We will be calling it from transport_complete_cmd, avoid forward
declarations.  No semantic change.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch updates iscsi_login_zero_tsih_s1() usage for generating
iscsi_session->session_index to properly check the return value from
idr_get_new(), and reject the iSCSI login attempt with exception
status ISCSI_LOGIN_STATUS_NO_RESOURCES in the event of a failure.
Signed-off-by: NBenjamin Wang <cpwang2009@gmail.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a long-standing bug with SCSI overflow handling
where se_cmd->data_length was incorrectly being re-assigned to
the larger CDB extracted allocation length, resulting in a number
of fabric level errors that would end up causing a session reset
in most cases.  So instead now:

 - Only re-assign se_cmd->data_length durining UNDERFLOW (to use the
   smaller value)
 - Use existing se_cmd->data_length for OVERFLOW (to use the smaller
   value)

This fix has been tested with the following CDB to generate an
SCSI overflow:

  sg_raw -r512 /dev/sdc 28 0 0 0 0 0 0 0 9 0

Tested using iscsi-target, tcm_qla2xxx, loopback and tcm_vhost fabric
ports.  Here is a bit more detail on each case:

 - iscsi-target: Bug with open-iscsi with overflow, sg_raw returns
                 -3584 bytes of data.
 - tcm_qla2xxx: Working as expected, returnins 512 bytes of data
 - loopback: sg_raw returns CHECK_CONDITION, from overflow rejection
             in transport_generic_map_mem_to_cmd()
 - tcm_vhost: Same as loopback
Reported-by: NRoland Dreier <roland@purestorage.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This was originally for helping fabrics to determine overflow/underflow
status, and has been superceeded by SCF_OVERFLOW_BIT + SCF_UNDERFLOW_BIT.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Use rcu_dereference_protected in order to prevent lockdep
complaint. Sequel of the patch 863555be

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com>
Acked-by: NMark D. Rustad <mark.d.rustad@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Here TRANSPORT_IQN_LEN is 224, which is a multiple of 4.
Since vhost_tpgt is 2 bytes and abi_version is 4, the total size would
be 230.  But gcc needs struct size be aligned to first field size, which
is 4 bytes, so it pads the structure by extra 2 bytes to the total of
232.

This padding is very undesirable in an ABI:
- it can not be initialized easily
- it can not be checked easily
- it can leak information between kernel and userspace

Simplest solution is probably just to make the padding
explicit.

(v2: Add check for zero'ed backend->reserved field for VHOST_SCSI_SET_ENDPOINT
     and VHOST_SCSI_CLEAR_ENDPOINT ops as requested by MST)
Reported-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a regression bug with the handling of zero-length
data CDBs within transport_generic_new_cmd() code.  The bug was introduced
with the following commit as part of the single task conversion work:

  commit 4101f0a8
  Author: Christoph Hellwig <hch@infradead.org>
  Date:   Tue Apr 24 00:25:03 2012 -0400

      target: always allocate a single task

where the zero-length check for SCF_SCSI_DATA_SG_IO_CDB was incorrectly
changed to SCF_SCSI_CONTROL_SG_IO_CDB because of the seperate comment
in transport_generic_new_cmd() wrt to control CDBs zero-length handling
introduced in:

  commit 91ec1d35
  Author: Nicholas Bellinger <nab@linux-iscsi.org>
  Date:   Fri Jan 13 12:01:34 2012 -0800

      target: Add workaround for zero-length control CDB handling

So go ahead and change transport_generic_new_cmd() to handle control+data
zero-length CDBs in the same manner for this special case.

Tested with iscsi-target + loopback fabric port LUNs on 3.6-rc0 code.

This patch will also need to be picked up for 3.5-stable.

(hch: Add proper comment in transport_generic_new_cmd)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a regression bug in pscsi_transport_complete() callback
code where *pt was being NULL dereferenced during REPORT_LUNS handling,
that was introduced with the spc/sbc refactoring in:

commit 1fd032ee
Author: Christoph Hellwig <hch@infradead.org>
Date:   Sun May 20 11:59:15 2012 -0400

    target: move code for CDB emulation

As this is a special case for pscsi_parse_cdb() to call spc_parse_cdb() to
allow TCM to handle REPORT_LUN emulation, pscsi_plugin_task will have not
been allocated..

So now in pscsi_transport_complete() just check for existence of *pt and
return for this special case.
Reported-by: NAlex Elsayed <eternaleye+usenet@gmail.com>
Cc: Alex Elsayed <eternaleye+usenet@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch changes the vhost_scsi_target->vhost_wwpn[] type used
by VHOST_SCSI_* ioctls to 'char *' as requested by Blue Swirl in
order to match the latest QEMU vhost-scsi RFC-v3 userspace code.

Queuing this up into target-pending/master for a -rc3 PULL.
Reported-by: NBlue Swirl <blauwirbel@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

I am hitting this bug when the target is low in memory that fails the
alloc_page() for the newly submitted command. This is a sort of off-by-one
bug causing NULL pointer dereference in __free_page() since 'i' here is
really the counter of total pages that have been successfully allocated here.
Signed-off-by: NYi Zou <yi.zou@intel.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Open-FCoE.org <devel@open-fcoe.org>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Stop doing a pile of work related to debugging messages when
the ft_debug_logging flag is not set. Use unlikely to add the
check in a way that the check can be inlined without inlining the
whole thing.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch contains the post RFC-v5 (post-merge) changes, this includes:

- Add locking comment
- Move vhost_scsi_complete_cmd ahead of TFO callbacks in order to
  drop forward declarations
- Drop extra '!= NULL' usage in vhost_scsi_complete_cmd_work()
- Change vhost_scsi_*_handle_kick() to use pr_debug
- Fix possible race in vhost_scsi_set_endpoint() for vs->vs_tpg checking
  + assignment.
- Convert tv_tpg->tpg_vhost_count + ->tv_tpg_port_count from atomic_t ->
  int, and make sure reference is protected by ->tv_tpg_mutex.
- Drop unnecessary vhost_scsi->vhost_ref_cnt
- Add 'err:' label for exception path in vhost_scsi_clear_endpoint()
- Add enum for VQ numbers, add usage in vhost_scsi_open()
- Add vhost_scsi_flush() + vhost_scsi_flush_vq() following
  drivers/vhost/net.c
- Add smp_wmb() + vhost_scsi_flush() call during vhost_scsi_set_features()
- Drop unnecessary copy_from_user() usage with GET_ABI_VERSION ioctl
- Add missing vhost_scsi_compat_ioctl() caller for vhost_scsi_fops
- Fix function parameter definition first line to follow existing
  vhost code style
- Change 'vHost' usage -> 'vhost' in handful of locations
- Change -EPERM -> -EBUSY usage for two failures in tcm_vhost_drop_nexus()
- Add comment for tcm_vhost_workqueue in tcm_vhost_init()
- Make GET_ABI_VERSION return 'int' + add comment in tcm_vhost.h
Reported-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Zhi Yong Wu <wuzhy@cn.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Fix up a new coccinelle warnings reported by Fengguang Wu + Intel
0-DAY kernel build testing backend:

drivers/vhost/tcm_vhost.c:537:23-29: ERROR: allocation function on line
533 returns NULL not ERR_PTR on failure

vim +537 drivers/vhost/tcm_vhost.c
   534          if (!sg)
   535                  return -ENOMEM;
   536          pr_debug("%s sg %p sgl_count %u is_err %ld\n", __func__,
 > 537                 sg, sgl_count, IS_ERR(sg));
   538          sg_init_table(sg, sgl_count);
   539
   540          tv_cmd->tvc_sgl = sg;
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Following a report of a crash during an automount expire I found that
the locking in fs/autofs4/expire.c:get_next_positive_subdir() was wrong.
Not only is the locking wrong but the function is more complex than it
needs to be.

The function is meant to calculate (and dget) the next entry in the list
of directories contained in the root of an autofs mount point (an autofs
indirect mount to be precise). The main problem was that the d_lock of
the owner of the list was not being taken when walking the list, which
lead to list corruption under load. The only other lock that needs to
be taken is against the next dentry candidate so it can be checked for
usability.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull VFIO fix from Alex Williamson:
 "Just a trivial patch to include vfio.h in the installed headers so we
  can complete userspace integration into QEMU."

* tag 'vfio-for-v3.6-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: Include vfio.h in installed headers

Pull fuse updates from Miklos Szeredi.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: verify all ioctl retry iov elements
  fuse: add missing INIT flag descriptions
  fuse: add missing INIT flags
  fuse: update attributes on aio_read
  fuse: invalidate inode mapping if mtime changes
  fuse: add FUSE_AUTO_INVAL_DATA init flag

Merge tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen fix from Konrad Rzeszutek Wilk:
 "Way back in v3.5 we added a mechanism to populate back pages that were
  released (they overlapped with MMIO regions), but neglected to reserve
  the proper amount of virtual space for extend_brk to work properly.

  Coincidentally some other commit aligned the _brk space to larger area
  so I didn't trigger this until it was run on a machine with more than
  2GB of MMIO space."

 * On machines with large MMIO/PCI E820 spaces we fail to boot b/c
   we failed to pre-allocate large enough virtual space for extend_brk.

* tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back.

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: intc: Handle domain association for sparseirq pre-allocated vectors.
  sh: sh7269: Fix LCD pinmux
  sh: dma: fix request_irq usage

Moved to djbw@fb.com

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: NDan Williams <djbw@fb.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When dumping "Code: " sections from an oops, the trapping instruction
%rip points to can be a string copy

  2b:*  f3 a5                   rep movsl %ds:(%rsi),%es:(%rdi)

and the line contain a bunch of ":".  Current "cut" selects only the and
the second field output looks funnily overlaid this:

  2b:*  f3 a5                   rep movsl %ds     <-- trapping instruction:(%rsi),%es:(%rdi

Fix this by selecting the remaining fields too.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull two slave-dmaengine fixes from Vinod Koul:
 "One fixes the correct use of clock API in imx driver and the other
  enables clock for tegra driver, which is used for other tegra driver
  conversion to dmanegine in -next."

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: tegra: enable/disable dma clock
  dma: imx-dma: Fix kernel crash due to missing clock conversion

Pull more drm fixes from Dave Airlie:
 "Just some intel and nouveau ones this time, intel has more edp panel
  fixes for macbooks and nouveau has a suspend/resume regression fix in
  there."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Apply post-sync write for pipe control invalidates
  drm/i915: reorder edp disabling to fix ivb MacBook Air
  drm/nv86/fifo: suspend fix
  drm/nouveau: disable copy engine on NVAF
  nouveau: fixup scanout enable in nvc0_pm
  drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry
  drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate
  drm/i915: ensure i2c adapter is all set before adding it
  drm/i915: ignore eDP bpc settings from vbt
  drm/i915: Fix blank panel at reopening lid
  drm/nve0/fifo: add support for the flip completion swmthd

Pull two sparc fixes from David S. Miller.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Be less verbose during vmemmap population.
  sparc64: do not clobber personality flags in sys_sparc64_personality()

* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6:
  drm/nv86/fifo: suspend fix
  drm/nouveau: disable copy engine on NVAF
  nouveau: fixup scanout enable in nvc0_pm
  drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry
  drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate
  drm/nve0/fifo: add support for the flip completion swmthd

Daniel Vetter writes:

"A few important fixers:
- fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai)
- make the retina mbp work (ignore bogus edp bpc value in vbt)
- fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula)
- fix an edp panel power sequence regression, fixes the new macbook air
- apply the tlb invalidate w/a

Otherwise we still have another gmbus regression (patches are awaiting
tested-bys) and there's something odd going with some rare systems not
entering rc6 often enough (and hence blowing through too much power).  It
seems to be a timing-related issue and can be mitigated by frobbing the
magic tuning parameters. We're still working on that one. Also, we still
have some fallout from the hw context support, but you can only hit that
with mesa master."

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Apply post-sync write for pipe control invalidates
  drm/i915: reorder edp disabling to fix ivb MacBook Air
  drm/i915: ensure i2c adapter is all set before adding it
  drm/i915: ignore eDP bpc settings from vbt
  drm/i915: Fix blank panel at reopening lid

On a 2-node machine with 256GB of ram we get 512 lines of
console output, which is just too much.

This mimicks Yinghai Lu's x86 commit c2b91e2e
(x86_64/mm: check and print vmemmap allocation continuous) except that
we aren't ever going to get contiguous block pointers in between calls
so just print when the virtual address or node changes.

This decreases the output by an order of 16.

Also demote this to KERN_DEBUG.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When invalidating the TLBs it is documentated as requiring a post-sync
write. Failure to do so seems to result in a GPU hang.

Exposure to this hang on IVB seems to be a result of removing the extra
stalls required for SNB pipecontrol workarounds:

commit 6c6cf5aa
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jul 20 18:02:28 2012 +0100

    drm/i915: Only apply the SNB pipe control w/a to gen6

Note: Manually switch the pipe_control cmd to 4 dwords to avoid a
(silent) functional conflict with -next. This way will get a loud (but
conflict with next (since the scratch_addr has been deleted there).

Reported-and-tested-by: yex.tian@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: added note about merge conflict with -next.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

eDP is tons of fun. It turns out that at least the new MacBook Air 5,1
model absolutely doesn't like the new force vdd dance we've introduced
in

commit 6cb49835
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun May 20 17:14:50 2012 +0200

    drm/i915: enable vdd when switching off the eDP panel

But that patch also tried to fix some neat edp sequence issue with the
force_vdd timings. Closer inspection reveals that we've raised
force_vdd only to do the aux channel communication dp_sink_dpms. If we
move the edp_panel_off below that, we don't need any force_vdd for the
disable sequence, which makes the Air happy.

Unfortunately the reporter of the original bug that the above commit
fixed is travelling, so we can't test whether this regresses things.
But my theory is that since we don't check for any power-off ->
force_vdd-on delays in edp_panel_vdd_on, this was the actual
root-cause of this failure. With that force_vdd dance completely
eliminated, I'm hopeful the original bug stays fixed, too.

For reference the old bug, which hopefully doesn't get broken by this:

https://bugzilla.kernel.org/show_bug.cgi?id=43163

In any case, regression fixers win over plain bugfixes, so this needs
to go in asap.

v2: The crucial pieces seems to be to clear the force_vdd flag
uncoditionally, too, in edp_panel_off. Looks like this is left behind
by the firmware somehow.

v3: The Apple firmware seems to switch off the panel on it's own, hence
we still need to keep force_vdd on, but properly clear it when switching
the panel off.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671Tested-by: NRoberto Romer <sildurin@gmail.com>
Tested-by: NDaniel Wagner <wagi@monom.org>
Tested-by: NKeith Packard <keithp@keithp.com>
Cc: stable@vger.kernel.org
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pull s390 patches from Martin Schwidefsky:
 "Included are bug fixes and a patch to enable system call filtering
  with BPF."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/compat: fix mmap compat system calls
  s390/compat: fix compat wrappers for process_vm system calls
  s390: do not clobber personality flags in sys_32_personality()
  s390/seccomp: add support for system call filtering using BPF
  s390/sclp_sdias: Add missing break and "fall through"
  s390/mm: remove MAX_PHYSADDR_BITS define

Pull drm fixes from Dave Airlie:
 "Radeon and intel fixes mostly, one fix to the mgag200 driver to not
  hang on certain server variants."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits)
  drm/radeon: fix typo in function header comment
  drm/radeon/kms: implement timestamp userspace query (v2)
  drm/radeon/kms: add MSAA texture support for r600-evergreen
  drm/radeon/kms: reorder code in r600_check_texture_resource
  drm/radeon: fence virtual address and free it once idle v4
  drm/radeon: fix some missing parens in asic macros
  drm/radeon: add some new SI pci ids
  drm/radeon: fix ordering in pll picking on dce4+
  drm/radeon: do not reenable crtc after moving vram start address
  drm/radeon: fix bank tiling parameters on cayman
  drm/radeon: fix bank tiling parameters on evergreen
  drm/radeon: fix bank tiling parameters on SI
  drm/radeon: properly handle crtc powergating
  drm/radeon: properly handle SS overrides on TN (v2)
  drm/radeon/dce4+: set a more reasonable cursor watermark
  drm/radeon: fix handling for ddc type 5 on combios
  drm/mgag200: fix G200ER pll picking algorithm
  drm/edid: Fix potential memory leak in edid_load()
  drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/radeon/kms: allow "invalid" DB formats as a means to disable DB
  ...

Commit 72121572 ("GPIO: gpio-pxa: fix devicetree functions") added an
"xlate" function pointer to the irq_domain_ops, but this function is nor
declared or defined anywhere when CONFIG_OF is disabled, causing the
build error:

  drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function)

Extending the DT-only code section to cover the irq_domain_ops and the
pxa_gpio_dt_ids solves this problem and makes it clearer which code is
actually used without DT.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fix is a backport from the reworked nouveau driver.  It masks off the
engines we're not expecting to use before attempting a channel kickoff.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The copy engine exhibits random memory corruption in at least one case, the
GeForce 320M (nv50, 0xaf) in the MacBookAir3,1.

This patch omits creating the engine for the specific chipset, falling back
to M2MF, which kills the symptoms.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes screen being black after changing performance level.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: stable@vger.kernel.org [3.5+]
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

At least partially fixes DP output detection on W530.  Not sure if more
issues remain, or if my adaptor is just behaving weirdly (it does that
sometimes).

In any case, this patch is necessary.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NChristoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Alex Deucher writes:
This is the current set of radeon fixes for 3.6.  Nothing too major.

Highlights:
- various display fixes
- some SI fixes
- new SI pci ids
- major VM fix
- CS checker support for MSAA

I've tested on a number of cards across generations and noticed no problems.

* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix typo in function header comment
  drm/radeon/kms: implement timestamp userspace query (v2)
  drm/radeon/kms: add MSAA texture support for r600-evergreen
  drm/radeon/kms: reorder code in r600_check_texture_resource
  drm/radeon: fence virtual address and free it once idle v4
  drm/radeon: fix some missing parens in asic macros
  drm/radeon: add some new SI pci ids
  drm/radeon: fix ordering in pll picking on dce4+
  drm/radeon: do not reenable crtc after moving vram start address
  drm/radeon: fix bank tiling parameters on cayman
  drm/radeon: fix bank tiling parameters on evergreen
  drm/radeon: fix bank tiling parameters on SI
  drm/radeon: properly handle crtc powergating
  drm/radeon: properly handle SS overrides on TN (v2)
  drm/radeon/dce4+: set a more reasonable cursor watermark
  drm/radeon: fix handling for ddc type 5 on combios

i2c_add_adapter() may do i2c transfers on the bus to detect supported
devices. Therefore the adapter needs to be all set before adding it. This
was not the case for the bit-banging fallback, resulting in an oops if the
device detection GMBUS transfers timed out. Fix the issue by calling
i2c_add_adapter() only after intel_gpio_setup().

LKML-Reference: <5021F00B.7000503@ionic.de>
Tested-by: NMihai Moldovan <ionic@ionic.de>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDmitrii Cherkasov <DCherkasov@luxsoft.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>