Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 09 7月, 2012 3 次提交
    • A
      KVM: Split cpuid register access from computation · 62046e5a
      由 Avi Kivity 提交于 
      Introduce kvm_cpuid() to perform the leaf limit check and calculate
register values, and let kvm_emulate_cpuid() just handle reading and
writing the registers from/to the vcpu.  This allows us to reuse
kvm_cpuid() in a context where directly reading and writing registers
is not desired.
Signed-off-by: NAvi Kivity <avi@redhat.com>
      62046e5a
    • A
      KVM: VMX: Return correct CPL during transition to protected mode · d881e6f6
      由 Avi Kivity 提交于 
      In protected mode, the CPL is defined as the lower two bits of CS, as set by
the last far jump.  But during the transition to protected mode, there is no
last far jump, so we need to return zero (the inherited real mode CPL).

Fix by reading CPL from the cache during the transition.  This isn't 100%
correct since we don't set the CPL cache on a far jump, but since protected
mode transition will always jump to a segment with RPL=0, it will always
work.
Signed-off-by: NAvi Kivity <avi@redhat.com>
      d881e6f6
    • A
      KVM: MMU: Force cr3 reload with two dimensional paging on mov cr3 emulation · e676505a
      由 Avi Kivity 提交于 
      Currently the MMU's ->new_cr3() callback does nothing when guest paging
is disabled or when two-dimentional paging (e.g. EPT on Intel) is active.
This means that an emulated write to cr3 can be lost; kvm_set_cr3() will
write vcpu-arch.cr3, but the GUEST_CR3 field in the VMCS will retain its
old value and this is what the guest sees.

This bug did not have any effect until now because:
- with unrestricted guest, or with svm, we never emulate a mov cr3 instruction
- without unrestricted guest, and with paging enabled, we also never emulate a
  mov cr3 instruction
- without unrestricted guest, but with paging disabled, the guest's cr3 is
  ignored until the guest enables paging; at this point the value from arch.cr3
  is loaded correctly my the mov cr0 instruction which turns on paging

However, the patchset that enables big real mode causes us to emulate mov cr3
instructions in protected mode sometimes (when guest state is not virtualizable
by vmx); this mov cr3 is effectively ignored and will crash the guest.

The fix is to make nonpaging_new_cr3() call mmu_free_roots() to force a cr3
reload.  This is awkward because now all the new_cr3 callbacks to the same
thing, and because mmu_free_roots() is somewhat of an overkill; but fixing
that is more complicated and will be done after this minimal fix.

Observed in the Window XP 32-bit installer while bringing up secondary vcpus.
Signed-off-by: NAvi Kivity <avi@redhat.com>
      e676505a
  3. 07 7月, 2012 1 次提交
  5. 04 7月, 2012 9 次提交
  7. 25 6月, 2012 8 次提交
    • M
      KVM: host side for eoi optimization · ae7a2a3f
      由 Michael S. Tsirkin 提交于 
      Implementation of PV EOI using shared memory.
This reduces the number of exits an interrupt
causes as much as by half.

The idea is simple: there's a bit, per APIC, in guest memory,
that tells the guest that it does not need EOI.
We set it before injecting an interrupt and clear
before injecting a nested one. Guest tests it using
a test and clear operation - this is necessary
so that host can detect interrupt nesting -
and if set, it can skip the EOI MSR.

There's a new MSR to set the address of said register
in guest memory. Otherwise not much changed:
- Guest EOI is not required
- Register is tested & ISR is automatically cleared on exit

For testing results see description of previous patch
'kvm_para: guest side for eoi avoidance'.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      ae7a2a3f
    • M
      KVM: rearrange injection cancelling code · d905c069
      由 Michael S. Tsirkin 提交于 
      Each time we need to cancel injection we invoke same code
(cancel_injection callback).  Move it towards the end of function using
the familiar goto on error pattern.

Will make it easier to do more cleanups for PV EOI.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      d905c069
    • M
      KVM: only sync when attention bits set · 5cfb1d5a
      由 Michael S. Tsirkin 提交于 
      Commit eb0dc6d0368072236dcd086d7fdc17fd3c4574d4 introduced apic
attention bitmask but kvm still syncs lapic unconditionally.
As that commit suggested and in anticipation of adding more attention
bits, only sync lapic if(apic_attention).
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      5cfb1d5a
    • M
      KVM: eoi msi documentation · c1af87dc
      由 Michael S. Tsirkin 提交于 
      Document the new EOI MSR. Couldn't decide whether this change belongs
conceptually on guest or host side, so a separate patch.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      c1af87dc
    • M
      x86, bitops: note on __test_and_clear_bit atomicity · d0a69d63
      由 Michael S. Tsirkin 提交于 
      __test_and_clear_bit is actually atomic with respect
to the local CPU. Add a note saying that KVM on x86
relies on this behaviour so people don't accidentaly break it.
Also warn not to rely on this in portable code.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      d0a69d63
    • M
      KVM guest: guest side for eoi avoidance · ab9cf499
      由 Michael S. Tsirkin 提交于 
      The idea is simple: there's a bit, per APIC, in guest memory,
that tells the guest that it does not need EOI.
Guest tests it using a single est and clear operation - this is
necessary so that host can detect interrupt nesting - and if set, it can
skip the EOI MSR.

I run a simple microbenchmark to show exit reduction
(note: for testing, need to apply follow-up patch
'kvm: host side for eoi optimization' + a qemu patch
 I posted separately, on host):

Before:

Performance counter stats for 'sleep 1s':

            47,357 kvm:kvm_entry                                                [99.98%]
                 0 kvm:kvm_hypercall                                            [99.98%]
                 0 kvm:kvm_hv_hypercall                                         [99.98%]
             5,001 kvm:kvm_pio                                                  [99.98%]
                 0 kvm:kvm_cpuid                                                [99.98%]
            22,124 kvm:kvm_apic                                                 [99.98%]
            49,849 kvm:kvm_exit                                                 [99.98%]
            21,115 kvm:kvm_inj_virq                                             [99.98%]
                 0 kvm:kvm_inj_exception                                        [99.98%]
                 0 kvm:kvm_page_fault                                           [99.98%]
            22,937 kvm:kvm_msr                                                  [99.98%]
                 0 kvm:kvm_cr                                                   [99.98%]
                 0 kvm:kvm_pic_set_irq                                          [99.98%]
                 0 kvm:kvm_apic_ipi                                             [99.98%]
            22,207 kvm:kvm_apic_accept_irq                                      [99.98%]
            22,421 kvm:kvm_eoi                                                  [99.98%]
                 0 kvm:kvm_pv_eoi                                               [99.99%]
                 0 kvm:kvm_nested_vmrun                                         [99.99%]
                 0 kvm:kvm_nested_intercepts                                    [99.99%]
                 0 kvm:kvm_nested_vmexit                                        [99.99%]
                 0 kvm:kvm_nested_vmexit_inject                                    [99.99%]
                 0 kvm:kvm_nested_intr_vmexit                                    [99.99%]
                 0 kvm:kvm_invlpga                                              [99.99%]
                 0 kvm:kvm_skinit                                               [99.99%]
                57 kvm:kvm_emulate_insn                                         [99.99%]
                 0 kvm:vcpu_match_mmio                                          [99.99%]
                 0 kvm:kvm_userspace_exit                                       [99.99%]
                 2 kvm:kvm_set_irq                                              [99.99%]
                 2 kvm:kvm_ioapic_set_irq                                       [99.99%]
            23,609 kvm:kvm_msi_set_irq                                          [99.99%]
                 1 kvm:kvm_ack_irq                                              [99.99%]
               131 kvm:kvm_mmio                                                 [99.99%]
               226 kvm:kvm_fpu                                                  [100.00%]
                 0 kvm:kvm_age_page                                             [100.00%]
                 0 kvm:kvm_try_async_get_page                                    [100.00%]
                 0 kvm:kvm_async_pf_doublefault                                    [100.00%]
                 0 kvm:kvm_async_pf_not_present                                    [100.00%]
                 0 kvm:kvm_async_pf_ready                                       [100.00%]
                 0 kvm:kvm_async_pf_completed

       1.002100578 seconds time elapsed

After:

 Performance counter stats for 'sleep 1s':

            28,354 kvm:kvm_entry                                                [99.98%]
                 0 kvm:kvm_hypercall                                            [99.98%]
                 0 kvm:kvm_hv_hypercall                                         [99.98%]
             1,347 kvm:kvm_pio                                                  [99.98%]
                 0 kvm:kvm_cpuid                                                [99.98%]
             1,931 kvm:kvm_apic                                                 [99.98%]
            29,595 kvm:kvm_exit                                                 [99.98%]
            24,884 kvm:kvm_inj_virq                                             [99.98%]
                 0 kvm:kvm_inj_exception                                        [99.98%]
                 0 kvm:kvm_page_fault                                           [99.98%]
             1,986 kvm:kvm_msr                                                  [99.98%]
                 0 kvm:kvm_cr                                                   [99.98%]
                 0 kvm:kvm_pic_set_irq                                          [99.98%]
                 0 kvm:kvm_apic_ipi                                             [99.99%]
            25,953 kvm:kvm_apic_accept_irq                                      [99.99%]
            26,132 kvm:kvm_eoi                                                  [99.99%]
            26,593 kvm:kvm_pv_eoi                                               [99.99%]
                 0 kvm:kvm_nested_vmrun                                         [99.99%]
                 0 kvm:kvm_nested_intercepts                                    [99.99%]
                 0 kvm:kvm_nested_vmexit                                        [99.99%]
                 0 kvm:kvm_nested_vmexit_inject                                    [99.99%]
                 0 kvm:kvm_nested_intr_vmexit                                    [99.99%]
                 0 kvm:kvm_invlpga                                              [99.99%]
                 0 kvm:kvm_skinit                                               [99.99%]
               284 kvm:kvm_emulate_insn                                         [99.99%]
                68 kvm:vcpu_match_mmio                                          [99.99%]
                68 kvm:kvm_userspace_exit                                       [99.99%]
                 2 kvm:kvm_set_irq                                              [99.99%]
                 2 kvm:kvm_ioapic_set_irq                                       [99.99%]
            28,288 kvm:kvm_msi_set_irq                                          [99.99%]
                 1 kvm:kvm_ack_irq                                              [99.99%]
               131 kvm:kvm_mmio                                                 [100.00%]
               588 kvm:kvm_fpu                                                  [100.00%]
                 0 kvm:kvm_age_page                                             [100.00%]
                 0 kvm:kvm_try_async_get_page                                    [100.00%]
                 0 kvm:kvm_async_pf_doublefault                                    [100.00%]
                 0 kvm:kvm_async_pf_not_present                                    [100.00%]
                 0 kvm:kvm_async_pf_ready                                       [100.00%]
                 0 kvm:kvm_async_pf_completed

       1.002039622 seconds time elapsed

We see that # of exits is almost halved.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      ab9cf499
    • M
      KVM: optimize ISR lookups · 8680b94b
      由 Michael S. Tsirkin 提交于 
      We perform ISR lookups twice: during interrupt
injection and on EOI. Typical workloads only have
a single bit set there. So we can avoid ISR scans by
1. counting bits as we set/clear them in ISR
2. on set, caching the injected vector number
3. on clear, invalidating the cache

The real purpose of this is enabling PV EOI
which needs to quickly validate the vector.
But non PV guests also benefit: with this patch,
and without interrupt nesting, apic_find_highest_isr
will always return immediately without scanning ISR.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      8680b94b
    • M
      KVM: document lapic regs field · 5eadf916
      由 Michael S. Tsirkin 提交于 
      Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      5eadf916
  9. 19 6月, 2012 1 次提交
  11. 18 6月, 2012 2 次提交
  13. 14 6月, 2012 4 次提交
  15. 12 6月, 2012 1 次提交
  17. 06 6月, 2012 4 次提交
    • A
      Merge branch 'for-upstream' of git://github.com/agraf/linux-2.6 into next · 25e531a9
      由 Avi Kivity 提交于 
      Alex says:

"Changes this time include:

  - Generalize KVM_GUEST support to overall ePAPR code
  - Fix reset for Book3S HV
  - Fix machine check deferral when CONFIG_KVM_GUEST=y
  - Add support for BookE register DECAR"

* 'for-upstream' of git://github.com/agraf/linux-2.6:
  KVM: PPC: Not optimizing MSR_CE and MSR_ME with paravirt.
  KVM: PPC: booke: Added DECAR support
  KVM: PPC: Book3S HV: Make the guest hash table size configurable
  KVM: PPC: Factor out guest epapr initialization
Signed-off-by: NAvi Kivity <avi@redhat.com>
      25e531a9
    • M
      KVM: disable uninitialized var warning · 79f702a6
      由 Michael S. Tsirkin 提交于 
      I see this in 3.5-rc1:

arch/x86/kvm/mmu.c: In function ‘kvm_test_age_rmapp’:
arch/x86/kvm/mmu.c:1271: warning: ‘iter.desc’ may be used uninitialized in this function

The line in question was introduced by commit
1e3f42f0

 static int kvm_test_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
                              unsigned long data)
 {
-       u64 *spte;
+       u64 *sptep;
+       struct rmap_iterator iter;   <- line 1271
        int young = 0;

        /*

The reason I think is that the compiler assumes that
the rmap value could be 0, so

static u64 *rmap_get_first(unsigned long rmap, struct rmap_iterator
*iter)
{
        if (!rmap)
                return NULL;

        if (!(rmap & 1)) {
                iter->desc = NULL;
                return (u64 *)rmap;
        }

        iter->desc = (struct pte_list_desc *)(rmap & ~1ul);
        iter->pos = 0;
        return iter->desc->sptes[iter->pos];
}

will not initialize iter.desc, but the compiler isn't
smart enough to see that

        for (sptep = rmap_get_first(*rmapp, &iter); sptep;
             sptep = rmap_get_next(&iter)) {

will immediately exit in this case.
I checked by adding
        if (!*rmapp)
                goto out;
on top which is clearly equivalent but disables the warning.

This patch uses uninitialized_var to disable the warning without
increasing code size.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      79f702a6
    • C
      KVM: Cleanup the kvm_print functions and introduce pr_XX wrappers · a737f256
      由 Christoffer Dall 提交于 
      Introduces a couple of print functions, which are essentially wrappers
around standard printk functions, with a KVM: prefix.

Functions introduced or modified are:
 - kvm_err(fmt, ...)
 - kvm_info(fmt, ...)
 - kvm_debug(fmt, ...)
 - kvm_pr_unimpl(fmt, ...)
 - pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...)
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      a737f256
    • C
      KVM: s390: Change maintainer · 4ae57b6c
      由 Christian Borntraeger 提交于 
      Since Carsten is now working on a different project, Cornelia will
work as the 2nd s390/kvm maintainer.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
CC: Carsten Otte <cotte@de.ibm.com>
CC: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      4ae57b6c
  19. 05 6月, 2012 7 次提交