Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 11 5月, 2009 4 次提交
    • P
      perf_counter: call atomic64_set for counter->count · 615a3f1e
      由 Paul Mackerras 提交于 
      A compile warning triggered because we are calling
atomic_set(&counter->count). But since counter->count
is an atomic64_t, we have to use atomic64_set.

So the count can be set short, resulting in the reset ioctl
only resetting the low word.

[ Impact: clear counter properly during the reset ioctl ]
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <18951.48285.270311.981806@drongo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      615a3f1e
    • P
      perf_counter: don't count scheduler ticks as context switches · a08b159f
      由 Paul Mackerras 提交于 
      The context-switch software counter gives inflated values at present
because each scheduler tick and each process-wide counter
enable/disable prctl gets counted as a context switch.

This happens because perf_counter_task_tick, perf_counter_task_disable
and perf_counter_task_enable all call perf_counter_task_sched_out,
which calls perf_swcounter_event to record a context switch event.

This fixes it by introducing a variant of perf_counter_task_sched_out
with two underscores in front for internal use within the perf_counter
code, and makes perf_counter_task_{tick,disable,enable} call it.  This
variant doesn't record a context switch event, and takes a struct
perf_counter_context *.  This adds the new variant rather than
changing the behaviour or interface of perf_counter_task_sched_out
because that is called from other code.

[ Impact: fix inflated context-switch event counts ]
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <18951.48034.485580.498953@drongo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a08b159f
    • P
      perf_counter: Put whole group on when enabling group leader · 6751b71e
      由 Paul Mackerras 提交于 
      Currently, if you have a group where the leader is disabled and there
are siblings that are enabled, and then you enable the leader, we only
put the leader on the PMU, and not its enabled siblings.  This is
incorrect, since the enabled group members should be all on or all off
at any given point.

This fixes it by adding a call to group_sched_in in
__perf_counter_enable in the case where we're enabling a group leader.

To avoid the need for a forward declaration this also moves
group_sched_in up before __perf_counter_enable.  The actual content of
group_sched_in is unchanged by this patch.

[ Impact: fix bug in counter enable code ]
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <18951.34946.451546.691693@drongo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6751b71e
    • M
      perf_counter, x86: clean up throttling printk · 88233923
      由 Mike Galbraith 提交于 
      s/PERFMON/perfcounters for perfcounter interrupt throttling warning.

'perfmon' is the CPU feature name that is Intel-only, while we do
throttling in a generic way.

[ Impact: cleanup ]
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      88233923
  3. 10 5月, 2009 1 次提交
  5. 09 5月, 2009 5 次提交
  7. 06 5月, 2009 7 次提交
  9. 05 5月, 2009 5 次提交
    • I
      perf_counter: fix fixed-purpose counter support on v2 Intel-PERFMON · 066d7dea
      由 Ingo Molnar 提交于 
      Fixed-purpose counters stopped working in a simple 'perf stat ls' run:

   <not counted>  cache references
   <not counted>  cache misses

Due to:

  ef7b3e09: perf_counter, x86: remove vendor check in fixed_mode_idx()

Which made x86_pmu.num_counters_fixed matter: if it's nonzero, the
fixed-purpose counters are utilized.

But on v2 perfmon this field is not set (despite there being
fixed-purpose PMCs). So add a quirk to set the number of fixed-purpose
counters to at least three.

[ Impact: add quirk for three fixed-purpose counters on certain Intel CPUs ]

Cc: Robert Richter <robert.richter@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1241002046-8832-28-git-send-email-robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      066d7dea
    • I
      perf_counter: convert perf_resource_mutex to a spinlock · 1dce8d99
      由 Ingo Molnar 提交于 
      Now percpu counters can be initialized very early. But the init
sequence uses mutex_lock(). Fortunately, perf_resource_mutex should
be a spinlock anyway, so convert it.

[ Impact: fix crash due to early init mutex use ]

LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1dce8d99
    • I
      perf_counter: initialize the per-cpu context earlier · 0d905bca
      由 Ingo Molnar 提交于 
      percpu scheduling for perfcounters wants to take the context lock,
but that lock first needs to be initialized. Currently it is an
early_initcall() - but that is too late, the task tick runs much
sooner than that.

Call it explicitly from the scheduler init sequence instead.

[ Impact: fix access-before-init crash ]

LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0d905bca
    • P
      perf_counter: x86: fixup nmi_watchdog vs perf_counter boo-boo · ba77813a
      由 Peter Zijlstra 提交于 
      Invert the atomic_inc_not_zero() test so that we will indeed detect the
first activation.

Also rename the global num_counters, since its easy to confuse with
x86_pmu.num_counters.

[ Impact: fix non-working perfcounters on AMD CPUs, cleanup ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1241455664.7620.4938.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ba77813a
    • I
      perf_counter: round-robin per-CPU counters too · b82914ce
      由 Ingo Molnar 提交于 
      This used to be unstable when we had the rq->lock dependencies,
but now that they are that of the past we can turn on percpu
counter RR too.

[ Impact: handle counter over-commit for per-CPU counters too ]

LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b82914ce
  11. 03 5月, 2009 1 次提交
  13. 02 5月, 2009 4 次提交
  15. 01 5月, 2009 10 次提交
  17. 30 4月, 2009 3 次提交