Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: au88x0 driver

Fixed the structures for equalizer.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: au88x0 driver

Fix the driver codes to run on 64bit architectures.
The patch taken from ALSA BTS bug#1047.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ICE1712 driver

Added the support of Prodigy-7.1LT board.
The patch taken from ALSA BTS bug#1090.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: YMFPCI driver

The routing of the effect 2/3 channels to the digital output is the
opposite of the rear analog output (left/right swapped).

We make the order correct for the digital output (which will make the
analog rear have the channels swapped) to make AC3 output work.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: Documentation,HDA Intel driver

Added single_cmd module option for debugging in the case CORB/RIRB
doesn't work well (e.g. due to wrong irq routings).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

Fix the detection of tertriary codec on SIS7012, including clean-ups
of relevant codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ENS1370/1+ driver

Fix resume of ens1370 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Digigram PCXHR driver

Suppress debug messages.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Fixed typos in alc882 model table.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

This little patch add the model for the motherboard K8N51 from Gigabyte
to the known models of ALC boards.
Signed-off-by: NArnaud Patard <apatard@mandriva.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

* Fix init sequence so manually retaskable jacks don't get added to
  the line_out list.
* Update intel mobo config defaults to specify surround outputs
  as line outs rather than speakers.
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,Intel8x0 driver

Added MCP51 PCI ID to intel8x0 driver.
Also, updated the supported chips in documentation.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Fixed the wrong widget id for line-2 selector in the init verb
of ALC260.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Fix max_channels computation for STAC92xx codecs in the case only
HP pin without line-out pins is detected in the default pin config.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Added the dxs entry for P4M800/VIA8237R,
reported by OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Adds support for the SigmaTel STAC927x HDA codec family.
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Add SigmaTel HDA support for the Intel D975XBK motherboard.
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

This adds support for Agere's variant of Si3054/5 based HDA modem.
Signed-off-by: NSasha Khapyorsky <sashak@alsa-project.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Add dxs entry for a FSC board.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Digigram PCXHR driver

sound/pci/pcxhr/pcxhr.c: In function 'pcxhr_update_r_buffer':
sound/pci/pcxhr/pcxhr.c:460: warning: unsigned int format, different type arg (arg 7)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: RME9652 driver

sound/pci/rme9652/hdspm.c: In function 'snd_hdspm_preallocate_memory':
sound/pci/rme9652/hdspm.c:3327: warning: int format, different type arg (arg 4)
sound/pci/rme9652/hdspm.c:3331: warning: int format, different type arg (arg 4)
sound/pci/rme9652/hdspm.c: In function 'snd_hdspm_create':
sound/pci/rme9652/hdspm.c:3513: warning: int format, different type arg (arg 4)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: CS46xx driver

Reported by <dcb314@hotmail.com> in
http://bugzilla.kernel.org/show_bug.cgi?id=5903Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: au88x0 driver

Fixed an uninitialized variable.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Added the dxs_support entry for EpoX 9HEAI.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Added the missing 'Capture Switch' control for Sigmatel STAC92xx codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

This patch adds a quirk entry for the Dell Optiplex GX270, on which
the volume is set by the headphone control, not the master control.
Signed-off-by: NChris Ball <cjb@mrao.cam.ac.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALI5451 driver

This patch uses #defines for the Vendor ID and Device ID and uses the
new PCI_DEVICE macro.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Trident driver

Some pcnet32 hardware erroneously has the Vendor ID for Trident.  The
pcnet32 driver looks for the PCI ethernet class before grabbing the
hardware, but the current trident driver does not check against the
PCI audio class.  This allows the trident driver to claim the pcnet32
hardware.  This patch prevents that.

Per Jiri Slaby's request, I changed the trident driver to use
PCI_DEVICE macro and PCI ID #defines.

This patch is untested on Trident 4DWAVE_DX hardware, but has been
tested on pcnet32 hardware.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: YMFPCI driver

Set the (read only) sample rate field in the IEC958 mixer controls to
48 kHz (instead of 44.1 kHz) because that is the rate actually
supported by the hardware.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: AC97 Codec

Fix CLFE channel setting of ALC850 (ALSA bug#1731).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: CS5535 driver

Added AMD CS5536 to the cs5535audio driver.
Signed-off-by: NRene Rebe <rene@exactcode.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: BT87x driver
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: AC97 Codec

Added a blacklist to suppress to create jack sense controls.
These controls must be always off on some devices (e.g. Thinkpad).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Added an ALC260 model entry (basic) for Sony VAIO.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Digigram PCXHR driver

Fix the hardware set up when the sample rate is changed multiple times.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Intel driver

This patch adds the Intel ICH8 HD Audio DID to the hda_intel.c audio driver.
Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: CA0106 driver

Description:
Shuttle XPC SD11G5 which has an onboard Creative Labs
Sound Blaster Live! 24-bit EAX
high-definition 7.1 audio processor'.
Fixes ALSA bug#1600
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: VIA82xx driver

Added a dxs_support entry for Jetway K8M8MS.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver

Fix the confliction of 'Front' controls on models with STAC9758 codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>