    • M
      Audit: add TTY input auditing · 522ed776
      Miloslav Trmac 提交于
      Add TTY input auditing, used to audit system administrator's actions.  This is
      required by various security standards such as DCID 6/3 and PCI to provide
      non-repudiation of administrator's actions and to allow a review of past
      actions if the administrator seems to overstep their duties or if the system
      becomes misconfigured for unknown reasons.  These requirements do not make it
      necessary to audit TTY output as well.
      
      Compared to an user-space keylogger, this approach records TTY input using the
      audit subsystem, correlated with other audit events, and it is completely
      transparent to the user-space application (e.g.  the console ioctls still
      work).
      
      TTY input auditing works on a higher level than auditing all system calls
      within the session, which would produce an overwhelming amount of mostly
      useless audit events.
      
      Add an "audit_tty" attribute, inherited across fork ().  Data read from TTYs
      by process with the attribute is sent to the audit subsystem by the kernel.
      The audit netlink interface is extended to allow modifying the audit_tty
      attribute, and to allow sending explanatory audit events from user-space (for
      example, a shell might send an event containing the final command, after the
      interactive command-line editing and history expansion is performed, which
      might be difficult to decipher from the TTY input alone).
      
      Because the "audit_tty" attribute is inherited across fork (), it would be set
      e.g.  for sshd restarted within an audited session.  To prevent this, the
      audit_tty attribute is cleared when a process with no open TTY file
      descriptors (e.g.  after daemon startup) opens a TTY.
      
      See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a
      more detailed rationale document for an older version of this patch.
      
      [akpm@linux-foundation.org: build fix]
      Signed-off-by: NMiloslav Trmac <mitr@redhat.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Cc: Paul Fulghum <paulkf@microgate.com>
      Cc: Casey Schaufler <casey@schaufler-ca.com>
      Cc: Steve Grubb <sgrubb@redhat.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      522ed776
  21. 09 6月, 2007 1 次提交
  22. 08 6月, 2007 1 次提交
  23. 26 4月, 2007 1 次提交
  24. 01 3月, 2007 1 次提交
  25. 11 2月, 2007 1 次提交