Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 7月, 2009 10 次提交
  3. 14 7月, 2009 12 次提交
  5. 13 7月, 2009 18 次提交
    • T
      ext4: Fix ext4_mb_initialize_context() to initialize all fields · 833576b3
      由 Theodore Ts'o 提交于 
      Pavel Roskin pointed out that kmemcheck indicated that
ext4_mb_store_history() was accessing uninitialized values of
ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc
history.  Fix this by initializing the entire structure to all zeros
first.

Also, two fields were getting doubly initialized by the caller of
ext4_mb_initialize_context, so remove them for efficiency's sake.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      833576b3
    • P
      ext4: fix null handler of ioctls in no journal mode · ac046f1d
      由 Peng Tao 提交于 
      The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not
flush the journal in no_journal mode.  Otherwise, running resize2fs on
a mounted no_journal partition triggers the following error messages:

BUG: unable to handle kernel NULL pointer dereference at 00000014
IP: [<c039d282>] _spin_lock+0x8/0x19
*pde = 00000000 
Oops: 0002 [#1] SMP
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      ac046f1d
    • C
      ext4: Fix buffer head reference leak in no-journal mode · e6b5d301
      由 Curt Wohlgemuth 提交于 
      We found a problem with buffer head reference leaks when using an ext4
partition without a journal.  In particular, calls to ext4_forget() would
not to a brelse() on the input buffer head, which will cause pages they
belong to to not be reclaimable.

Further investigation showed that all places where ext4_journal_forget() and
ext4_journal_revoke() are called are subject to the same problem.  The patch
below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit
release of the buffer head when the journal handle isn't valid.
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      e6b5d301
    • R
      x86, apic: Fix false positive section mismatch in numaq_32.c · 7473727b
      由 Rakib Mullick 提交于 
      The variable apic_numaq placed in noninit section references the
function wakeup_secondary_cpu_via_nmi(), which is in __cpuinit
section. Thus causes a section mismatch warning. To avoid such
mismatch we mark apic_numaq as __refdata.

We were warned by the following warning:

  WARNING: arch/x86/kernel/built-in.o(.data+0x932c): Section mismatch in
  reference from the variable apic_numaq to the function
  .cpuinit.text:wakeup_secondary_cpu_via_nmi()
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
LKML-Reference: <b9df5fa10907120407p6b4f67dtf4d563155488188a@mail.gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7473727b
    • R
      x86: Fix false positive section mismatch in es7000_32.c · 151586d0
      由 Rakib Mullick 提交于 
      The variable apic_es7000_cluster references the function __cpuinit
wakeup_secondary_cpu_via_mip() from a noninit section. So we've been
warned by the following warning. To avoid possible collision between
init/noninit, its best to mark the variable as __refdata.

We were warned by the following warning:

  LD      arch/x86/kernel/apic/built-in.o
  WARNING: arch/x86/kernel/apic/built-in.o(.data+0x198c): Section
  mismatch in reference from the variable apic_es7000_cluster to the
  function .cpuinit.text:wakeup_secondary_cpu_via_mip()
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
LKML-Reference: <b9df5fa10907120404k6279a10ch5e9682432272706f@mail.gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      151586d0
    • S
      tracing/function-profiler: do not free per cpu variable stat · 6ab5d668
      由 Steven Rostedt 提交于 
      The per cpu variable stat is freeded if we fail to allocate a name
on start up. This was due to stat at first being allocated in the
initial design. But since then, it has become a static per cpu variable
but the free on error was not removed.

Also added __init annotation to the function that this is in.

[ Impact: prevent possible memory corruption on low mem at boot up ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6ab5d668
    • L
      tracing/events: Move TRACE_SYSTEM outside of include guard · d0b6e04a
      由 Li Zefan 提交于 
      If TRACE_INCLDUE_FILE is defined, <trace/events/TRACE_INCLUDE_FILE.h>
will be included and compiled, otherwise it will be
<trace/events/TRACE_SYSTEM.h>

So TRACE_SYSTEM should be defined outside of #if proctection,
just like TRACE_INCLUDE_FILE.

Imaging this scenario:

 #include <trace/events/foo.h>
    -> TRACE_SYSTEM == foo
 ...
 #include <trace/events/bar.h>
    -> TRACE_SYSTEM == bar
 ...
 #define CREATE_TRACE_POINTS
 #include <trace/events/foo.h>
    -> TRACE_SYSTEM == bar !!!

and then bar.h will be included and compiled.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A5A9CF1.2010007@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d0b6e04a
    • R
      NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines. · adeab1af
      由 Ralf Baechle 提交于 
      Guido Trentalancia reports:

I am trying to use the kiss driver in the Linux kernel that is being
shipped with Fedora 10 but unfortunately I get the following oops:

mkiss: AX.25 Multikiss, Hans Albas PE1AYX
mkiss: ax0: crc mode is auto.
ADDRCONF(NETDEV_CHANGE): ax0: link becomes ready
------------[ cut here ]------------
WARNING: at kernel/softirq.c:77 __local_bh_disable+0x2f/0x83() (Not
tainted)
[...]
unloaded: microcode]
Pid: 0, comm: swapper Not tainted 2.6.27.25-170.2.72.fc10.i686 #1
 [<c042ddfb>] warn_on_slowpath+0x65/0x8b
 [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38
 [<c04228b4>] ? __enqueue_entity+0xe3/0xeb
 [<c042431e>] ? enqueue_entity+0x203/0x20b
 [<c0424361>] ? enqueue_task_fair+0x3b/0x3f
 [<c041f88c>] ? resched_task+0x3a/0x6e
 [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38
 [<c06ab4e2>] ? _spin_lock_bh+0xb/0x16
 [<c043255b>] __local_bh_disable+0x2f/0x83
 [<c04325ba>] local_bh_disable+0xb/0xd
 [<c06ab4e2>] _spin_lock_bh+0xb/0x16
 [<f8b6f600>] mkiss_receive_buf+0x2fb/0x3a6 [mkiss]
 [<c0572a30>] flush_to_ldisc+0xf7/0x198
 [<c0572b12>] tty_flip_buffer_push+0x41/0x51
 [<f89477f2>] ftdi_process_read+0x375/0x4ad [ftdi_sio]
 [<f8947a5a>] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio]
 [<c05d4bec>] usb_hcd_giveback_urb+0x63/0x93
 [<c05ea290>] uhci_giveback_urb+0xe5/0x15f
 [<c05eaabf>] uhci_scan_schedule+0x52e/0x767
 [<c05f6288>] ? psmouse_handle_byte+0xc/0xe5
 [<c054df78>] ? acpi_ev_gpe_detect+0xd6/0xe1
 [<c05ec5b0>] uhci_irq+0x110/0x125
 [<c05d4834>] usb_hcd_irq+0x40/0xa3
 [<c0465313>] handle_IRQ_event+0x2f/0x64
 [<c046642b>] handle_level_irq+0x74/0xbe
 [<c04663b7>] ? handle_level_irq+0x0/0xbe
 [<c0406e6e>] do_IRQ+0xc7/0xfe
 [<c0405668>] common_interrupt+0x28/0x30
 [<c056821a>] ? acpi_idle_enter_simple+0x162/0x19d
 [<c0617f52>] cpuidle_idle_call+0x60/0x92
 [<c0403c61>] cpu_idle+0x101/0x134
 [<c069b1ba>] rest_init+0x4e/0x50
 =======================
---[ end trace b7cc8076093467ad ]---
------------[ cut here ]------------
WARNING: at kernel/softirq.c:136 _local_bh_enable_ip+0x3d/0xc4()
[...]
Pid: 0, comm: swapper Tainted: G        W 2.6.27.25-170.2.72.fc10.i686
 [<c042ddfb>] warn_on_slowpath+0x65/0x8b
 [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38
 [<c04228b4>] ? __enqueue_entity+0xe3/0xeb
 [<c042431e>] ? enqueue_entity+0x203/0x20b
 [<c0424361>] ? enqueue_task_fair+0x3b/0x3f
 [<c041f88c>] ? resched_task+0x3a/0x6e
 [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38
 [<c06ab4e2>] ? _spin_lock_bh+0xb/0x16
 [<f8b6f642>] ? mkiss_receive_buf+0x33d/0x3a6 [mkiss]
 [<c04325f9>] _local_bh_enable_ip+0x3d/0xc4
 [<c0432688>] local_bh_enable_ip+0x8/0xa
 [<c06ab54d>] _spin_unlock_bh+0x11/0x13
 [<f8b6f642>] mkiss_receive_buf+0x33d/0x3a6 [mkiss]
 [<c0572a30>] flush_to_ldisc+0xf7/0x198
 [<c0572b12>] tty_flip_buffer_push+0x41/0x51
 [<f89477f2>] ftdi_process_read+0x375/0x4ad [ftdi_sio]
 [<f8947a5a>] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio]
 [<c05d4bec>] usb_hcd_giveback_urb+0x63/0x93
 [<c05ea290>] uhci_giveback_urb+0xe5/0x15f
 [<c05eaabf>] uhci_scan_schedule+0x52e/0x767
 [<c05f6288>] ? psmouse_handle_byte+0xc/0xe5
 [<c054df78>] ? acpi_ev_gpe_detect+0xd6/0xe1
 [<c05ec5b0>] uhci_irq+0x110/0x125
 [<c05d4834>] usb_hcd_irq+0x40/0xa3
 [<c0465313>] handle_IRQ_event+0x2f/0x64
 [<c046642b>] handle_level_irq+0x74/0xbe
 [<c04663b7>] ? handle_level_irq+0x0/0xbe
 [<c0406e6e>] do_IRQ+0xc7/0xfe
 [<c0405668>] common_interrupt+0x28/0x30
 [<c056821a>] ? acpi_idle_enter_simple+0x162/0x19d
 [<c0617f52>] cpuidle_idle_call+0x60/0x92
 [<c0403c61>] cpu_idle+0x101/0x134
 [<c069b1ba>] rest_init+0x4e/0x50
 =======================
---[ end trace b7cc8076093467ad ]---
mkiss: ax0: Trying crc-smack
mkiss: ax0: Trying crc-flexnet

The issue was, that the locking code in mkiss was assuming it was only
ever being called in process or bh context.  Fixed by converting the
involved locking code to use irq-safe locks.

Review of other networking line disciplines shows that 6pack, both sync
and async PPP and STRIP have similar issues.  The ppp_async one is the
most interesting one as it sorts out half of the issue as far back as
2004 in commit http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=2996d8deaeddd01820691a872550dc0cfba0c37dSigned-off-by: NRalf Baechle <ralf@linux-mips.org>
Reported-by: NGuido Trentalancia <guido@trentalancia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      adeab1af
    • A
      USB: otg: fix module reinsert issue · dc7520c1
      由 Ajay Kumar Gupta 提交于 
      Platform_device instance (pd) is not set to NULL in
usb_nop_xceiv_unregister() causing usb_nop_xceiv_register()
to fail during module reinsert.

From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NBabu Ravi <ravibabu@ti.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
      dc7520c1
    • A
      USB: handle zero-length usbfs submissions correctly · 9180135b
      由 Alan Stern 提交于 
      This patch (as1262) fixes a bug in usbfs: It refuses to accept
zero-length transfers, and it insists that the buffer pointer be valid
even if there is no data being transferred.

The patch also consolidates a bunch of repetitive access_ok() checks
into a single check, which incidentally fixes the lack of such a check
for Isochronous URBs.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      9180135b
    • A
      USB: EHCI: report actual_length for iso transfers · ec6d67e3
      由 Alan Stern 提交于 
      This patch (as1259b) makes ehci-hcd return the total number of bytes
transferred in urb->actual_length for Isochronous transfers.
Until now, the actual_length value was unaccountably left at 0.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      ec6d67e3
    • A
      USB: option: remove unnecessary and erroneous code · f092c240
      由 Alan Stern 提交于 
      This patch (as1264) removes a bunch of unnecessary and erroneous stuff
from the option USB-serial driver.  Clearly there's no need to verify
that the device pointer stored in the URBs is right or to store the
same pointer over again.  After all, the pointer can't change once it
has been set up.

There's also no need to call usb_clear_halt for the IN endpoint
multiple times -- in fact, doing so is an error since every time after
the first there will be active URBs queued for that endpoint.  Since
the Clear-Halts don't appear to be needed at all, the patch simply
removes them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      f092c240
    • A
      USB: cypress_m8: remove invalid Clear-Halt · 4d2fae8b
      由 Alan Stern 提交于 
      This patch (as1265) removes an erroneous call to usb_clear_halt from
the cypress_m8 driver.  The call isn't valid because it is made from
interrupt context whereas usb_clear_halt is a blocking routine.

Presumably the code has never been executed; if it did it would cause
an oops.  So instead treat -EPIPE like any other sort of unexplained
error.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      4d2fae8b
    • S
      USB: musb_host: undo incorrect change in musb_advance_schedule() · 1fe975f9
      由 Sergei Shtylyov 提交于 
      Commit c9cd06b3 (musb_host: refactor
URB giveback) included due to my overlook the change incorrect in the
context of the current kernel -- undo it.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      1fe975f9
    • D
      USB: fix LANGID=0 regression · 0cce2eda
      由 Daniel Mack 提交于 
      commit b7af0bb2 ("USB: allow malformed LANGID descriptors") broke support
for devices without string descriptor support.

Reporting string descriptors is optional to USB devices, and a device
lets us know it can't deal with strings by responding to the LANGID
request with a STALL token.

The kernel handled that correctly before b7af0bb2 came in, but failed
hard if the LANGID was reported but broken. More than that, if a device
was not able to provide string descriptors, the LANGID was retrieved
over and over again at each string read request.

This patch changes the behaviour so that

 a) the LANGID is only queried once
 b) devices which can't handle string requests are not asked again
 c) devices with malformed LANGID values have a sane fallback to 0x0409
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      0cce2eda
    • E
      USB: serial: sierra driver id_table additions · c5f3d87d
      由 Elina Pasheva 提交于 
      - Updated the id_table with all devices that Sierra Wireless currently
   support
 - Re-ordered the contents of the id_table for better readability
Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      c5f3d87d
    • K
      USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. · 14511412
      由 Krzysztof Halasa 提交于 
      Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
Signed-off-by: NKrzysztof Ha³asa <khc@pm.waw.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      14511412
    • O
      USB: fix race leading to a write after kfree in usbfs · 516a1a07
      由 Oliver Neukum 提交于 
      this fixes a race between async_completed() and proc_reapurbnonblock().

CPU A                   CPU B

spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
spin_unlock(&ps->lock);

                                if (!(as = async_getcompleted(ps)))
                                        return -EAGAIN;
                                return processcompl(as, (void __user * __user *)arg);

processcompl() calls free_async() which calls kfree(as)

as->status = urb->status;
if (as->signr) {
        sinfo.si_signo = as->signr;
        sinfo.si_errno = as->status;
        sinfo.si_code = SI_ASYNCIO;
        sinfo.si_addr = as->userurb;
        kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
                              as->euid, as->secid);
}
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb, as->userurb);

write after kfree
Signed-off-by: NOliver Neukum <oliver@neukum.org>
      516a1a07