The programming of periodic tick devices needs to be saved/restored
across suspend/resume - otherwise we might end up with a system coming
up that relies on getting a PIT (or HPET) interrupt, while those devices
default to 'no interrupts' after powerup. (To confuse things it worked
to a certain degree on some systems because the lapic gets initialized
as a side-effect of SMP bootup.)

This suspend / resume thing was dropped unintentionally during the
last-minute -mm code reshuffling.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

add /proc/timer_list, which prints all currently pending (high-res) timers,
all clock-event sources and their parameters in a human-readable form.

Sample output:

Timer List Version: v0.1
HRTIMER_MAX_CLOCK_BASES: 2
now at 4246046273872 nsecs

cpu: 0
 clock 0:
  .index:      0
  .resolution: 1 nsecs
  .get_time:   ktime_get_real
  .offset:     1273998312645738432 nsecs
active timers:
 clock 1:
  .index:      1
  .resolution: 1 nsecs
  .get_time:   ktime_get
  .offset:     0 nsecs
active timers:
 #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_stop_sched_tick, swapper/0
 # expires at 4246432689566 nsecs [in 386415694 nsecs]
 #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, pcscd/2050
 # expires at 4247018194689 nsecs [in 971920817 nsecs]
 #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, irqbalance/1909
 # expires at 4247351358392 nsecs [in 1305084520 nsecs]
 #3: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, crond/2157
 # expires at 4249097614968 nsecs [in 3051341096 nsecs]
 #4: <f5a90ec8>, it_real_fn, do_setitimer, syslogd/1888
 # expires at 4251329900926 nsecs [in 5283627054 nsecs]
  .expires_next   : 4246432689566 nsecs
  .hres_active    : 1
  .check_clocks   : 0
  .nr_events      : 31306
  .idle_tick      : 4246020791890 nsecs
  .tick_stopped   : 1
  .idle_jiffies   : 986504
  .idle_calls     : 40700
  .idle_sleeps    : 36014
  .idle_entrytime : 4246019418883 nsecs
  .idle_sleeptime : 4178181972709 nsecs

cpu: 1
 clock 0:
  .index:      0
  .resolution: 1 nsecs
  .get_time:   ktime_get_real
  .offset:     1273998312645738432 nsecs
active timers:
 clock 1:
  .index:      1
  .resolution: 1 nsecs
  .get_time:   ktime_get
  .offset:     0 nsecs
active timers:
 #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_restart_sched_tick, swapper/0
 # expires at 4246050084568 nsecs [in 3810696 nsecs]
 #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, atd/2227
 # expires at 4261010635003 nsecs [in 14964361131 nsecs]
 #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, smartd/2332
 # expires at 5469485798970 nsecs [in 1223439525098 nsecs]
  .expires_next   : 4246050084568 nsecs
  .hres_active    : 1
  .check_clocks   : 0
  .nr_events      : 24043
  .idle_tick      : 4246046084568 nsecs
  .tick_stopped   : 0
  .idle_jiffies   : 986510
  .idle_calls     : 26360
  .idle_sleeps    : 22551
  .idle_entrytime : 4246043874339 nsecs
  .idle_sleeptime : 4170763761184 nsecs

tick_broadcast_mask: 00000003
event_broadcast_mask: 00000001

CPU#0's local event device:

Clock Event Device: lapic
 capabilities:   0000000e
 max_delta_ns:   807385544
 min_delta_ns:   1443
 mult:           44624025
 shift:          32
 set_next_event: lapic_next_event
 set_mode:       lapic_timer_setup
 event_handler:  hrtimer_interrupt
  .installed:  1
  .expires:    4246432689566 nsecs

CPU#1's local event device:

Clock Event Device: lapic
 capabilities:   0000000e
 max_delta_ns:   807385544
 min_delta_ns:   1443
 mult:           44624025
 shift:          32
 set_next_event: lapic_next_event
 set_mode:       lapic_timer_setup
 event_handler:  hrtimer_interrupt
  .installed:  1
  .expires:    4246050084568 nsecs

Clock Event Device: hpet
 capabilities:   00000007
 max_delta_ns:   2147483647
 min_delta_ns:   3352
 mult:           61496110
 shift:          32
 set_next_event: hpet_next_event
 set_mode:       hpet_set_mode
 event_handler:  handle_nextevt_broadcast
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With Ingo Molnar <mingo@elte.hu>

Add functions to provide dynamic ticks and high resolution timers.  The code
which keeps track of jiffies and handles the long idle periods is shared
between tick based and high resolution timer based dynticks.  The dyntick
functionality can be disabled on the kernel commandline.  Provide also the
infrastructure to support high resolution timers.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With Ingo Molnar <mingo@elte.hu>

Add broadcast functionality, so per cpu clock event devices can be registered
as dummy devices or switched from/to broadcast on demand.  The broadcast
function distributes the events via the broadcast function of the clock event
device.  This is primarily designed to replace the switch apic timer to / from
IPI in power states, where the apic stops.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>