TechnoTrend CT2-4500 CI is a PCIe device with DVB-T2/C tuner. It is
similar to DVBSky T980C, just with different PCI ID and remote controller.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

DVBSky s950ci dvb-s/s2 ci PCIe card:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>ci controller: CIMAX SP2 or its clone.
3>PCIe bridge: CX23885

The patchs are based on the following patchs.
Olli Salonen submit:
https://patchwork.linuxtv.org/patch/26180/
https://patchwork.linuxtv.org/patch/26183/
https://patchwork.linuxtv.org/patch/26324/
Nibble Max submit:
https://patchwork.linuxtv.org/patch/26207/Signed-off-by: NNibble Max <nibble.max@gmail.com>
Reviewed-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

DVBSky s950ci dvb-s/s2 ci PCIe card:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>ci controller: CIMAX SP2 or its clone.
3>PCIe bridge: CX23885

The patchs are based on the following patchs.
Olli Salonen submit:
https://patchwork.linuxtv.org/patch/26180/
https://patchwork.linuxtv.org/patch/26183/
https://patchwork.linuxtv.org/patch/26324/
Nibble Max submit:
https://patchwork.linuxtv.org/patch/26207/Signed-off-by: NNibble Max <nibble.max@gmail.com>
Reviewed-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use dev_err instead of pt1_printk
o reduce object code size
o remove now unused pt1_printk macro

Neaten dev_<level> uses in pt3
o add missing newlines
o align arguments
o remove unnecessary OOM messages as there's a generic one
o typo fixes in messages
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now works with both NTSC and PAL. Tested with CC/XDS for NTSC and
teletext/WSS for PAL. The start lines were wrong, the WSS signal
wasn't captured and there was no difference between NTSC and PAL
w.r.t. the count[] values so NTSC returned way too many lines.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Move pci_disable_device() down otherwise it will complain about an
unfreed irq.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Don't mix UNSET and TUNER_ABSENT: you have to pick one or the other. For
this driver selecting UNSET to represent an absent tuner resulting in
the fewest changes.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make sure that changing the standard or format is not allowed while
one or more of the video, vbi or mpeg vb2 queues are busy.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The vb2 framework knows if streaming is in progress, no need to use
a separate field for that.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The width, height and field values are core fields since both vbi, video
and blackbird use the same video input.

Move those fields to the correct struct.

Also fix the field checks in the try_fmt functions: add V4L2_FIELD_SEQ_BT/TB
support and map incorrect field values to a correct field value instead of
returning an error.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

There is no reason to dump the sram code to the kernel log when you
stop streaming. Remove those calls to cx88_sram_channel_dump.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The timeout is way too small. Especially complicated command like
CX2341X_ENC_STOP_CAPTURE takes much more time than 10 ms. Increase the
timeout to 1 second, just as ivtv does (the cx88-blackbird has the
same IP core for MPEG compression as ivtv).

This solves a nasty issue where STOP_CAPTURE would timeout and the
mailbox is left in a busy state, making it impossible to start streaming
a second time without reloading the driver first.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

btcx-risc is for the bt8xx driver and other drivers shouldn't depend
on it. There is no benefit to use that module just to do a
pci_zalloc_consistent.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Remove this function. This makes all vb2 queues behave the same, which
simplifies comparing the various vb2 queue op implementations.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Don't return -1, return a proper error.

Replace dprintk(0, ...) by pr_err since firmware load errors should just be
reported as an error.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/cx88/cx88-blackbird.c:476:25: warning: cast to restricted __le32
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As usual, this patch is very large due to the fact that half a vb2 conversion
isn't possible. And since this affects blackbird, alsa, core, dvb, vbi and
video the changes are all over.

What made this more difficult was the peculiar way the risc program was setup.
The driver allowed for running out of buffers in which case the DMA would stop
and restart when the next buffer was queued. There was also a complicated
timeout system for when buffers weren't filled. This was replaced by a much
simpler scheme where there is always one buffer around and the DMA will just
cycle that buffer until a new buffer is queued. In that case the previous
buffer will be chained to the new buffer. An interrupt is generated at the
start of the new buffer telling the driver that the previous buffer can be
passed on to userspace.

Much simpler and more robust.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The alsa driver uses videobuf low-level functions that are not
available in vb2, so replace them by driver-specific functions.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This list is only used if the width, height and/or format of a buffer has
changed, but that can never happen. Remove it and all associated code.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This is a duplicate of dev->fmt and can be removed. As a consequence a
lot of tests that check if the format has changed midstream can be
removed as well: the format cannot change midstream, so this is a bogus
check.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

DVBSky T9580 uses Integrated CX23885 IR controller to decode IR signal.
The IR type of DVBSky remote control is RC5.
Signed-off-by: NNibble Max <nibble.max@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add CI support for DVBSky T980C card. The new host device independent CIMaX SP2 I2C driver was used to implement it.

IRQ handling is not implemented at this point. It could be used to detect the CAM insertion/removal instantly.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

If the CI chip has an I2C driver, we need to store I2C client into state.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch adds basic support for DVBSky T980C card. CI interface is not supported.

DVBSky T980C is a PCIe card with the following components:
- CX23885 PCIe bridge
- Si2168-A20 demodulator
- Si2158-A20 tuner
- CIMaX SP2 CI chip

The demodulator and tuner need firmware. They're the same as used with TT CT2-4650 CI:
https://www.mail-archive.com/linux-media@vger.kernel.org/msg78033.htmlSigned-off-by: NOlli Salonen <olli.salonen@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

tw68 doesn't use i2c at all, so remove this bogus dependency to prevent
this warning:

warning: (CAN_PEAK_PCIEC && SFC && IGB && VIDEO_TW68 && DRM && FB_DDC && FB_VIA) selects I2C_ALGOBIT which has unmet direct dependencies (I2C)
   CC [M]  drivers/i2c/algos/i2c-algo-bit.o
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_bus':
../drivers/i2c/algos/i2c-algo-bit.c:658:33: error: 'i2c_add_adapter' undeclared (first use in this function)
../drivers/i2c/algos/i2c-algo-bit.c:658:33: note: each undeclared identifier is reported only once for each function it appears in
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_numbered_bus':
../drivers/i2c/algos/i2c-algo-bit.c:664:33: error: 'i2c_add_numbered_adapter' undeclared (first use in this function)
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_bus':
../drivers/i2c/algos/i2c-algo-bit.c:659:1: warning: control reaches end of non-void function [-Wreturn-type]
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_numbered_bus':
../drivers/i2c/algos/i2c-algo-bit.c:665:1: warning: control reaches end of non-void function [-Wreturn-type]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

See include/linux/interrupt.h:
"This flag is a NOOP and scheduled to be removed"
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The config structs used for DVBSky T9580 were not initialized. This patch fixes that.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Get rid of 'module_is_live' usage.

on x86_64:
when CONFIG_MODULES is not enabled:

../drivers/media/pci/pt3/pt3.c: In function 'pt3_attach_fe':
../drivers/media/pci/pt3/pt3.c:433:6: error: implicit declaration of function 'module_is_live' [-Werror=implicit-function-declaration]
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Akihiro Tsukada <tskd08@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

size_t is unsigned.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by smatch:

drivers/media/pci/cx88/cx88-video.c:699 get_queue() info: ignoring unreachable code.
drivers/media/pci/cx88/cx88-video.c:714 get_resource() info: ignoring unreachable code.
drivers/media/pci/cx88/cx88-video.c:815 video_read() info: ignoring unreachable code.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This is actually a coding style issue, but it was generating lots
of smatch warnings:

drivers/media/pci/cx88/cx88-cards.c:1513:37: warning: Initializer entry defined twice
drivers/media/pci/cx88/cx88-cards.c:1517:19:   also defined here
drivers/media/pci/cx88/cx88-cards.c:1533:36: warning: Initializer entry defined twice
drivers/media/pci/cx88/cx88-cards.c:1538:19:   also defined here
...
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Those symbols are used only at saa7164-core.

drivers/media/pci/saa7164/saa7164-core.c:55:14: warning: symbol 'fw_debug' was not declared. Should it be static?
drivers/media/pci/saa7164/saa7164-core.c:75:14: warning: symbol 'print_histogram' was not declared. Should it be static?
drivers/media/pci/saa7164/saa7164-core.c:83:14: warning: symbol 'guard_checking' was not declared. Should it be static?
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:1140:30: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:1140:30:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:1140:30:    got void volatile [noderef] <asn:2>*iomem
drivers/media/pci/sta2x11/sta2x11_vip.c:1184:30: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:1184:30:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:1184:30:    got void volatile [noderef] <asn:2>*iomem
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38: warning: incorrect type in argument 1 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:226:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38: warning: incorrect type in argument 2 (different modifiers)
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    expected void [noderef] <asn:2>*<noident>
drivers/media/pci/sta2x11/sta2x11_vip.c:221:38:    got void volatile [noderef] <asn:2>*
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

DVBSky T9580 is a dual tuner card with one DVB-T2/C tuner and one DVB-S2 tuner. It contains the following components:

- PCIe bridge: Conexant CX23885
- Demod for terrestrial/cable: Silicon Labs Si2168-A30
- Tuner for terrestrial/cable: Silicon Labs Si2158-A20
- Demod for sat: Montage DS3103
- Tuner for sat: Montage TS2022

This patch depends on Max Nibble's patch for m88ds3103 (see patchwork 25312: https://patchwork.linuxtv.org/patch/25312/ ).

3 firmwares are needed:
- Si2168-A30 demod and Si2158-A20 tuner: same as TechnoTrend CT2-4400, https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html
- Montage DS3103 demod: same as PCTV 461e, Antti has it on his LinuxTV project page: http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/

IR receiver is not supported.

Values in cx23885_gpio_setup, cx23885_card_setup and dvbsky_t9580_set_voltage as well as the EEPROM read function are taken from the manufacturer provided semi-open source driver. The drivers in question are Linux GPL'd media tree drivers for cx23885 modified by Max Nibble (nibble.max@gmail.com) with proprietary tuner/demod drivers. Max is aware of this patch and has approved my use of the values in this patch.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Setting the LNB voltage requires setting some GPIOs on the cx23885 with some boards before calling the actual set_voltage function in the demod driver. Add a function pointer into state for that case.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Acked-by: NAntti Palosaari <crope@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Prepare cx23885 driver for handling I2C client that is needed for certain demodulators and tuners (for example Si2168 and Si2157). I2C client for tuner and demod stored in state and unregistering of the I2C devices added into dvb_unregister.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/pt3/pt3.c:862:1: warning: symbol 'pt3_pm_ops' was not declared. Should it be static?

Cc: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch adds support for PT3 PCIe cards.
PT3 has an FPGA PCIe bridge chip, a TC90522 demod chip and
a VA4M6JC2103 tuner module which contains two QM1D1C0042 chips for ISDB-S
and two MxL301RF's for ISDB-T.
It can receive and deliver 4 (2x ISDB-S, 2x ISDB-T) streams simultaneously,
and a kthread is used per stream to poll incoming data,
because PT3 does not have interrupts.

As an antenna input for each delivery system is split in the tuner module
and shared between the corresponding two tuner chips,
LNB/LNA controls that the FPGA chip provides are (naturally) shared as well.
The tuner chips also share the power line in the tuner module,
which is controlled on/off by a GPIO pin of the demod chip.

As with the demod chip and the ISDB-T tuner chip,
the init sequences/register settings for those chips are not disclosed
and stored in a private memory of the FPGA,
PT3 driver executes the init of those chips on behalf of their drivers.
Signed-off-by: NAkihiro Tsukada <tskd08@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/saa7134/saa7134-go7007.c: In function ‘saa7134_go7007_interface_reset’:
drivers/media/pci/saa7134/saa7134-go7007.c:147:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>

drivers/media/pci/saa7134/saa7134-go7007.c:247:17: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7134/saa7134-go7007.c:247:17:    expected unsigned int [unsigned] val
drivers/media/pci/saa7134/saa7134-go7007.c:247:17:    got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7134/saa7134-go7007.c:252:17: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7134/saa7134-go7007.c:252:17:    expected unsigned int [unsigned] val
drivers/media/pci/saa7134/saa7134-go7007.c:252:17:    got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7134/saa7134-go7007.c:299:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7134/saa7134-go7007.c:299:9:    expected unsigned int [unsigned] val
drivers/media/pci/saa7134/saa7134-go7007.c:299:9:    got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7134/saa7134-go7007.c:300:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7134/saa7134-go7007.c:300:9:    expected unsigned int [unsigned] val
drivers/media/pci/saa7134/saa7134-go7007.c:300:9:    got restricted __le32 [usertype] <noident>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>