lsblk should be able to pick up stacking device driver relations
involving DRBD conveniently.

Even though upstream kernel since 2011 says
	"DON'T USE THIS UNLESS YOU'RE ALREADY USING IT."
a new user has been added since (bcache),
which sets the precedences for us to use it as well.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The effective data generation ID may be interesting for debugging
purposes of scenarios involving diskless states.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The intention is to reduce CPU utilization. Recent measurements
unveiled that the current performance bottleneck is CPU utilization
on the receiving node. The asender thread became CPU limited.

One of the main points is to eliminate the idr_for_each_entry() loop
from the sending acks code path.

One exception in that is sending back ping_acks. These stay
in the ack-receiver thread. Otherwise the logic becomes too
complicated for no added value.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This prepares the next patch where the sending on the meta (or
control) socket is moved to a dedicated workqueue.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Don't blame the peer for being unresponsive,
if we did not even ask the question yet.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The events2 command originates from drbd-9 development. It features
more information but requires a incompatible change in output
format.
Therefore the previous events command continues to exist, the new
improved events2 command becomes available now.

This prepares the user-base for a later switch to the complete
drbd9 code base.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of using a rwlock for synchronizing state changes across
resources, take the request locks of all resources for global state
changes.  Use resources_mutex to serialize global state changes.

This means that taking the request lock of a resource is now enough to
prevent changes of that resource.  (Previously, a read lock on the
global state lock was needed as well.)
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Also change the enum values to all-capital letters.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

No functional changes in this patch, but it prepares us for returning
a more useful cookie related to the IO that was queued up.
Signed-off-by: NJens Axboe <axboe@fb.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>

As generic_make_request() is now able to handle arbitrarily sized bios,
it's no longer necessary for each individual block driver to define its
own ->merge_bvec_fn() callback. Remove every invocation completely.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@kernel.org>
Cc: ceph-devel@vger.kernel.org
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits)
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
[dpark: also remove ->merge_bvec_fn() in dm-thin as well as
 dm-era-target, and resolve merge conflicts]
Signed-off-by: NDongsu Park <dpark@posteo.net>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.

This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it.  c files
which need access to more backing-dev details now include
backing-dev.h directly.  This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.

v2: fs/fat build failure fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

Old backward-compat cruft
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Avoid generic netlink calls in other parts of the code base.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

 . Update comments
 . drbd_set_{in,out_of}_sync(): Remove unused parameters
 . Move common code into adm_del_resource()
 . Redefine ERR_MINOR_EXISTS -> ERR_MINOR_OR_VOLUME_EXISTS
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

These macros can easily be replaced with its definition.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Now they follow the _endio naming sheme.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Rename local variable 'ds' to 'disk_state' or 'data_size'.
'dgs' to 'digest_size'
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add a per-connection worker thread callback_history
with timing details, call site and callback function.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

* Add details about pending meta data operations to in_flight_summary.

* Report number of requests waiting for activity log transactions.

* timing details of peer_requests to in_flight_summary.

* FLUSH details
  DRBD devides the incoming request stream into "epochs",
  in which peers are allowed to re-order writes independendly.

  These epochs are separated by P_BARRIER on the replication link.
  Such barrier packets, depending on configuration, may cause
  the receiving side to drain the lower level device request queues
  and call blkdev_issue_flush().

  This is known to be an other major source of latency in DRBD.

  Track timing details of calls to blkdev_issue_flush(),
  and add them to in_flight_summary.

* data socket stats
  To be able to diagnose bottlenecks and root causes of "slow" IO on DRBD,
  it is useful to see network buffer stats along with the timing details of
  requests, peer requests, and meta data IO.

* pending bitmap IO timing details to in_flight_summary.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Add new debugfs hierarchy /sys/kernel/debug/
  drbd/
    resources/
      $resource_name/connections/peer/$volume_number/
      $resource_name/volumes/$volume_number/
    minors/$minor_number -> ../resources/$resource_name/volumes/$volume_number/

Followup commits will populate this hierarchy with files containing
statistics, diagnostic information and some attribute data.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Track start and submit time of bitmap operations, and
add pending bitmap IO contexts to a new pending_bitmap_io list.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

To be able to present timing details in debugfs,
we need to track preparation/submit times of peer requests.

Track peer request flags early,
before they are put on the epoch_entry lists.

Waiting for activity log transactions may be a major latency factor.
We want to be able to present the peer_request state accurately in
debugfs, and what it is waiting for.

Consistently mark/unmark peer requests with EE_CALL_AL_COMPLETE_IO.
Set it only *after* calling drbd_al_begin_io(),
clear it as soon as we call drbd_al_complete_io().
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Background resynchronisation does some "side-stepping", or throttles
itself, if it detects application IO activity, and the current resync
rate estimate is above the configured "cmin-rate".

What was not detected: if there is no application IO,
because it blocks on activity log transactions.

Introduce a new atomic_t ap_actlog_cnt, tracking such blocked requests,
and count non-zero as application IO activity.
This counter is exposed at proc_details level 2 and above.

Also make sure to release the currently locked resync extent
if we side-step due to such voluntary throttling.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

A request that is to be shipped to the peer goes through a few stages:
- queued
- sent, waiting for ack
- ack received, waiting for "barrier ack", which is re-order epoch being
  closed on the peer by acknowledging a "cache flush" equivalent
  on the lower level device.

In the later two stages, depending on protocol, we may have already
completed this request to the upper layers, so it won't be found anymore
on device->pending_master_completion[] lists.

Track the oldest request yet to be sent (req_next), the oldest not yet
acknowledged (req_ack_pending) and the oldest "still waiting for
something from the peer" (req_not_net_done), doing short list walks on
the transfer log to find the next pending one whenever such a request
makes progress.

Now we have a fast way to look up the oldest requests,
don't do a transfer log walk every time.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Adding requests to per-device fifo lists as soon as possible after
allocating them leaves a simple list_first_entry_or_null() to find the
oldest request, regardless what it is still waiting for.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Record (in jiffies) how much time a request spends in which stages.
Followup commits will use and present this additional timing information
so we can better locate and tackle the root causes of latency spikes,
or present the backlog for asynchronous replication.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

For diagnostic purposes, track intent, start time
and latest submit time of meta data IO.

Move separate members from struct drbd_device
into the embeded struct drbd_md_io.
s/md_io_(page|in_use)/md_io.\1/
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

The only user of drbd_md_flush was bm_rw(),
and it is always followed by either a drbd_md_sync(),
or an al_write_transaction(), which, if so configured,
both end up submiting a FLUSH|FUA request anyways.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

We sometimes do
    if (list_empty(&w.list))
	drbd_queue_work(&q, &w.list);

Removal (list_del_init) may happen outside all locks, after all
pending work entries have been moved to an on-stack local work list.

For not dynamically allocated, but embeded, work structs,
we must avoid to re-add until it really was removed.

Move that list_empty check inside the spin_lock(&q->q_lock)
within the helper function, and change to list_empty_careful().

This may have been the reason for a list_add corruption
inside drbd_queue_work().
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Cosmetic change only.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Just about all of these have been converted to __func__,
so convert the last uses.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Checksum based resync trades CPU cycles for network bandwidth,
in situations where we expect much of the to-be-resynced blocks
to be actually identical on both sides already.

In a "network hickup" scenario, it won't help:
all to-be-resynced blocks will typically be different.

The use case is for the resync of *potentially* different blocks
after crash recovery -- the crash recovery had marked larger areas
(those covered by the activity log) as need-to-be-resynced,
just in case. Most of those blocks will be identical.

This option makes it possible to configure checksum based resync,
but only actually use it for the first resync after primary crash.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

We intentionally do not serialize /proc/drbd access with
internal state changes or statistic updates.

Because of that, cat /proc/drbd  may race with resync just being
finished, still see the sync state, and find information about
number of blocks still to go, but then find the total number
of blocks within this resync has just been reset to 0
when accessing it.

This now produces bogus numbers in the resync speed estimates.

Fix by accessing all relevant data only once,
and fixing it up if "still to go" happens to be more than "total".
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

Get rid of dump_stack() debug statements.

There is no point whatsoever in registering and unregistering a reboot
notifier that doesn't do anything.

The intention was to switch to an "emergency read-only" mode,
so we won't have to resync the full activity log just because
we had been Primary before the reboot.

Once we have that implemented, we may re-introduce the reboot notifier.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

The last user was al_write_transaction, if called with "delegate",
and the last user to call it with "delegate = true" was the receiver
thread, which has no need to delegate, but can call it himself.

Finally drop the delegate parameter, drop the extra
w_al_write_transaction callback, and drop drbd_queue_work_front.

Do not (yet) change dequeue_work_item to dequeue_work_batch, though.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

This replaces the md_sync_work member of struct drbd_device
by a new MD_SYNC "work bit" in device->flags.

This replaces the resync_start_work member of struct drbd_device
by a new RS_START "work bit" in device->flags.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

The recent fix to put_ldev() (correct ordering of access to local_cnt
and state.disk; memory barrier in __drbd_set_state) guarantees
that the cleanup happens exactly once.

However it does not yet guarantee that the cleanup happens from worker
context, the last put_ldev() may still happen from atomic context,
which must not happen: blkdev_put() may sleep.

Fix this by scheduling the cleanup to the worker instead,
using a couple more bits in device->flags and a new helper,
drbd_device_post_work().

Generalized the "resync progress" work to cover these new work bits.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
IP: bd_release+0x21/0x70
Process drbd_w_t7146
Call Trace:
 close_bdev_exclusive
 drbd_free_ldev		[drbd]
 drbd_ldev_destroy	[drbd]
 w_after_state_ch	[drbd]

Race probably went like this:
  state.disk = D_FAILED

... first one to hit zero during D_FAILED:
   put_ldev() /* ----------------> 0 */
     i = atomic_dec_return()
     if (i == 0)
       if (state.disk == D_FAILED)
         schedule_work(go_diskless)
                                /* 1 <------ */ get_ldev_if_state()
   go_diskless()
      do_some_pre_cleanup()                     corresponding put_ldev():
      force_state(D_DISKLESS)   /* 0 <------ */ i = atomic_dec_return()
                                                if (i == 0)
        atomic_inc() /* ---------> 1 */
        state.disk = D_DISKLESS
        schedule_work(after_state_ch)           /* execution pre-empted by IRQ ? */

   after_state_ch()
     put_ldev()
       i = atomic_dec_return()  /* 0 */
       if (i == 0)
         if (state.disk == D_DISKLESS)            if (state.disk == D_DISKLESS)
           drbd_ldev_destroy()                      drbd_ldev_destroy();

Trying to fix this by checking the disk state *before* the
atomic_dec_return(), which implies memory barriers, and by inserting
extra memory barriers around the state assignment in __drbd_set_state().
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>

This fixes one recent regresion,
and one long existing bug.

The bug:
drbd_try_clear_on_disk_bm() assumed that all "count" bits have to be
accounted in the resync extent corresponding to the start sector.

Since we allow application requests to cross our "extent" boundaries,
this assumption is no longer true, resulting in possible misaccounting,
scary messages
("BAD! sector=12345s enr=6 rs_left=-7 rs_failed=0 count=58 cstate=..."),
and potentially, if the last bit to be cleared during resync would
reside in previously misaccounted resync extent, the resync would never
be recognized as finished, but would be "stalled" forever, even though
all blocks are in sync again and all bits have been cleared...

The regression was introduced by
    drbd: get rid of atomic update on disk bitmap works

For an "empty" resync (rs_total == 0), we must not "finish" the
resync on the SyncSource before the SyncTarget knows all relevant
information (sync uuid).  We need to wait for the full round-trip,
the SyncTarget will then explicitly notify us.

Also for normal, non-empty resyncs (rs_total > 0), the resync-finished
condition needs to be tested before the schedule() in wait_for_work, or
it is likely to be missed.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>