Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 06 9月, 2009 28 次提交
  3. 05 9月, 2009 12 次提交
    • S
      firewire: sbp2: fix freeing of unallocated memory · baed6b82
      由 Stefan Richter 提交于 
      If a target writes invalid status (typically status of a command that
already timed out), firewire-sbp2 attempts to put away an ORB that
doesn't exist.  https://bugzilla.redhat.com/show_bug.cgi?id=519772Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      baed6b82
    • S
      firewire: ohci: fix Ricoh R5C832, video reception · 4fe0badd
      由 Stefan Richter 提交于 
      In dual-buffer DMA mode, no video frames are ever received from R5C832
by libdc1394.  Fallback to packet-per-buffer DMA works reliably.
http://thread.gmane.org/gmane.linux.kernel.firewire.devel/13393/focus=13476Reported-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      4fe0badd
    • S
      firewire: ohci: fix Agere FW643 and multiple cameras · fc383796
      由 Stefan Richter 提交于 
      An Agere FW643 OHCI 1.1 card works fine for video reception from one
camera but fails early if receiving from two cameras.  After a short
while, no IR IRQ events occur and the context control register does not
react anymore.  This happens regardless whether both IR DMA contexts are
dual-buffer or one is dual-buffer and the other packet-per-buffer.

This can be worked around by disabling dual buffer DMA mode entirely.
http://sourceforge.net/mailarchive/message.php?msg_name=4A7C0594.2020208%40gmail.com
(Reported by Samuel Audet.)

In another report (by Jonathan Cameron), an FW643 works OK with two
cameras in dual buffer mode.  Whether this is due to different chip
revisions or different usage patterns (different video formats) is not
yet clear.  However, as far as the current capabilities of
firewire-core's isochronous I/O interface are concerned, simply
switching off dual-buffer on non-working and working FW643s alike is not
a problem in practice.  We only need to revisit this issue if we are
going to enhance the interface, e.g. so that applications can explicitly
choose modes.
Reported-by: NSamuel Audet <samuel.audet@gmail.com>
Reported-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      fc383796
    • S
      firewire: core: fix crash in iso resource management · 1821bc19
      由 Stefan Richter 提交于 
      This fixes a regression due to post 2.6.30 commit "firewire: core: do
not DMA-map stack addresses" 6fdc0370.

As David Moore noted, a previously correct sizeof() expression became
wrong since the commit changed its argument from an array to a pointer.
This resulted in an oops in ohci_cancel_packet in the shared workqueue
thread's context when an isochronous resource was to be freed.
Reported-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      1821bc19
    • S
      ocfs2: ocfs2_write_begin_nolock() should handle len=0 · 8379e7c4
      由 Sunil Mushran 提交于 
      Bug introduced by mainline commit e7432675
The bug causes ocfs2_write_begin_nolock() to oops when len=0.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
      8379e7c4
    • M
      dm snapshot: fix on disk chunk size validation · ae0b7448
      由 Mikulas Patocka 提交于 
      Fix some problems seen in the chunk size processing when activating a
pre-existing snapshot.

For a new snapshot, the chunk size can either be supplied by the creator
or a default value can be used.  For an existing snapshot, the
chunk size in the snapshot header on disk should always be used.

If someone attempts to load an existing snapshot and has the 'default
chunk size' option set, the kernel uses its default value even when it
is incorrect for the snapshot being loaded.  This patch ensures the
correct on-disk value is always used.

Secondly, when the code does use the chunk size stored on the disk it is
prudent to revalidate it, so the code can exit cleanly if it got
corrupted as happened in
https://bugzilla.redhat.com/show_bug.cgi?id=461506 .

Cc: stable@kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      ae0b7448
    • M
      dm exception store: split set_chunk_size · 2defcc3f
      由 Mikulas Patocka 提交于 
      Break the function set_chunk_size to two functions in preparation for
the fix in the following patch.

Cc: stable@kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      2defcc3f
    • M
      dm snapshot: fix header corruption race on invalidation · 61578dcd
      由 Mikulas Patocka 提交于 
      If a persistent snapshot fills up, a race can corrupt the on-disk header
which causes a crash on any future attempt to activate the snapshot
(typically while booting).  This patch fixes the race.

When the snapshot overflows, __invalidate_snapshot is called, which calls
snapshot store method drop_snapshot. It goes to persistent_drop_snapshot that
calls write_header. write_header constructs the new header in the "area"
location.

Concurrently, an existing kcopyd job may finish, call copy_callback
and commit_exception method, that goes to persistent_commit_exception.
persistent_commit_exception doesn't do locking, relying on the fact that
callbacks are single-threaded, but it can race with snapshot invalidation and
overwrite the header that is just being written while the snapshot is being
invalidated.

The result of this race is a corrupted header being written that can
lead to a crash on further reactivation (if chunk_size is zero in the
corrupted header).

The fix is to use separate memory areas for each.

See the bug: https://bugzilla.redhat.com/show_bug.cgi?id=461506

Cc: stable@kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      61578dcd
    • M
      dm snapshot: refactor zero_disk_area to use chunk_io · 02d2fd31
      由 Mikulas Patocka 提交于 
      Refactor chunk_io to prepare for the fix in the following patch.

Pass an area pointer to chunk_io and simplify zero_disk_area to use
chunk_io.  No functional change.

Cc: stable@kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      02d2fd31
    • J
      dm log: userspace add luid to distinguish between concurrent log instances · 7ec23d50
      由 Jonathan Brassow 提交于 
      Device-mapper userspace logs (like the clustered log) are
identified by a universally unique identifier (UUID).  This
identifier is used to associate requests from the kernel to
a specific log in userspace.  The UUID must be unique everywhere,
since multiple machines may use this identifier when communicating
about a particular log, as is the case for cluster logs.

Sometimes, device-mapper/LVM may re-use a UUID.  This is the
case during pvmoves, when moving from one segment of an LV
to another, or when resizing a mirror, etc.  In these cases,
a new log is created with the same UUID and loaded in the
"inactive" slot.  When a device-mapper "resume" is issued,
the "live" table is deactivated and the new "inactive" table
becomes "live".  (The "inactive" table can also be removed
via a device-mapper 'clear' command.)

The above two issues were colliding.  More than one log was being
created with the same UUID, and there was no way to distinguish
between them.  So, sometimes the wrong log would be swapped
out during the exchange.

The solution is to create a locally unique identifier,
'luid', to go along with the UUID.  This new identifier is used
to determine exactly which log is being referenced by the kernel
when the log exchange is made.  The identifier is not
universally safe, but it does not need to be, since
create/destroy/suspend/resume operations are bound to a specific
machine; and these are the operations that make up the exchange.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      7ec23d50
    • J
      dm raid1: do not allow log_failure variable to unset after being set · d2b69864
      由 Jonathan Brassow 提交于 
      This patch fixes a bug which was triggering a case where the primary leg
could not be changed on failure even when the mirror was in-sync.

The case involves the failure of the primary device along with
the transient failure of the log device.  The problem is that
bios can be put on the 'failures' list (due to log failure)
before 'fail_mirror' is called due to the primary device failure.
Normally, this is fine, but if the log device failure is transient,
a subsequent iteration of the work thread, 'do_mirror', will
reset 'log_failure'.  The 'do_failures' function then resets
the 'in_sync' variable when processing bios on the failures list.
The 'in_sync' variable is what is used to determine if the
primary device can be switched in the event of a failure.  Since
this has been reset, the primary device is incorrectly assumed
to be not switchable.

The case has been seen in the cluster mirror context, where one
machine realizes the log device is dead before the other machines.
As the responsibilities of the server migrate from one node to
another (because the mirror is being reconfigured due to the failure),
the new server may think for a moment that the log device is fine -
thus resetting the 'log_failure' variable.

In any case, it is inappropiate for us to reset the 'log_failure'
variable.  The above bug simply illustrates that it can actually
hurt us.

Cc: stable@kernel.org
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      d2b69864
    • J
      dm log: remove incorrect field from userspace table output · b8313b6d
      由 Jonathan Brassow 提交于 
      The output of 'dmsetup table' includes an internal field that should not
be there.  This patch removes it.  To make the fix simpler, we first
reorder a constructor argument

The 'device size' argument is generated internally.  Currently it is
placed as the last space-separated word of the constructor string.
However, we need to use a version of the string without this word, so we
move it to the beginning instead so it is trivial to skip past it.

We keep a copy of the arguments passed to userspace for creating a log,
just in case we need to resend them.  These are the same arguments that
are desired in the STATUSTYPE_TABLE request, except for one.  When
creating the userspace log, the userspace daemon must know the size of
the mirror, so that is added to the arguments given in the constructor
table.  We were printing this extra argument out as well, which is a
mistake.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      b8313b6d