Alexey Dobriyan reports that maxcpus=1 is still broken in 2.6.23-rc4:
if CONFIG_HOTPLUG_CPU is not set, x86_64 bootup oopses in show_stat() -
for_each_possible_cpu accesses a per-cpu area which was never set up.

Alexey identified commit 61ec7567
(ACPI: boot correctly with "nosmp" or "maxcpus=0") as the origin;
but it's not really to blame, just exposes a bug in 2.6.23-rc1's commit
8b3b2955 (Especially when !CONFIG_HOTPLUG_CPU,
avoid needlessy allocating resources for CPUs that can never become available).

rc1's test for max_cpus < 2 in start_kernel() wasn't working because
max_cpus was still NR_CPUS at that point: until rc4 moved the maxcpus
parsing earlier.  Now it sets cpu_possible_map to 1 before allocating
all possible per-cpu areas; then smp_init() expands cpu_possible_map
to cpu_present_map (0xf in my case) later on.

rc1's commit has good intentions, but expects cpu_present_map to be
limited by maxcpus, which is only the case on i386.  cpus_and(possible,
possible,present) might be good, but needs an audit of cpu_present_map
uses - there may well be assumptions that any cpu present is possible.

So stay safe for now and just revert those #ifndef CONFIG_HOTPLUG_CPU
optimizations in rc1's commit.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 61ec7567 ('ACPI: boot correctly
with "nosmp" or "maxcpus=0"') broke 'maxcpus=' handling on x86[-64].

maxcpus=N is now having no effect on x86_64, and freezing bootup on i386
(because of inconsistency with the separate maxcpus parsing down in
arch/i386, I guess).  That's because early_param parsing is a little
different from __setup parsing, and needs the "=" omitted: then it seems
to work as the original commit intended (no mention of IO-APIC in
/proc/interrupts when maxcpus=0).
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In MPS mode, "nosmp" and "maxcpus=0" boot a UP kernel with IOAPIC disabled.
However, in ACPI mode, these parameters didn't completely disable
the IO APIC initialization code and boot failed.

init/main.c:
	Disable the IO_APIC if "nosmp" or "maxcpus=0"
	undefine disable_ioapic_setup() when it doesn't apply.

i386:
	delete ioapic_setup(), it was a duplicate of parse_noapic()
	delete undefinition of disable_ioapic_setup()

x86_64:
	rename disable_ioapic_setup() to parse_noapic() to match i386
	define disable_ioapic_setup() in header to match i386

http://bugzilla.kernel.org/show_bug.cgi?id=1641Acked-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Especially when !CONFIG_HOTPLUG_CPU, avoid needlessy allocating resources for
CPUs that can never become available.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's useful sometimes to disable the softlockup checker at boottime.
Especially if it triggers during a distro install.
Signed-off-by: NDave Jones <davej@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and
include/asm-x86_64/serial.h.  the serial8250_ports need to be probed late in
serial initializing stage.  the console_init=>serial8250_console_init=>
register_console=>serial8250_console_setup will return -ENDEV, and console
ttyS0 can not be enabled at that time.  need to wait till uart_add_one_port in
drivers/serial/serial_core.c to call register_console to get console ttyS0.
that is too late.

Make early_uart to use early_param, so uart console can be used earlier.  Make
it to be bootconsole with CON_BOOT flag, so can use console handover feature.
and it will switch to corresponding normal serial console automatically.

new command line will be:
	console=uart8250,io,0x3f8,9600n8
	console=uart8250,mmio,0xff5e0000,115200n8
or
	earlycon=uart8250,io,0x3f8,9600n8
	earlycon=uart8250,mmio,0xff5e0000,115200n8

it will print in very early stage:
	Early serial console at I/O port 0x3f8 (options '9600n8')
	console [uart0] enabled
later for console it will print:
	console handover: boot [uart0] -> real [ttyS0]

Signed-off-by: <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

add the init_idle_bootup_task() callback to the bootup thread,
unused at the moment. (CFS will use it to switch the scheduling
class of the boot thread to the idle class)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Kill a special case in modpost by introducing the
__init_refok marker.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Explicitly set pgid and sid of init process to 1.
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: <containers@lists.osdl.org>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently there is a circular reference between work queue initialization
and kthread initialization.  This prevents the kthread infrastructure from
initializing until after work queues have been initialized.

We want the properties of tasks created with kthread_create to be as close
as possible to the init_task and to not be contaminated by user processes.
The later we start our kthreadd that creates these tasks the harder it is
to avoid contamination from user processes and the more of a mess we have
to clean up because the defaults have changed on us.

So this patch modifies the kthread support to not use work queues but to
instead use a simple list of structures, and to have kthreadd start from
init_task immediately after our kernel thread that execs /sbin/init.

By being a true child of init_task we only have to change those process
settings that we want to have different from init_task, such as our process
name, the cpus that are allowed, blocking all signals and setting SIGCHLD
to SIG_IGN so that all of our children are reaped automatically.

By being a true child of init_task we also naturally get our ppid set to 0
and do not wind up as a child of PID == 1.  Ensuring that tasks generated
by kthread_create will not slow down the functioning of the wait family of
functions.

[akpm@linux-foundation.org: use interruptible sleeps]
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

enhance the initcall_debug boot option:

 - measure the time the initcall took to execute and report
   it in units of milliseconds.

 - show the return code of initcalls (useful to see failures and
   to make sure that an initcall hung)

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a proper protype for prepare_namespace() in include/linux/init.h.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The nr_cpu_ids value is currently only calculated in smp_init.  However, it
may be needed before (SLUB needs it on kmem_cache_init!) and other kernel
components may also want to allocate dynamically sized per cpu array before
smp_init.  So move the determination of possible cpus into sched_init()
where we already loop over all possible cpus early in boot.

Also initialize both nr_node_ids and nr_cpu_ids with the highest value they
could take.  If we have accidental users before these values are determined
then the current valud of 0 may cause too small per cpu and per node arrays
to be allocated.  If it is set to the maximum possible then we only waste
some memory for early boot users.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In init/main.c we have a reference from rest_init() to .init.text
which is intentional.
Rename the function 'init' to 'kernel_init' to make it a
kernel wide unique symbol and whitelist the reference.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Let's allow page-alignment in general for per-cpu data (wanted by Xen, and
Ingo suggested KVM as well).

Because larger alignments can use more room, we increase the max per-cpu
memory to 64k rather than 32k: it's getting a little tight.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

We frequently need the maximum number of possible processors in order to
allocate arrays for all processors.  So far this was done using
highest_possible_processor_id().  However, we do need the number of
processors not the highest id.  Moreover the number was so far dynamically
calculated on each invokation.  The number of possible processors does not
change when the system is running.  We can therefore calculate that number
once.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

powerpc gets:

init/main.c: In function `do_basic_setup':
init/main.c:714: warning: implicit declaration of function `init_irq_proc'

but we cannot include linux/irq.h in generic code.

Fix it by moving the declaration into linux/interrupt.h instead.

And make sure all code that defines init_irq_proc() is including
linux/interrupt.h.

And nuke an ifdef-in-C

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With Ingo Molnar <mingo@elte.hu>

The tick-management code is the first user of the clockevents layer.  It takes
clock event devices from the clock events core and uses them to provide the
periodic tick.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With this change the sysctl inodes can be cached and nothing needs to be done
when removing a sysctl table.

For a cost of 2K code we will save about 4K of static tables (when we remove
de from ctl_table) and 70K in proc_dir_entries that we will not allocate, or
about half that on a 32bit arch.

The speed feels about the same, even though we can now cache the sysctl
dentries :(

We get the core advantage that we don't need to have a 1 to 1 mapping between
ctl table entries and proc files.  Making it possible to have /proc/sys vary
depending on the namespace you are in.  The currently merged namespaces don't
have an issue here but the network namespace under /proc/sys/net needs to have
different directories depending on which network adapters are visible.  By
simply being a cache different directories being visible depending on who you
are is trivial to implement.

[akpm@osdl.org: fix uninitialised var]
[akpm@osdl.org: fix ARM build]
[bunk@stusta.de: make things static]
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

o init() is a non __init function in .text section but it calls many
  functions which are in .init.text section. Hence MODPOST generates lots
  of cross reference warnings on i386 if compiled with CONFIG_RELOCATABLE=y

WARNING: vmlinux - Section mismatch: reference to .init.text:smp_prepare_cpus from .text between 'init' (at offset 0xc0101049) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:migration_init from .text between 'init' (at offset 0xc010104e) and 'rest_init'
WARNING: vmlinux - Section mismatch: reference to .init.text:spawn_ksoftirqd from .text between 'init' (at offset 0xc0101053) and 'rest_init'

o This patch breaks down init() in two parts. One part which can go
  in .init.text section and can be freed and other part which has to
  be non __init(init_post()). Now init() calls init_post() and init_post()
  does not call any functions present in .init sections. Hence getting
  rid of warnings.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Current implementation stores a static command-line buffer allocated to
COMMAND_LINE_SIZE size.  Most architectures stores two copies of this buffer,
one for future reference and one for parameter parsing.

Current kernel command-line size for most architecture is much too small for
module parameters, video settings, initramfs paramters and much more.  The
problem is that setting COMMAND_LINE_SIZE to a grater value, allocates static
buffers.

In order to allow a greater command-line size, these buffers should be
dynamically allocated or marked as init disposable buffers, so unused memory
can be released.

This patch renames the static saved_command_line variable into
boot_command_line adding __initdata attribute, so that it can be disposed
after initialization.  This rename is required so applications that use
saved_command_line will not be affected by this change.

It reintroduces saved_command_line as dynamically allocated buffer to match
the data in boot_command_line.

It also mark secondary command-line buffer as __initdata, and copies it to
dynamically allocated static_command_line buffer components may hold reference
to it after initialization.

This patch is for linux-2.6.20-rc4-mm1 and is divided to target each
architecture.  I could not check this in any architecture so please forgive me
if I got it wrong.

The per-architecture modification is very simple, use boot_command_line in
place of saved_command_line.  The common code is the change into dynamic
command-line.

This patch:

1. Rename saved_command_line into boot_command_line, mark as init
   disposable.

2. Add dynamic allocated saved_command_line.

3. Add dynamic allocated static_command_line.

4. During startup copy: boot_command_line into saved_command_line.  arch
   command_line into static_command_line.

5. Parse static_command_line and not arch command_line, so arch
   command_line may be freed.
Signed-off-by: NAlon Bar-Lev <alon.barlev@gmail.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the last (and commented out) invocation of the obsolete
smp_commence() call.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Acked-by: NIngo Molnar <mingo@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

o Some functions which should have been in init sections as they are called
  only once. Put them in init sections. Otherwise MODPOST generates warning
  as these functions are placed in .text and they end up accessing something
  in init sections.

WARNING: vmlinux - Section mismatch: reference to .init.text:migration_init
from .text between 'do_pre_smp_initcalls' (at offset 0xc01000d1) and
'run_init_process'
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Revert previous attempts at messing with the linux banner string and
simply use a separate format string for proc.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Acked-by: NOlaf Hering <olaf@aepfle.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The calls made by parse_parms to other initialization code might enable
interrupts again way too early.

Having interrupts on this early can make systems PANIC when they initialize
the IRQ controllers (which happens later in the code).  This patch detects
that irq's are enabled again, barfs about it and disables them again as a
safety net.

[akpm@osdl.org: cleanups]
Signed-off-by: NArd van Breemen <ard@telegraafnet.nl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a prototype for driver_init() in include/linux/device.h.

Also remove a static function of the same name in drivers/acpi/ibm_acpi.c to
ibm_acpi_driver_init() to fix the namespace collision.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We should not initialize rootfs before all the core initializers have
run.  So do it as a separate stage just before starting the regular
driver initializers.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As reported by Andy Whitcroft, at least the SLES9 initrd build process
depends on getting the kernel version from the kernel binary.  It does
that by simply trawling the binary and looking for the signature of the
"linux_banner" string (the string "Linux version " to be exact. Which
is really broken in itself, but whatever..)

That got broken when the string was changed to allow /proc/version to
change the UTS release information dynamically, and "get_kernel_version"
thus returned "%s" (see commit a2ee8649:
"[PATCH] Fix linux banner utsname information").

This just restores "linux_banner" as a static string, which should fix
the version finding.  And /proc/version simply uses a different string.

To avoid wasting even that miniscule amount of memory, the early boot
string should really be marked __initdata, but that just causes the same
bug in SLES9 to re-appear, since it will then find other occurrences of
"Linux version " first.

Cc: Andy Whitcroft <apw@shadowen.org>
Acked-by: NHerbert Poetzl <herbert@13thfloor.at>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Steve Fox <drfickle@us.ibm.com>
Acked-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a per pid_namespace child-reaper.  This is needed so processes are reaped
within the same pid space and do not spill over to the parent pid space.  Its
also needed so containers preserve existing semantic that pid == 1 would reap
orphaned children.

This is based on Eric Biederman's patch: http://lkml.org/lkml/2006/2/6/285Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

utsname information is shown in the linux banner, which also is used for
/proc/version (which can have different utsname values inside a uts
namespaces).  this patch makes the varying data arguments and changes the
string to a format string, using those arguments.
Signed-off-by: NHerbert Poetzl <herbert@13thfloor.at>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Keith says

Compiling 2.6.19-rc6 with gcc version 4.1.0 (SUSE Linux), wait_hpet_tick is
optimized away to a never ending loop and the kernel hangs on boot in timer
setup.

0000001a <wait_hpet_tick>:
  1a:   55                      push   %ebp
  1b:   89 e5                   mov    %esp,%ebp
  1d:   eb fe                   jmp    1d <wait_hpet_tick+0x3>

This is not a problem with gcc 3.3.5.  Adding barrier() calls to
wait_hpet_tick does not help, making the variables volatile does.

And the consensus is that gcc-4.1.0 is busted.  Suse went and shipped
gcc-4.1.0 so we cannot ban it.  Add a warning.

Cc: Keith Owens <kaos@ocs.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Both lhype and Xen want to call the core of the x86 cpu detect code before
calling start_kernel.

(extracted from larger patch)

AK: folded in start_kernel header patch
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

This changes the dwarf2 unwinder to do a binary search for CIEs
instead of a linear work. The linker is unfortunately not
able to build a proper lookup table at link time, instead it creates
one at runtime as soon as the bootmem allocator is usable (so you'll continue
using the linear lookup for the first [hopefully] few calls).
The code should be ready to utilize a build-time created table once
a fixed linker becomes available.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

There are a few places in the kernel where the init task is signaled.  The
ctrl+alt+del sequence is one them.  It kills a task, usually init, using a
cached pid (cad_pid).

This patch replaces the pid_t by a struct pid to avoid pid wrap around
problem.  The struct pid is initialized at boot time in init() and can be
modified through systctl with

	/proc/sys/kernel/cad_pid

[ I haven't found any distro using it ? ]

It also introduces a small helper routine kill_cad_pid() which is used
where it seemed ok to use cad_pid instead of pid 1.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The use of execve() in the kernel is dubious, since it relies on the
__KERNEL_SYSCALLS__ mechanism that stores the result in a global errno
variable.  As a first step of getting rid of this, change all users to a
global kernel_execve function that returns a proper error code.

This function is a terrible hack, and a later patch removes it again after the
kernel syscalls are gone.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Resetting the devices during driver initialization can be a costly
operation in terms of time (especially scsi devices).  This option can be
used by drivers to know that user forcibly wants the devices to be reset
during initialization.

This option can be useful while kernel is booting in unreliable
environment.  For ex.  during kdump boot where devices are in unknown
random state and BIOS execution has been skipped.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Needed for use of the unwinder in lockdep, because lockdep runs really
early too.

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>

We currently assume that boot parameters which are handled by
early_param() will not overlap boot parameters handled by __setup: if
they do, behaviour is dependent on link order, usually meaning __setup
will not get called.

ACPI wants to use early_param("pci"), and pci uses __setup("pci="), so
we modify the core to let them coexist: "pci=noacpi" will now get
passed to both.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndi Kleen <ak@suse.de>

Create a "taskstats" interface based on generic netlink (NETLINK_GENERIC
family), for getting statistics of tasks and thread groups during their
lifetime and when they exit.  The interface is intended for use by multiple
accounting packages though it is being created in the context of delay
accounting.

This patch creates the interface without populating the fields of the data
that is sent to the user in response to a command or upon the exit of a task.
Each accounting package interested in using taskstats has to provide an
additional patch to add its stats to the common structure.

[akpm@osdl.org: cleanups, Kconfig fix]
Signed-off-by: NShailabh Nagar <nagar@us.ibm.com>
Signed-off-by: NBalbir Singh <balbir@in.ibm.com>
Cc: Jes Sorensen <jes@sgi.com>
Cc: Peter Chubb <peterc@gelato.unsw.edu.au>
Cc: Erich Focht <efocht@ess.nec.de>
Cc: Levent Serinol <lserinol@gmail.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>