- 26 11月, 2015 2 次提交
-
-
由 Andrey Smetanin 提交于
The function to determine if the vector is handled by ioapic used to rely on the fact that only ioapic-handled vectors were set up to cause vmexits when virtual apic was in use. We're going to break this assumption when introducing Hyper-V synthetic interrupts: they may need to cause vmexits too. To achieve that, introduce a new bitmap dedicated specifically for ioapic-handled vectors, and populate EOI exit bitmap from it for now. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Actually kvm_arch_irq_routing_update() should be kvm_arch_post_irq_routing_update() as it's called at the end of irq routing update. This renaming frees kvm_arch_irq_routing_update function name. kvm_arch_irq_routing_update() weak function which will be used to update mappings for arch-specific irq routing entries (in particular, the upcoming Hyper-V synthetic interrupts). Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 25 11月, 2015 7 次提交
-
-
由 Haozhong Zhang 提交于
This patch removes the vpid check when emulating nested invvpid instruction of type all-contexts invalidation. The existing code is incorrect because: (1) According to Intel SDM Vol 3, Section "INVVPID - Invalidate Translations Based on VPID", invvpid instruction does not check vpid in the invvpid descriptor when its type is all-contexts invalidation. (2) According to the same document, invvpid of type all-contexts invalidation does not require there is an active VMCS, so/and get_vmcs12() in the existing code may result in a NULL-pointer dereference. In practice, it can crash both KVM itself and L1 hypervisors that use invvpid (e.g. Xen). Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Mark Rutland 提交于
If we call __kvm_hyp_panic while a guest context is active, we call __restore_sysregs before acquiring the system register values for the panic, in the process throwing away the PAR_EL1 value at the point of the panic. This patch modifies __kvm_hyp_panic to stash the PAR_EL1 value prior to restoring host register values, enabling us to report the original values at the point of the panic. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Mark Rutland 提交于
Currently __kvm_hyp_panic uses %p for values which are not pointers, such as the ESR value. This can confusingly lead to "(null)" being printed for the value. Use %x instead, and only use %p for host pointers. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Christoffer Dall 提交于
We were setting the physical active state on the GIC distributor in a preemptible section, which could cause us to set the active state on different physical CPU from the one we were actually going to run on, hacoc ensues. Since we are no longer descheduling/scheduling soft timers in the flush/sync timer functions, simply moving the timer flush into a non-preemptible section. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
Cortex-A57 parts up to r1p2 can misreport Stage 2 translation faults when a Stage 1 permission fault or device alignment fault should have been reported. This patch implements the workaround (which is to validate that the Stage-1 translation actually succeeds) by using code patching. Cc: stable@vger.kernel.org Reviewed-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
When running a 32bit guest under a 64bit hypervisor, the ARMv8 architecture defines a mapping of the 32bit registers in the 64bit space. This includes banked registers that are being demultiplexed over the 64bit ones. On exceptions caused by an operation involving a 32bit register, the HW exposes the register number in the ESR_EL2 register. It was so far understood that SW had to distinguish between AArch32 and AArch64 accesses (based on the current AArch32 mode and register number). It turns out that I misinterpreted the ARM ARM, and the clue is in D1.20.1: "For some exceptions, the exception syndrome given in the ESR_ELx identifies one or more register numbers from the issued instruction that generated the exception. Where the exception is taken from an Exception level using AArch32 these register numbers give the AArch64 view of the register." Which means that the HW is already giving us the translated version, and that we shouldn't try to interpret it at all (for example, doing an MMIO operation from the IRQ mode using the LR register leads to very unexpected behaviours). The fix is thus not to perform a call to vcpu_reg32() at all from vcpu_reg(), and use whatever register number is supplied directly. The only case we need to find out about the mapping is when we actively generate a register access, which only occurs when injecting a fault in a guest. Cc: stable@vger.kernel.org Reviewed-by: NRobin Murphy <robin.murphy@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Ard Biesheuvel 提交于
The open coded tests for checking whether a PTE maps a page as uncached use a flawed '(pte_val(xxx) & CONST) != CONST' pattern, which is not guaranteed to work since the type of a mapping is not a set of mutually exclusive bits For HYP mappings, the type is an index into the MAIR table (i.e, the index itself does not contain any information whatsoever about the type of the mapping), and for stage-2 mappings it is a bit field where normal memory and device types are defined as follows: #define MT_S2_NORMAL 0xf #define MT_S2_DEVICE_nGnRE 0x1 I.e., masking *and* comparing with the latter matches on the former, and we have been getting lucky merely because the S2 device mappings also have the PTE_UXN bit set, or we would misidentify memory mappings as device mappings. Since the unmap_range() code path (which contains one instance of the flawed test) is used both for HYP mappings and stage-2 mappings, and considering the difference between the two, it is non-trivial to fix this by rewriting the tests in place, as it would involve passing down the type of mapping through all the functions. However, since HYP mappings and stage-2 mappings both deal with host physical addresses, we can simply check whether the mapping is backed by memory that is managed by the host kernel, and only perform the D-cache maintenance if this is the case. Cc: stable@vger.kernel.org Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: NPavel Fedin <p.fedin@samsung.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 22 11月, 2015 7 次提交
-
-
由 Helge Deller 提交于
Adjust the linker script and map_pages() to map kernel text and data on physical 1MB huge/large pages. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
This patch adds huge page support to allow userspace to allocate huge pages and to use hugetlbfs filesystem on 32- and 64-bit Linux kernels. A later patch will add kernel support to map kernel text and data on huge pages. The only requirement is, that the kernel needs to be compiled for a PA8X00 CPU (PA2.0 architecture). Older PA1.X CPUs do not support variable page sizes. 64bit Kernels are compiled for PA2.0 by default. Technically on parisc multiple physical huge pages may be needed to emulate standard 2MB huge pages. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Use the 22bit instead of the 17bit branch instruction on a 64bit kernel to reach the do_syscall_trace_exit function from the gateway page. A huge page enabled kernel may need the additional branch distance bits. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
For the 64bit kernel the initially 16 MB kernel memory might become too small if you build a kernel with many modules built-in and with kernel text and data areas mapped on huge pages. This patch increases the initial mapping to 32MB for 64bit kernels and keeps 16MB for 32bit kernels. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
A fault vector on parisc needs to be 2K aligned. Furthermore the checksum of the fault vector needs to sum up to 0 which is being calculated and written at runtime. Up to now we aligned both PA20 and PA11 fault vectors on the same 4K page in order to easily write the checksum after having mapped the kernel read-only (by mapping this page only as read-write). But when we want to map the kernel text and data on huge pages this makes things harder. So, simplify it by aligning both fault vectors on 2K boundries and write the checksum before we map the page read-only. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Huge pages on parisc will have the same size as one pmd table, which is on a 64bit kernel 2MB on a kernel with 4K kernel page sizes, and on a 32bit kernel 4MB when used with 4K kernel pages. Since parisc does not physically supports 2MB huge page sizes, emulate it with two consecutive 1MB page sizes instead. Keeping the same huge page size as one pmd will allow us to add transparent huge page support later on. Bit 21 in the pte flags was unused and will now be used to mark a page as huge page (_PAGE_HPAGE_BIT). Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Drop the MADV_xxK_PAGES flags, which were never used and were from a proposed API which was never integrated into the generic Linux kernel code. Cc: stable@vger.kernel.org Signed-off-by: NHelge Deller <deller@gmx.de>
-
- 20 11月, 2015 6 次提交
-
-
由 Alban Bedel 提交于
As I'm using a board with a broken old bootloader I hardcoded the mips_machtype and did't notice that the machine entry was still missing. [ralf@linux-mips.org: Fixed spelling message noticed by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>.] Signed-off-by: NAlban Bedel <albeu@free.fr> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11503/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alban Bedel 提交于
There is 2 registers that is 8 bytes long, not 4. Signed-off-by: NAlban Bedel <albeu@free.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alexander Couzens <lynxis@fe80.eu> Cc: Joel Porquet <joel@porquet.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11508/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alban Bedel 提交于
The DDR control initialization needs to know the SoC type, however ath79_detect_sys_type() was called after ath79_ddr_ctrl_init(). Reverse the order to fix the DDR control initialization on ar71xx and ar934x. Signed-off-by: NAlban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> CC: stable@vger.kernel.org # v4.2+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11500/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Helge Deller 提交于
The definition of start_thread_som was planned to be used to execute HP-UX SOM binaries. Since HP-UX compatibility was dropped with kernel 4.0 there is no need to carry it further. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
The first pmd entry is marked with PxD_FLAG_ATTACHED instead of _PAGE_GATEWAY. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Yang Shi 提交于
As previously reported, some userspace applications depend on bogomips showed by /proc/cpuinfo. Although there is much less legacy impact on aarch64 than arm, it does break libvirt. This patch reverts commit 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo"), but with some tweak due to context change and without the pr_info(). Fixes: 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo") Signed-off-by: NYang Shi <yang.shi@linaro.org> Acked-by: NWill Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 3.12+ Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 19 11月, 2015 7 次提交
-
-
由 David Hildenbrand 提交于
For now, VCPUs were always created sequentially with incrementing VCPU ids. Therefore, the index in the VCPUs array matched the id. As sequential creation might change with cpu hotplug, let's use the correct lookup function to find a VCPU by id, not array index. Let's also use kvm_lookup_vcpu() for validation of the sending VCPU on external call injection. Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org # db27a7a3 KVM: Provide function for VCPU lookup by id
-
由 David Hildenbrand 提交于
Commit 383d0b05 ("KVM: s390: handle pending local interrupts via bitmap") introduced a possible memory overwrite from user space. User space could pass an invalid emergency signal code (sending VCPU) and therefore exceed the bitmap. Let's take care of this case and check that the id is in the valid range. Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v3.19+ db27a7a3 KVM: Provide function for VCPU lookup by id Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
The pfmf intercept handler should check if the EDAT 1 facility is installed in the guest, not if it is installed in the host. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
We should never allow to enable/disable any facilities for the guest when other VCPUs were already created. kvm_arch_vcpu_(load|put) relies on SIMD not changing during runtime. If somebody would create and run VCPUs and then decides to enable SIMD, undefined behaviour could be possible (e.g. vector save area not being set up). Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org # 4.1+
-
由 Andrew Cooper 提交于
There appears to be no formal statement of what pv_irq_ops.save_fl() is supposed to return precisely. Native returns the full flags, while lguest and Xen only return the Interrupt Flag, and both have comments by the implementations stating that only the Interrupt Flag is looked at. This may have been true when initially implemented, but no longer is. To make matters worse, the Xen PVOP leaves the upper bits undefined, making the BUG_ON() undefined behaviour. Experimentally, this now trips for 32bit PV guests on Broadwell hardware. The BUG_ON() is consistent for an individual build, but not consistent for all builds. It has also been a sitting timebomb since SMAP support was introduced. Use native_save_fl() instead, which will obtain an accurate view of the AC flag. Signed-off-by: NAndrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Tested-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <lguest@lists.ozlabs.org> Cc: Xen-devel <xen-devel@lists.xen.org> CC: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1433323874-6927-1-git-send-email-andrew.cooper3@citrix.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Namhyung Kim 提交于
There was a confusion between update_ftrace_function() and static function tracing trampoline regarding 3rd parameter (ftrace_ops). Add a comment for clarification. Suggested-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1447721004-2551-1-git-send-email-namhyung@kernel.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Will Deacon 提交于
A newly introduced function in include/net/sock.h passes a const argument to smp_load_acquire: static inline int sk_state_load(const struct sock *sk) { return smp_load_acquire(&sk->sk_state); } This cause an allmodconfig build failure, since our underlying load-acquire implementation does not handle const types correctly: include/net/sock.h: In function 'sk_state_load': ./arch/arm64/include/asm/barrier.h:71:3: error: read-only variable '___p1' used as 'asm' output asm volatile ("ldarb %w0, %1" \ This patch fixes the problem by reusing the trick in READ_ONCE that loads via a non-const member of an anonymous union. This has the advantage of allowing us to use smp_load_acquire on packed structures (e.g. arch_spinlock_t) as well as primitive types. Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Daney <david.daney@cavium.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: NArnd Bergmann <arnd@arndb.de> Reported-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 18 11月, 2015 11 次提交
-
-
由 Laura Abbott 提交于
The permissions in mark_rodata_ro trigger a build error with STRICT_MM_TYPECHECKS. Fix this by introducing PAGE_KERNEL_ROX for the same reasons as PAGE_KERNEL_RO. From Ard: "PAGE_KERNEL_EXEC has PTE_WRITE set as well, making the range writeable under the ARMv8.1 DBM feature, that manages the dirty bit in hardware (writing to a page with the PTE_RDONLY and PTE_WRITE bits both set will clear the PTE_RDONLY bit in that case)" Signed-off-by: NLaura Abbott <labbott@fedoraproject.org> Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Ard Biesheuvel 提交于
The asynchronous, merged implementations of AES in CBC, CTR and XTS modes are preferred when available (i.e., when instantiating ablkciphers explicitly). However, the synchronous core AES cipher combined with the generic CBC mode implementation will produce a 'cbc(aes)' blkcipher that is callable asynchronously as well. To prevent this implementation from being used when the accelerated asynchronous implemenation is also available, lower its priority to 250 (i.e., below the asynchronous module's priority of 300). Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Matt Gingell 提交于
Before this patch, we incorrectly enter the guest without requesting an interrupt window if the IRQ chip is split between user space and the kernel. Because lapic_in_kernel no longer implies the PIC is in the kernel, this patch tests pic_in_kernel to determining whether an interrupt window should be requested when entering the guest. If the APIC is in the kernel and we request an interrupt window the guest will return immediately. If the APIC is masked the guest will not not make forward progress and unmask it, leading to a loop when KVM reenters and requests again. This patch adds a check to ensure the APIC is ready to accept an interrupt before requesting a window. Reviewed-by: NSteve Rutherford <srutherford@google.com> Signed-off-by: NMatt Gingell <gingell@google.com> [Use the other newly introduced functions. - Paolo] Fixes: 1c1a9ce9 Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Matt Gingell 提交于
Set KVM_REQ_EVENT when a PIC in user space injects a local interrupt. Currently a request is only made when neither the PIC nor the APIC is in the kernel, which is not sufficient in the split IRQ chip case. This addresses a problem in QEMU where interrupts are delayed until another path invokes the event loop. Reviewed-by: NSteve Rutherford <srutherford@google.com> Signed-off-by: NMatt Gingell <gingell@google.com> Fixes: 1c1a9ce9 Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Matt Gingell 提交于
This patch breaks out a new function kvm_vcpu_ready_for_interrupt_injection. This routine encapsulates the logic required to determine whether a vcpu is ready to accept an interrupt injection, which is now required on multiple paths. Reviewed-by: NSteve Rutherford <srutherford@google.com> Signed-off-by: NMatt Gingell <gingell@google.com> Fixes: 1c1a9ce9 Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Matt Gingell 提交于
This patch ensures that dm_request_for_irq_injection and post_kvm_run_save are in sync, avoiding that an endless ping-pong between userspace (who correctly notices that IF=0) and the kernel (who insists that userspace handles its request for the interrupt window). To synchronize them, it also adds checks for kvm_arch_interrupt_allowed and !kvm_event_needs_reinjection. These are always needed, not just for in-kernel LAPIC. Signed-off-by: NMatt Gingell <gingell@google.com> [A collage of two patches from Matt. - Paolo] Fixes: 1c1a9ce9 Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 James Hogan 提交于
If either of the memory allocations in kvm_arch_vcpu_create() fail, the vcpu which has been allocated and kvm_vcpu_init'd doesn't get uninit'd in the error handling path. Add a call to kvm_vcpu_uninit() to fix this. Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 James Hogan 提交于
The immediate field of the CACHE instruction is signed, so ensure that it gets sign extended by casting it to an int16_t rather than just masking the low 16 bits. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 James Hogan 提交于
ASID restoration on guest resume should determine the guest execution mode based on the guest Status register rather than bit 30 of the guest PC. Fix the two places in locore.S that do this, loading the guest status from the cop0 area. Note, this assembly is specific to the trap & emulate implementation of KVM, so it doesn't need to check the supervisor bit as that mode is not implemented in the guest. Fixes: b680f70f ("KVM/MIPS32: Entry point for trampolining to...") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Ard Biesheuvel 提交于
As pointed out by Russell King in response to the proposed ARM version of this code, the sequence to switch between the UEFI runtime mapping and current's actual userland mapping (and vice versa) is potentially unsafe, since it leaves a time window between the switch to the new page tables and the TLB flush where speculative accesses may hit on stale global TLB entries. So instead, use non-global mappings, and perform the switch via the ordinary ASID-aware context switch routines. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: NWill Deacon <will.deacon@arm.com> Reviewed-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Peter Chen 提交于
For imx27, it needs three clocks to let the controller work, the old code is wrong, and usbmisc has not included clock handling code any more. Without this patch, it will cause below data abort when accessing usbmisc registers. usbcore: registered new interface driver usb-storage Unhandled fault: external abort on non-linefetch (0x008) at 0xf4424600 pgd = c0004000 [f4424600] *pgd=10000452(bad) Internal error: : 8 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-next-20150701-dirty #3089 Hardware name: Freescale i.MX27 (Device Tree Support) task: c7832b60 ti: c783e000 task.ti: c783e000 PC is at usbmisc_imx27_init+0x4c/0xbc LR is at usbmisc_imx27_init+0x40/0xbc pc : [<c03cb5c0>] lr : [<c03cb5b4>] psr: 60000093 sp : c783fe08 ip : 00000000 fp : 00000000 r10: c0576434 r9 : 0000009c r8 : c7a773a0 r7 : 01000000 r6 : 60000013 r5 : c7a776f0 r4 : c7a773f0 r3 : f4424600 r2 : 00000000 r1 : 00000001 r0 : 00000001 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0005317f Table: a0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc783e190) Stack: (0xc783fe08 to 0xc7840000) Signed-off-by: NPeter Chen <peter.chen@freescale.com> Reported-by: NFabio Estevam <fabio.estevam@freescale.com> Tested-by: NFabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> #v4.1+ Acked-by: NShawn Guo <shawnguo@kernel.org>
-