- 20 12月, 2006 5 次提交
-
-
由 Ben Dooks 提交于
Both CONFIG_MACH_OSIRIS and CONFIG_MACH_ANUBIS should select CONFIG_PM_SIMTEC. This patch moves the selection of CONFIG_PM_SIMTEC to the machines that require it, as currently done with other machines in the S3C2410 architecture. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Update the ep93xx, iop13xx, iop32x, iop33x, ixp2000, ixp23xx, lpd270 and onearm defconfigs to 2.6.20-rc1. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Deepak Saxena has agreed to hand xsc3 maintainership over to me. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
LED 3 should have been registered with the platform deviceid of 3, instead of 1 (which was used for LED 1). Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dan Williams 提交于
* use irq_chip * use handle_level_irq Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 12月, 2006 17 次提交
-
-
由 Krzysztof Helt 提交于
The patch adds ifdefs around per cpu definitions. Otherwise, if not all cpu types are selected, the kernel does not link. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
The struct resource 'end' field is inclusive, the iop13xx flash setup code got this wrong. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
The phys_io/io_pg_offst machine record variables were being set to bogus values, causing problems when enabling DEBUG_LL. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Add HWCAP_CRUNCH so that the dynamic linker knows whether it can use Crunch-optimised libraries or not. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix up the CONFIG_PM mixups in arch/arm/mach-s3c2410/Kconfig causing CONFIG_S3C2410_PM and CONFIG_PM_H1940 to get enabled permanently. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Move adjust_cr() into arch/arm/mm/mmu.c, and move irqflags.h to a more appropriate place in the header file. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Clean the includes in arch/arm/mach-s3c2410/s3c2440.c and arch/arm/mach-s3c2410/s3c2442.c which should have been pruned when these where split and updated. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Remove old changelog entries in arch/arm/mach-s3c2410 which should be available from the version control system. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Change the include/asm-arm/arch-s3c2410/regs-serial.h platform data to use the prorper type (upf_t) for the uart_flags. Fix all the other parts of arch/arm/mach-s3c2410 to include <linux/serial_core.h> and all other uses of the include file. mach-rx3715.c:101:18: warning: incorrect type in initializer (different base types) mach-rx3715.c:101:18: expected unsigned long [unsigned] uart_flags mach-rx3715.c:101:18: got restricted unsigned int [usertype] [force] <noident> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Remove warning from s3c2410_pm_resume() not being declared by making it static. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix the following sparse errors in arch/arm/mach-s3c2410 by fixing the include paths and making un-exported items static. s3c2410-clock.c:206:12: warning: symbol 's3c2410_baseclk_add' was not declared. Should it be static? s3c2412-clock.c:559:17: warning: symbol 'clks_src' was not declared. Should it be static? s3c2412-clock.c:622:12: warning: symbol 'clks' was not declared. Should it be static? s3c2412-clock.c:630:12: warning: symbol 's3c2412_baseclk_add' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Remove old (and non-shared) VA addresses from the mappings in arch/arm/mach-s3c2410/map.h and anywhere they are being mapped in arch/arm/mach-s3c2410 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix sparse errors in arch/arm/mach-s3c2410/s3c2442-clock.c warning: symbol 'clk_h' shadows an earlier one warning: symbol 'clk_p' shadows an earlier one warning: symbol 'clk_upll' shadows an earlier one Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix the sparse errors in arch/arm/mach-s3c2410/s3c2440-clock.c warning: symbol 'clk_h' shadows an earlier one warning: symbol 'clk_p' shadows an earlier one warning: symbol 'clk_upll' shadows an earlier one Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix the copyright messages in arch/arm/mach-s3c2410 to actually have `Copyright` in the line. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
We need to ensure that the area size is page aligned so that remap_area_pte() doesn't increment the address past the end of the desired area. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 12月, 2006 5 次提交
-
-
由 Kristoffer Ericson 提交于
* HP Jornada 720 uses epson 1356 chip for graphics. This chip is compatible with s1d13xxxfb driver. * HP Jornada 720 uses a Microprocessor Control Unit to talk to various hardware. We add it as a platform device in jornada720_init() * We provide pm_suspend() to avoid unresolved symbols in apm.o. We are unable to truly suspend now, hence the stub. * Speaker/microphone enabling got removed because it will be placed in the alsa driver. Signed-off-by: Filip Zyzniewski <(address hidden)> Signed-off-by: Kristoffer Ericson <(address hidden)> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Pavel Pisa 提交于
Support to change MX1 CPU frequency at runtime. Tested on PiKRON's PiMX1 board and seems to be fully stable up to 200 MHz end even as low as 8 MHz. Signed-off-by: NPavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Robert P. J. Day 提交于
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Some of the header file rearrangements broke the build for board-osk. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <tony@atomide.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
More fixes to build breakage from the work_struct changes ... this updates the tps65010 driver. Plus, fix some dependencies related to the way it's used on the OMAP OSK: force static linking there, since the resulting kernel can't link. NOTE that until the i2c core gets fixed to work without SMBUS_QUICK, kernels needing this driver must still use "tps65010.force=0,0x48" on the command line. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 12月, 2006 7 次提交
-
-
由 Russell King 提交于
Empty fixup functions are just a waste of code, and are not necessary. Remote them. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Sascha Hauer 提交于
HID drivers are in their own directory now, so we have to include the Kconfig file for arm. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Sascha Hauer 提交于
Add a clocksource driver for netx systems Signed-off-by: NLuotao Fu <lfu@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Sascha Hauer 提交于
Add a clocksource driver for pxa2xx systems Signed-off-by: NLuotao Fu <lfu@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Since we're keeping the ioremap code, we might as well keep it as close to the standard kernel as possible. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
L_PTE_ASID is not really required to be stored in every PTE, since we can identify it via the address passed to set_pte_at(). So, create set_pte_ext() which takes the address of the PTE to set, the Linux PTE value, and the additional CPU PTE bits which aren't encoded in the Linux PTE value. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Robert P. J. Day 提交于
Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 12 12月, 2006 1 次提交
-
-
由 Russell King 提交于
Clean up the KERNEL_RAM_ADDR stuff in arch/arm/kernel/head.S to make it clearer what's referring to what. In doing so, remove the usage of __virt_to_phys(), which is not guaranteed to be something that the assembler can parse. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 11 12月, 2006 2 次提交
-
-
由 Russell King 提交于
Add support for the I2C bus found on the ARM Versatile and Realview platforms. The I2C bus has a RTC and optionally some EEPROMs attached. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Vitaly Wool 提交于
New I2C bus driver for Philips ARM boards (Philips IP3204 I2C IP block). This I2C controller can be found on (at least) PNX010x, PNX52xx and PNX4008 Philips boards. Signed-off-by: NVitaly Wool <vitalywool@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 10 12月, 2006 1 次提交
-
-
由 Russell King 提交于
Later glibc requires the *at syscalls. Add them. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 12月, 2006 2 次提交
-
-
由 David Howells 提交于
This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-