- 16 8月, 2008 2 次提交
-
-
由 Cyrill Gorcunov 提交于
- remove redundant read of APIC_LVR register in 64bit mode - APIC is always integrated for 64bit mode so gcc will eliminate lapic_is_integrated call Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Acked-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
No changes on binary level Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Acked-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 8月, 2008 9 次提交
-
-
由 Cyrill Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
We are able to use clock_event_device as it's done in 64bit apic code so lets get rid of local_apic_timer_verify_ok variable. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
There is no need to clear APIC twice since disable_local_APIC will clear it anyway. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
To be able to unify this function we RE-introduce APIC_DIVISOR for 64bit mode. This snipped was eliminated in some time ago in a sake of clenup but now we need it again since it allow up to get rid of #ifdef(s). And lapic_is_integrated call is added in apic_64.c but since we always have APIC integrated on 64bit cpu compiler will ignore this call. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
Get rid of local_apic_timer_disabled and use disable_apic_timer instead. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
-
由 Hiroshi Shimamoto 提交于
In unistd_64.h, the guard macro _ASM_X86_64_UNISTD_H_ is renamed to ASM_X86__UNISTD_64_H. This change should be applied to arch/um/sys-x86_64/syscall_table.c. Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 8月, 2008 29 次提交
-
-
由 Ingo Molnar 提交于
-
由 Ingo Molnar 提交于
-
由 Ingo Molnar 提交于
Conflicts: arch/x86/kernel/genapic_64.c include/asm-x86/kvm_host.h Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Conflicts: include/asm-x86/dma-mapping.h Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (47 commits) usb: musb: pass configuration specifics via pdata usb: musb: fix hanging when rmmod gadget driver USB: Add MUSB and TUSB support USB: serial: remove CONFIG_USB_DEBUG from sierra and option drivers USB: Add vendor/product id of ZTE MF628 to option USB: quirk PLL power down mode USB: omap_udc: fix compilation with debug enabled usb: cdc-acm: drain writes on close usb: cdc-acm: stop dropping tx buffers usb: cdc-acm: bugfix release() usb gadget: issue notifications from ACM function usb gadget: remove needless struct members USB: sh: r8a66597-hcd: fix disconnect regression USB: isp1301: fix compilation USB: fix compiler warning fix usb-storage: unusual_devs entry for Nokia 5300 USB: cdc-acm.c: Fix compile warnings USB: BandRich BandLuxe C150/C250 HSPA Data Card Driver USB: ftdi_sio: add support for PHI Fisco data cable (FT232BM based, VID/PID 0403:e40b) usb: isp1760: don't be noisy about short packets. ...
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: CRED: Introduce credential access wrappers
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) netns: Fix crash by making igmp per namespace bnx2x: Version update bnx2x: Checkpatch compliance bnx2x: Spelling mistakes bnx2x: Minor code improvements bnx2x: Driver info bnx2x: 1G LED does not turn off bnx2x: 8073 PHY changes bnx2x: Change GPIO for any port bnx2x: Pause settings bnx2x: Link order with external PHY bnx2x: No LRO without Rx checksum bnx2x: Wrong structure size bnx2x: WoL capability bnx2x: Clearing MAC addresses filters bnx2x: Delay in while loops bnx2x: PBA Table Page Alignment Workaround bnx2x: Self-test false positive bnx2x: Memory allocation bnx2x: HW attention lock ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Handle stack trace attempts before irqstacks are setup. sparc64: Implement IRQ stacks. sparc: remove include of linux/of_device.h from asm/of_device.h sparc64: Fix recursion in stack overflow detection handling. sparc/drivers: use linux/of_device.h instead of asm/of_device.h sparc64: Don't MAGIC_SYSRQ ifdef smp_fetch_global_regs and support code.
-
由 Felipe Balbi 提交于
Use platform_data to pass musb configuration-specific details to musb driver. This patch will prevent that other platforms selecting HAVE_CLK and enabling musb won't break tree building. The other parts of it will come when linux-omap merge up more omap2/3 board-files. Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Felipe Balbi 提交于
If we try to modprobe a second gadget driver before rmmoding the first one, the reference for the first gadget driver would get NULLed avoiding usb to change gadget drivers later. Cc: David Brownell <david-b@pacbell.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Felipe Balbi 提交于
This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
These drivers should not be relying on CONFIG_USB_DEBUG. By doing this, it prevents users of kernels that do not enable this option from enabling debugging in these drivers, unlike all other usb-serial drivers. Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Martin 提交于
This adds the vendor and product id (19d2:0015) of the ZTE MF628 HSDPA modem to the option driver. It still needs a mode switch command issued beforehand, this is currently handled by a userspace tool. Signed-off-by: NOliver Martin <oliver.martin@student.tuwien.ac.at> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Libin Yang 提交于
On some AMD 700 series southbridges, ISO OUT transfers (such as audio playback through speakers) on the USB OHCI controller may be corrupted when an A-Link express power saving feature is active. PLL power down mode in conjunction with link power management feature L1 being enabled is the bad combination ... this patch prevents them from being enabled when ISO transfers are pending. Signed-off-by: NCrane Cai <crane.cai@amd.com> Signed-off-by: NLibin Yang <libin.yang@amd.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dmitry Baryshkov 提交于
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Add a mechanism to let the write queue drain naturally before closing the TTY, rather than always losing that data. There is a timeout, so it can't wait too long. Provide missing locking inside acm_wb_is_avail(); it matters more now. Note, this presumes an earlier patch was applied, removing a call to this routine where the lock was held. Slightly improved diagnostics on write URB completion, so we can tell when a write URB gets killed and, if so, how much data it wrote first ... and so that I/O path is normally silent (and can't much change timings). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
The "increase cdc-acm write throughput" patch left in place two now-obsolete mechanisms, either of which can make the cdc-acm driver drop TX data (nasty!). This patch removes them: - The write_ready flag ... if an URB and buffer were found, they can (and should!) always be used. - TX path acm_wb_is_used() ... used when the buffer was just allocated, so that check is pointless. Also fix a won't-yet-matter leak of a write buffer on a disconnect path. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: David Engraf <david.engraf@netcom.eu> Acked-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Bugfixes to the usb_driver_release_interface() usage; (a) make sure releasing *either* interface first will release the other, instead of insisting it be the control interface; (b) remove the recently-added self-deadlock. (The "fix disconnect bug in cdc-acm" patch was incomplete and incorrect.) Plus a small "sparse" fix: rename a local variable so it doesn't shadow a function parameter. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Update the CDC-ACM gadget code to support the peripheral-to-host notifications when the tty is opened or closed, or issues a BREAK. The serial framework code calls new generic hooks; right now only CDC-ACM uses those hooks. This resolves several REVISIT comments in the code. (Based on a patch from Felipe Balbi.) Note that this doesn't expose USB_CDC_CAP_BRK to the host, since this code still rejects USB_CDC_REQ_SEND_BREAK control requests for host-to-peripheral BREAK signaling (received via /dev/ttyGS*). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This removes some unused members from the various USB functions. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yoshihiro Shimoda 提交于
fix the regression in commit 29fab0cd that this driver executed reconnection processing when disconnected some devices. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dmitry Baryshkov 提交于
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1123b) fixes a compiler warning: do_unbind_rebind() is defined but not used if CONFIG_PM=n. Problem originally found and initial patch submitted by Alexander Beregalov <a.beregalov@gmail.com>. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1120) adds an unusual_devs entry for the Nokia 5300. Maybe once Nokia releases the Symbian code we'll be able to fix all the problems it has with the USB mass-storage protocol. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Tested-by: NCedric Godin <cedric@belbone.be> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Takashi Iwai 提交于
The irq flags should be unsigned long. CC [M] drivers/usb/class/cdc-acm.o drivers/usb/class/cdc-acm.c: In function 'acm_waker': drivers/usb/class/cdc-acm.c:527: warning: comparison of distinct pointer types lacks a cast drivers/usb/class/cdc-acm.c:529: warning: comparison of distinct pointer types lacks a cast Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Leon Leong 提交于
This patch adds the Product ID for the BandLuxe C150/C250 3.5G data card series from BandRich Inc. After detection, the data card works fine. It was patched against kernel 2.6.27-rc1 with -mm patch Signed-off-by: NLeon Leong <upleong@bandrich.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lex Ross 提交于
Support for PHI Fisco USB to Serial data cable (FTDI FT232BM based). PHI Fisco cable is supplied for connecting Philips Xenium 9@9++ mobile phones. PIDs were missing. Tested successfully with PHI Fisco Data Cable (VID/PID 0403:e40b) Signed-off-by: NLex V. Ross <lross@mail.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sebastian Siewior 提交于
According to Alan Stern, short packets are quite normal under certain circumstances. This printk was triggered by usb to serial converters on every packet and some usb sticks triggered a few of those while plugging the stick. This printks are now hidden unless USB debug mode is activated. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Enrico Scholz 提交于
ISP1760 requires a delay of 90ns between programming the address and reading the data. Current driver solves this by a mdelay(1) which is very heavy weighted and slow. This patch applies the workaround from the ISP1760 FAQ by using two different banks for PTD and payload data and using a common wait for them. This wait is done by an additional ISP1760 access (whose timing constraints guarantee the 90ns delay). This improves speed when reading from an USB stick from: $ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638 real 1m 15.43s user 0m 0.44s sys 0m 39.46s to $ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638 real 0m 18.53s user 0m 0.16s sys 0m 12.97s [bigeasy@linutronix.de: fixed comment formating, moved define into header file, obey 80 char rule] Signed-off-by: NEnrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-