提交 · 638a1a01d36a1496244fb1367c5b79c6fcd62d3d · openeuler / raspberrypi-kernel

19 5月, 2014 34 次提交

qla2xxx: Delay driver unload if there is any pending activity going on. · 638a1a01

由 Sawan Chandak 提交于 4月 11, 2014

Signed-off-by: NSawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

638a1a01

qla2xxx: ISP27xx queue index shadow registers. · 7c6300e3

由 Joe Carnuccio 提交于 4月 11, 2014

For ISP27xx use the request/response queue index shadow registers
to avoid directly access them on the PCI bus.
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

7c6300e3

qla2xxx: ISP27xx firmware dump template spec updates (including T274). · c0496401

由 Joe Carnuccio 提交于 4月 11, 2014

Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

c0496401

qla2xxx: Reduce the time we wait for a command to complete during SCSI error handling. · 478c3b03

由 Chad Dupuis 提交于 4月 11, 2014

Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

478c3b03

qla2xxx: Check the QLA8044_CRB_DRV_ACTIVE_INDEX register when we are not the owner of the reset. · a018d8ff

由 Hiral Patel 提交于 4月 11, 2014

Signed-off-by: NHiral Patel <hiral.patel@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

a018d8ff

qla2xxx: Clear loop_id for ports that are marked lost during fabric scanning. · 1a5c69bf

由 Chad Dupuis 提交于 4月 11, 2014

Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

1a5c69bf

qla2xxx: Adjust adapter reset routine to the changes in firmware specification for ISPFx00. · 42543fb9

由 Armen Baloyan 提交于 4月 11, 2014

Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

42543fb9

qla2xxx: Avoid escalating the SCSI error handler if the command is not found in firmware. · f934c9d0

由 Chad Dupuis 提交于 4月 11, 2014

If the firmware cannot find the command specified then return SUCCESS to the
error handler so as not to needlessly escalate.  Also cleanup the resources for
the command since we cannot expect the original command to returned in
interrupt context.
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

f934c9d0

qla2xxx: IOCB data should be copied to I/O mem using memcpy_toio. · f79a84bf

由 Atul Deshmukh 提交于 4月 11, 2014

Signed-off-by: NAtul Deshmukh <atul.deshmukh@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

f79a84bf

qla2xxx: ISP8044 poll ipmdio bus timeout improvement. · 50a9ff30

由 Joe Carnuccio 提交于 4月 11, 2014

Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

50a9ff30

qla2xxx: Remove unnecessary printk_ratelimited from qla_nx2.c · b6ae5ba6

由 Chad Dupuis 提交于 4月 11, 2014

Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

b6ae5ba6

qla2xxx: Include <delay.h> file for msleep declartion in qla_nx2.c file. · 50256357

由 Atul Deshmukh 提交于 4月 11, 2014

Signed-off-by: NAtul Deshmukh <atul.deshmukh@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

50256357

qla2xxx: Use proper log message for flash lock failed error. · 27f4b72f

由 Atul Deshmukh 提交于 4月 11, 2014

Signed-off-by: NAtul Deshmukh <atul.deshmukh@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

27f4b72f

qla2xxx: Decrease pci access for response queue processing for ISPFX00. · 9929c478

由 Armen Baloyan 提交于 4月 11, 2014

Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

9929c478

qla2xxx: Change copyright year to 2014 in all the source files. · bd21eaf9

由 Armen Baloyan 提交于 4月 11, 2014

Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

bd21eaf9

qla2xxx: Update entry type 270 to match spec update. · fbce4f49

由 Joe Carnuccio 提交于 4月 11, 2014

Increment the address by 4 on each iteration.
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

fbce4f49

qla2xxx: Enable fw_dump_size for ISP8044. · cf3af76b

由 Hiral Patel 提交于 4月 11, 2014

Signed-off-by: NHiral Patel <hiral.patel@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

cf3af76b

qla2xxx: Introduce fw_dump_flag to track fw dump progress. · 61f098dd

由 Hiral Patel 提交于 4月 11, 2014

Signed-off-by: NHiral Patel <hiral.patel@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

61f098dd

qla2xxx: Remove unnecessary delays from fw dump code path. · 2f389fc4

由 Hiral Patel 提交于 4月 11, 2014

Signed-off-by: NHiral Patel <hiral.patel@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

2f389fc4

qla2xxx: Track the process when the ROM_LOCK failure happens · 4babb90e

由 Hiral Patel 提交于 4月 11, 2014

Signed-off-by: NHiral Patel <hiral.patel@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

4babb90e

qla2xxx: Correction to ISP27xx template entry types 256 and 258. · 7095388f

由 Joe Carnuccio 提交于 4月 11, 2014

The window address inserted into the dump should be have been
incremented by 1 rather than 4.
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

7095388f

qla2xxx: Add ISP8044 serdes bsg interface. · e8887c51

由 Joe Carnuccio 提交于 4月 11, 2014

Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

e8887c51

qla2xxx: Check for peg alive counter and clear any outstanding mailbox command. · 7012532d

由 Giridhar Malavali 提交于 4月 11, 2014

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

7012532d

qla2xxx: Support of new firmware dump opcodes QLA8044_RDDFE(38),... · 804df800

由 Pratik Mohanty 提交于 4月 11, 2014

qla2xxx: Support of new firmware dump opcodes QLA8044_RDDFE(38), QLA8044_RDMDIO(39),QLA8044_POLLWR(40).
Signed-off-by: NPratik Mohanty <pratik.mohanty@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

804df800

qla2xxx: Allow the next firmware dump if the previous dump capture fails for ISP8044. · edaa5c74

由 Saurav Kashyap 提交于 4月 11, 2014

Signed-off-by: NGiridhar Malavali <giridhar.malvali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

edaa5c74

qla2xxx: Add pci device id 0x2271. · 2c5bbbb2

由 Joe Carnuccio 提交于 4月 11, 2014

Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

2c5bbbb2

qla2xxx: Issue abort command for outstanding commands during cleanup when only firmware is alive. · af13b700

由 Giridhar Malavali 提交于 4月 11, 2014

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

af13b700

qla2xxx: Log when device state is moved to failed state. · 4fa0c668

由 Giridhar Malavali 提交于 4月 11, 2014

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

4fa0c668

qla2xxx: Correct ISP83xx/ISP27xx mislogic in setting out_mb in qla25xx_init_req_que(). · ba4828b7

由 Joe Carnuccio 提交于 4月 11, 2014

Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

ba4828b7

qla2xxx: Allow ISP83XX and ISP27XX both to write req_q_out register. · 29db41c3

由 Joe Carnuccio 提交于 4月 11, 2014

Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

29db41c3

qla2xxx: Correct operations for ISP27xx template types 270 and 271. · 0d90c34c

由 Joe Carnuccio 提交于 4月 11, 2014

Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

0d90c34c

qla2xxx: Do not schedule reset when one is already active when receiving an invalid status handle. · acd3ce88

由 Chad Dupuis 提交于 4月 11, 2014

If an adapter reset is already in progress, do not schedule another one when
we receive an invalid status handle.
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

acd3ce88

qla2xxx: Wait for reset completion without lock for ISPFX00. · ec1937a2

由 Saurav Kashyap 提交于 4月 11, 2014

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

ec1937a2

megaraid_sas: fix a small problem when reading state value from hw · bc6ac5e8

由 Tomas Henzl 提交于 4月 01, 2014

When the driver reads state values from the hw it might happen that
different values are read in subsequent reads and this can cause problems,
this may lead to a timeout in this function and a non working adapter.

Cc: Adam Radford <aradford@gmail.com>
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NShintaro Minemoto <fj3207hq@aa.jp.fujitsu.com>
Acked-by: NSumit Saxena <sumit.saxena@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

bc6ac5e8

08 5月, 2014 1 次提交

mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req" · 98fcc576

由 Micky Ching 提交于 4月 29, 2014

This reverts commit c42deffd.

commit <mmc: rtsx: add support for pre_req and post_req> did use
mutex_unlock() in tasklet, but mutex_unlock() can't be used in
tasklet(atomic context). The driver needs to use mutex to avoid
concurrency, so we can't use tasklet here, the patch need to be
removed.

The spinlock host->lock and pcr->lock may deadlock, one way to solve
the deadlock is remove host->lock in sd_isr_done_transfer(), but if
using workqueue the we can avoid using the spinlock and also avoid
the problem.
Signed-off-by: NMicky Ching <micky_ching@realsil.com.cn>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

98fcc576

07 5月, 2014 2 次提交

agp: info leak in agpioc_info_wrap() · 3ca9e5d3

由 Dan Carpenter 提交于 5月 06, 2014

On 64 bit systems the agp_info struct has a 4 byte hole between
->agp_mode and ->aper_base.  We need to clear it to avoid disclosing
stack information to userspace.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

3ca9e5d3

drivers/rtc/rtc-pcf8523.c: fix month definition · 35738392

由 Chris Cui 提交于 5月 06, 2014

PCF8523 uses 1-12 to represent month according to datasheet.
link: www.nxp.com/documents/data_sheet/PCF8523.pdf.
Signed-off-by: NChris Cui <chris.wei.cui@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

35738392

06 5月, 2014 3 次提交

drm/radeon: add Mullins VCE support · 428beddd

由 Leo Liu 提交于 4月 30, 2014

VCE 2.0 just like the other CIK parts.
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

428beddd

drm/radeon: modesetting updates for Mullins. · b214f2a4

由 Samuel Li 提交于 4月 30, 2014

Uses the same code as Kabini.
Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

b214f2a4

drm/radeon: dpm updates for KV/KB · 47f5c746

由 Alex Deucher 提交于 4月 30, 2014

- Use vddc/sclk dep table for voltage if available
- Fix UVD DPM setup
- Patch voltage tables properly for non-UVD blocks
- Fix DPM + UVD/VCE on Mullins
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

47f5c746