- 21 1月, 2010 8 次提交
-
-
由 Alex Deucher 提交于
most of radeon_legacy_atom_set_surface() is taken care of in atombios_set_base(), so remove the duplicate setup and move the remaining bits (DISP_MERGE setup and FP2 sync) to atombios_crtc.c where they are used. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
Make it call the proper backend depending on the GPU family. Right now r4xx cards with atombios modesetting enabled were using the avivo crtc base code. This also allows us to add support for new asics more easily. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
- add support for inline src params - fix shift_left/shift_right and shl/shr ops shift_* ops use inline src params, shl/r use full params - fix mask op (uses inline params) Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
newer asics have large mmio apertures Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
The first dword of PACKET3_3D_DRAW_IMMD maps to SE_VTX_FMT so the vertex size is part of the draw packet. This patch fixes a possible case where you have a command buffer that does not contain SE_VTX_FMT register write, but does contain PACKET3_3D_DRAW_IMMD. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Andrew Randrianasulu 提交于
Add missing vertex shader regs for r200. fixed fdo bug 26061 agd5f: use official reg names Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Andrew Randrianasulu 提交于
The checks for CUBE and 3D textures were inverted. fixes fdo bug 24159 agd5f: added comments for clarity. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 14 1月, 2010 5 次提交
-
-
由 Jerome Glisse 提交于
Use same common function to disable agp so we replace the GART callback by the proper one when we do so. This fix oops if radeon_agp_init report failure. This patch also move radeon_agp_init out of *_mc_init for r600 & rv770 so that we can have a similar behavior than for previous hw, ie if agp_init fails it will fallback to GPU GART and disable AGP. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
radeon KMS need a GART of at least 32M to properly work. This patch check the AGP aperture size and disable if it's less than 32M. Note than unlike non KMS path we don't staticaly allocate AGP memory so we are not wasting memory not used by graphic processing. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
r600 blit cleanup path need to check if a bo was allocated before trying to free or unpin it. This patch add this check and avoid oops when the initialization on r6xx or r7xx hw fails. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
It's not necessary to unpin buffer in fb destruction. pin/unpin need to be balanced and we don't pin in fb creation. We pin when an fb is associated to a crtc and unpin when the fb is disassociated from the crtc. Note: Maybe we should take reference on fb in set_base callback so fb doesn't disappear until it's unbind from ctrc. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
It appears that attempting AUXCH DDC breaks the subsequent attempt to do DDC over the i2c lines, so use the sink type to determine if we should be doing AUXCH or i2c DDC. This fixes my DVI monitor plugged into DP->DVI convertor. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 13 1月, 2010 5 次提交
-
-
由 Dave Airlie 提交于
Testing GTT ready might be more correct but cp.ready works fine and has been tested on irc by 2-3 ppl. fixes bug k.org 15035 and fd.o 25733 Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Due to heat issues. Fixes fdo bug 25992 v2: fix typo noticed by Maarten Maathuis Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Unhandled vectors can be safely ignored, no need to spam the kernel log by default. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Based on radeonfb code and recent ddx fix. v2: minor formatting fix from Michel Dänzer Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Reviewed-by: NMichel Dänzer <michel@daenzer.net> Tested-by: NMichel Dänzer <michel@daenzer.net> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 11 1月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
- r4xx/rs6xx: add support for extended pixel shader instruction/temp regs - r5xx: add SM3 regs Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 08 1月, 2010 13 次提交
-
-
由 Jerome Glisse 提交于
If for any reason we haven't installed handler we shouldn't try to enable IRQ/MSI on the hw so we don't get unhandled IRQ/MSI which makes the kernel sad. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
In some case vblank might not be initialized and we shouldn't try to use associated function. This patch make sure this is the case. It also export drm_vblank_cleanup so driver can cleanup vblank if for any reason IRQ/MSI is not working. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alexander Beregalov 提交于
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
In some case we weren't releasing the AGP device at module unloading. This leaded to unfunctional AGP at next module load. This patch make sure we release the AGP bus if we acquire it. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
R300 family will hard lockup if host path read cache flush is done through MMIO to HOST_PATH_CNTL. But scheduling same flush through ring seems harmless. This patch remove the hdp_flush callback and add a flush after each fence emission which means a flush after each IB schedule. Thus we should have same behavior without the hard lockup. Tested on R100,R200,R300,R400,R500,R600,R700 family. V2: Adjust fence counts in r600_blit_prepare_copy() Signed-off-by: NJerome Glisse <jglisse@redhat.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Corbin Simpson 提交于
Long story short, this fixes sporadic hardlocks with my rv410 during times of intense 2D acceleration (Flash on Fx3). V2: Fix indentation and move errata_fini to suspend function so we don't leak scratch register over suspend/resume cycle. V3: Move scratch_reg to asic specific structure (aim is to slowly move stuff to asic specific structure and avoid poluting radeon_device struct with asic specific variables) Signed-off-by: NCorbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This detects if the sideport memory is enabled and if it is VRAM is evicted on suspend/resume. This should fix s/r issues on some IGPs. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Darren Jenkins 提交于
There are a couple of array overruns, and some associated confusion in the code. This is just a wild guess at what the code should actually look like. Coverity CID: 13305 13306 agd5f: fix up the original intent of the timing code Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This is displayport used for internal connections such as laptop panels and systems with integrated monitors. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Add a new connector type for eDP (embedded displayport) eDP is more or less the same as DP but there are some cases when you might want to handle it separately. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Makes it easier to keep in sync with ddx and the upstream AMD versions. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Also remove the problematic enums that were unused remnants from the ddx. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 07 1月, 2010 6 次提交
-
-
由 Luca Tettamanti 提交于
The mask happens to be the same, but the IH is reading the status, not the not the control register. Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Darren Jenkins 提交于
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13338 Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Darren Jenkins 提交于
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13335 Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Darren Jenkins 提交于
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13334 Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Darren Jenkins 提交于
The encoder variable can be NULL in this function so I believe it should be checked before dereference. Coverity CID: 13253 [airlied: extremely unlikely to happen] Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jiri Slaby 提交于
Stanse found a memory leak in radeon_master_create. master_priv is not freed/assigned on all paths. Fix that. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 06 1月, 2010 2 次提交
-
-
由 Alex Deucher 提交于
Should fix fdo bug 25741 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Look up primary dac adj values from the table if there is no bios or bios dac table to reference. The lookup table may need to be adjusted for certain families. Should fix kernel bug 14945. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-