Makefiles still had common-spar listed in ccflags.

This gets rid of them.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move last three files out of common-spar

iochannel.h --> include (will be used by visorhba and visornic)
version.h --> moved to include
controlvmcompletionstatus.h --> moved to visorbus, part of
		controlvmchannel.h
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Diagchannel needs to go to standard include.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move vbuschannel.h into visorbus.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Channel.h is used by all channels, it needs to be in include.
Controlvm Channel is only used by visorbus, it needs to just be there.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Controlframework was only needed by controlvmchannel, move the
structures into that header file.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move hypervisor calls into visorbus and move vbusdeviceinfo.h into
visorbus.
Drivers will call into that to update clientInfo field.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

To prep for the moving of include files, temporarily add the
visorbus/ as a ccflags -I.  Once the header files are all
transitioned, we can remove this.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This preps for the possible build breakage in the next few
patches.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
[updated changelog to reflect new patch order; instead
of 'fixes' the patch 'prevents' - dcz]
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Get rid of common-spar/include/diagnostics/appos_subsystems.h.

No one is using it.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to avoid possible memory leak if the ion device registration
get failed.Free the allocated device creation memory before return
in case the ion device registration get failed.
Signed-off-by: NShailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds more help description on android Kconfig for
- lowmemory killer
- Timed gpio (same for timed output)
Signed-off-by: NJagan Teki <jteki@openedev.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch reformat multi-line comments which are not properly written
according to the kernel coding style in cb_pcidas64.c
Signed-off-by: NAmaury Denoyelle <amaury.denoyelle@gmail.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes coding style errors reported by checkpatch.pl for
cb_pcidas64.c, about too long source code lines.
Signed-off-by: NAmaury Denoyelle <amaury.denoyelle@gmail.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a spelling error in a comment.
Signed-off-by: NColin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-v4.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle.

Core functionality
* i and q modifiers from quadrature channels.
* IIO_CHAN_INFO_OVERSAMPLING_RATIO added.
* High pass filter attributes added to mirror the existing low pass filter
  ones.

Core cleanups
* Make IIO tools building more cross compiler friendly.
* Substantial rework of the function __iio_update_buffers to greatly simplify
  a hideously evolved function.

New drivers and support
* ACPI0008 ambient light sensor driver. This one has been around a long time to
  will be good to finally get it into mainline.
* Berlin SOC ADC support.
* BMC150 magnetometer.  The accelerometer in the same package has been supported
  for quite some time, so good to have this half as well.
* m62332 DAC driver
* MEMSIC MMC35420 magnetometer.
* ROHM BH1710 and similar ambient light sensors.
* Sensortek STK3310 light sensor.
* Sensortek STK8312 accelerometer.
* Sensortek STK8BA50 accelerometer.
* ti-adc128s052 gains support form the adc122s021 2 channel ADC.

Driver cleanups and functionality.
* Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled.
* bmc150 - decouple trigger from buffer to allow other triggers to be used.
* bmg160 - decouple trigger from buffer to allow other triggers to be used.
  Fix a trivial unused field.
* Constify a load of platform_device_id structures.
* inv_mpu6050 - device tree bindings.
* hid-sensors - fix a memory leak during probe if certain errors occur.
* ltr501 - illuminance channel derived (in an non obvious fashion) from the
  intensity channels.
* ltr501 - fix a boundary check on the proximity threshold.
* mlx90614 - drop a pointless return.
* mma8452 - Debugfs register access and fix a bug that had no effect (by
  coincidence)
* ti_am335x_adc - add device tree bindings for sample-delay, open-delay and
  averaging.  The ideal settings for these tend to be board design specific.

Minimal implementation of an IIO driver for the Sensortek
STK8BA50 3-axis accelerometer. Datasheet:
http://szgsensor.com/uploads/soft/141229/STK8BA50%D2%E5%BC%CE.pdf

Includes:
- ACPI support;
- read_raw for x,y,z axes;
- reading and setting the scale (range) parameter.
- power management
Signed-off-by: NTiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Currently when something goes wrong at some step when disabling the buffers
we immediately abort. This has the effect that the enable/disable calls are
no longer balanced. So make sure that even if one step in the disable
sequence fails the other steps are still executed.

The other issue is that when either enable or disable fails buffers that
were active at that time stay active while the device itself is disabled.
This leaves things in a inconsistent state and can cause unbalanced
enable/disable calls. Furthermore when enable fails we restore the old scan
mask, but still keeps things disabled.

Given that verification of the configuration was performed earlier and it
is valid at the point where we try to enable/disable the most likely reason
of failure is a communication failure with the device or maybe a
out-of-memory situation. There is not really a good recovery strategy in
such a case, so it makes sense to leave the device disabled, but we should
still leave it in a consistent state.

What the patch does if disable/enable fails is to deactivate all buffers
and make sure that the device will be in the same state as if all buffers
had been manually disabled.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

__iio_update_buffers is already a rather large function with many different
error paths and it is going to get even larger. This patch factors out the
device enable and device disable paths into separate helper functions.

The patch also re-implements iio_disable_all_buffers() using the new
iio_disable_buffers() function removing a fair bit of redundant code.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Currently __iio_update_buffers() verifies whether the new configuration
will work in the middle of the update sequence. This means if the new
configuration is invalid we need to rollback the changes already made. This
patch moves the validation of the new configuration at the beginning of
__iio_update_buffers() and will not start to make any changes if the new
configuration is invalid.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NUrs Fässler <urs.fassler@bytesatwork.ch>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

I/Q modifiers can be used to denote signals which are represented by a
in-phase and a quadrature component.

The ABI documentation describes the I and Q modifiers for current and
voltage channels for now as those will be the most likely users.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Following the addition of a Berlin ADC driver, this patch adds the
corresponding bindings documentation.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds the support of the Berlin ADC, available on Berlin SoCs.
This ADC has 8 channels available, with one connected to a temperature
sensor.

The particularity here, is that the temperature sensor connected to the
ADC has its own registers, and both the ADC and the temperature sensor
must be configured when using it.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We want the fixes in here for testing and merge issues.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Two watchdog changes that came through different trees had a non
conflicting conflict, that is, one changed the semantics of a variable
but no actual code conflict happened. So the merge appeared fine, but
the resulting code did not behave as expected.

Commit 195daf66 ("watchdog: enable the new user interface of the
watchdog mechanism") changes the semantics of watchdog_user_enabled,
which thereafter is only used by the functions introduced by
b3738d29 ("watchdog: Add watchdog enable/disable all functions").

There further appears to be a distinct lack of serialization between
setting and using watchdog_enabled, so perhaps we should wrap the
{en,dis}able_all() things in watchdog_proc_mutex.

This patch fixes a s2r failure reported by Michal; which I cannot
readily explain. But this does make the code internally consistent
again.
Reported-and-tested-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull MTD fixes from Brian Norris:
 "Two MTD fixes for 4.1:

   - readtest: the signal-handling code was clobbering the error codes
     we should be handling/reporting in this test, rendering it useless.
     Noticed by Coverity.

   - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being
     revised, so let's change that before 4.1 is minted"

* tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd:
  Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
  mtd: readtest: don't clobber error reports

Minimal implementation of an IIO driver for the Sensortek
STK8312 3-axis accelerometer. Datasheet:
http://www.syi-group.com/uploadpic/data/201361817562681623.pdf

Includes:
- ACPI support;
- read_raw for x,y,z axes;
- reading and setting the scale (range) parameter.
- power management
Signed-off-by: NTiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

If the interrupt pins are not available, we should still be able to use
the buffer with an external trigger.  However, we won't be able to use
the hardware fifo since we have no means of signalling when the
watermark is reached.

I also added a comment to indicate that the timestamps in
bmc150_accel_data are only used for hardware fifo, since initially I was
confused about duplication with pf->timestamp.
Signed-off-by: NVlad Dogaru <vlad.dogaru@intel.com>
Reviewed-by: NOctavian Purdila <octavian.purdila@intel.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add a high pass filter attribute for measurements
(like the existing low pass)

Also add both high and low pass attributes for events.
Signed-off-by: NMartin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NMartin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Many of the hardware configuration registers may only be modified while the
device is inactive.

Currently the probe code first activates the device and then modifies the
registers (eg to set the scale). This doesn't actually work but is not
noticed since the scale used is the default value.

While at it also issue a hardware reset command at probe time.
Signed-off-by: NMartin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Make it possible to use buffering with an external trigger, such as one
based on sysfs or hrtimer.
Signed-off-by: NVlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Replace the 'timestamp' field in struct bmg160_data with the identically
named field in iio_poll_func and with calls to iio_get_time_ns().

The reported timestamps may be slightly different, but the advantage is
that we no longer assume that the buffer of bmg160 is triggered by its
own trigger.
Signed-off-by: NVlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We only have to call the request_update() callback for a newly inserted
buffer. The configuration of the already previously active buffers will not
have changed.

This also allows us to move the request_update() call to the beginning of
__iio_update_buffers(), before any currently active buffers are stopped.
This makes the error handling a lot easier since no changes were made to
the buffer list and no rollback needs to be performed.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>