Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit d006199e72a9 ("serial: sh-sci: Regtype probing doesn't need to be
fatal.") made sci_init_single() return when sci_probe_regmap() succeeds,
although it should return when sci_probe_regmap() fails.  This causes
systems using the serial sh-sci driver to crash during boot.

Fix the problem by using the right return condition.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Computers have become a lot faster since we compromised on the
partial MD4 hash which we use currently for performance reasons.

MD5 is a much safer choice, and is inline with both RFC1948 and
other ISS generators (OpenBSD, Solaris, etc.)

Furthermore, only having 24-bits of the sequence number be truly
unpredictable is a very serious limitation.  So the periodic
regeneration and 8-bit counter have been removed.  We compute and
use a full 32-bit sequence number.

For ipv6, DCCP was found to use a 32-bit truncated initial sequence
number (it needs 43-bits) and that is fixed here as well.
Reported-by: NDan Kaminsky <dan@doxpara.com>
Tested-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Two additional savage4 variants were added, but the S3_SAVAGE4_SERIES
macro was incompletely modified, resulting in a false positive detection
of a savage4 card regardless of which savage card is actually present.

For non-savage4 series cards, such as a Savage/IX-MV card, this results
in garbled video and/or a hard-hang at boot time.  Fix this by changing
an '||' to an '&&' in the S3_SAVAGE4_SERIES macro.
Signed-off-by: NJohn P. Stanley <jpsinthemix@verizon.net>
Reviewed-by: NTormod Volden <debian.tormod@gmail.com>
[ The macros have incomplete parenthesis too, but whatever ..  -Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 9c921c22
Author: Lan Tianyu <tianyu.lan@intel.com>

    ACPI / Battery: Resolve the race condition in the sysfs_remove_battery()

fixed BUG https://bugzilla.kernel.org/show_bug.cgi?id=35642 , but as a side
effect made lockdep unhappy with sysfs_remove_battery():

[14818.477168]
[14818.477170] =======================================================
[14818.477200] [ INFO: possible circular locking dependency detected ]
[14818.477221] 3.1.0-dbg-07865-g1280ea8-dirty #668
[14818.477236] -------------------------------------------------------
[14818.477257] s2ram/1599 is trying to acquire lock:
[14818.477276]  (s_active#8){++++.+}, at: [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a
[14818.477323]
[14818.477325] but task is already holding lock:
[14818.477350]  (&battery->lock){+.+.+.}, at: [<ffffffffa0047278>] sysfs_remove_battery+0x10/0x4b [battery]
[14818.477395]
[14818.477397] which lock already depends on the new lock.
[14818.477399]
[..]
[14818.479121] stack backtrace:
[14818.479148] Pid: 1599, comm: s2ram Not tainted 3.1.0-dbg-07865-g1280ea8-dirty #668
[14818.479175] Call Trace:
[14818.479198]  [<ffffffff814828c3>] print_circular_bug+0x293/0x2a4
[14818.479228]  [<ffffffff81070cb5>] __lock_acquire+0xfe4/0x164b
[14818.479260]  [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a
[14818.479288]  [<ffffffff810718d2>] lock_acquire+0x138/0x1ac
[14818.479316]  [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a
[14818.479345]  [<ffffffff81168a79>] sysfs_deactivate+0x9b/0xec
[14818.479373]  [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a
[14818.479405]  [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a
[14818.479433]  [<ffffffff81167bc5>] sysfs_hash_and_remove+0x54/0x77
[14818.479461]  [<ffffffff811681b9>] sysfs_remove_file+0x12/0x14
[14818.479488]  [<ffffffff81385bf8>] device_remove_file+0x12/0x14
[14818.479516]  [<ffffffff81386504>] device_del+0x119/0x17c
[14818.479542]  [<ffffffff81386575>] device_unregister+0xe/0x1a
[14818.479570]  [<ffffffff813c6ef9>] power_supply_unregister+0x23/0x27
[14818.479601]  [<ffffffffa004729c>] sysfs_remove_battery+0x34/0x4b [battery]
[14818.479632]  [<ffffffffa004778f>] battery_notify+0x2c/0x3a [battery]
[14818.479662]  [<ffffffff8148fe82>] notifier_call_chain+0x74/0xa1
[14818.479692]  [<ffffffff810624b4>] __blocking_notifier_call_chain+0x6c/0x89
[14818.479722]  [<ffffffff810624e0>] blocking_notifier_call_chain+0xf/0x11
[14818.479751]  [<ffffffff8107e40e>] pm_notifier_call_chain+0x15/0x27
[14818.479770]  [<ffffffff8107ee1a>] enter_state+0xa7/0xd5
[14818.479782]  [<ffffffff8107e341>] state_store+0xaa/0xc0
[14818.479795]  [<ffffffff8107e297>] ? pm_async_store+0x45/0x45
[14818.479807]  [<ffffffff81248837>] kobj_attr_store+0x17/0x19
[14818.479820]  [<ffffffff81167e27>] sysfs_write_file+0x103/0x13f
[14818.479834]  [<ffffffff81109037>] vfs_write+0xad/0x13d
[14818.479847]  [<ffffffff811092b2>] sys_write+0x45/0x6c
[14818.479860]  [<ffffffff81492f92>] system_call_fastpath+0x16/0x1b

This patch introduces separate lock to struct acpi_battery to
grab in sysfs_remove_battery() instead of battery->lock.
So fix by Lan Tianyu is still there, we just grab independent lock.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Currently the use of pm_runtime_put_sync() is not safe from
interrupts-disabled context because rpm_idle() will release the
spinlock and enable interrupts for the idle callbacks.  This enables
interrupts during a time where interrupts were expected to be
disabled, and can have strange side effects on drivers that expected
interrupts to be disabled.

This is not a bug since the documentation clearly states that only
_put_sync_suspend() is safe in IRQ-safe mode.

However, pm_runtime_put_sync() could be made safe when in IRQ-safe
mode by releasing the spinlock but not re-enabling interrupts, which
is what this patch aims to do.

Problem was found when using some buggy drivers that set
pm_runtime_irq_safe() and used _put_sync() in interrupts-disabled
context.
Reported-by: NColin Cross <ccross@google.com>
Tested-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The local variable ret is defined twice in pm_genpd_poweron(), which
causes this function to always return 0, even if the PM domain's
.power_on() callback fails, in which case an error code should be
returned.

Remove the wrong second definition of ret and additionally remove an
unnecessary definition of wait from pm_genpd_poweron().
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The AMW0 function in acer-wmi works on Lenovo ideapad S205 for control
the wifi hardware state. We also found there have a 0x78 EC register
exposes the state of wifi hardware switch on the machine.

So, add this patch to support Lenovo ideapad S205 wifi hardware switch
in acer-wmi driver.

Reference: bko#37892
	https://bugzilla.kernel.org/show_bug.cgi?id=37892

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Tested-by: NFlorian Heyer <heyho@flanto.de>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

It seems that aliases shouldn't contain spaces, as
module-init-tools uses them as delimeters in module.alias file
Signed-off-by: NAnton V. Boyarshinov <boyarsh@altlinux.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

In the case of ideapad_backlight_init() failure,
we need to free the resources allocated by ideapad_input_init().

Aslo drop __devexit annotation for ideapad_input_exit() because
we also call it in ideapad_acpi_add() error path.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

When enabling turbo, we need to set both the TDC and TDP bits.  IIRC
only the TDC one actually matters, but fix it up anyway since the
current code is confusing.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Some samsung latop of the N150/N2{10,20,30} serie are badly detected by the samsung-laptop platform driver, see bug # 36082.
It appears that N230 identifies itself as N150/N210/N220/N230 whereas the other identify themselves as N150/N210/220.
This patch attemtp fix #36082 allowing correct identification for all the said netbook model.
Reported-by: NDaniel Eklöf <daniel@ekloef.se>
Signed-off-by: NThomas Courbon <thcourbon@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

All of these keys are being reported on the keyboard
controller but are also generating WMI events. Add them
to the legacy keymap to silence the noise.

BugLink: http://bugs.launchpad.net/bugs/815914Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

We only care about if there is any successful match from the dmi table
or no match at all, we can make dmi_check_system return immediately if
we have a successful match instead of iterate thorough the whole table.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This adds backlight control on the Samsung Q10 laptop, which does not support
the SABI interface. Also tested successfully on the Dell Latitude X200.
Signed-off-by: NFrederick van der Wyck <fvanderwyck@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

And also remove unused variable 'my_id_table'.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Otherwise, the error path will always be executed.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The memory for td_info which is allocated in initialize_sensor()
should be properly kfreed in mid_thermal_probe() error patch and
mid_thermal_remove().
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The N510 benefits from this code as well. Below is a patch to include support.
Signed-off-by: NJouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

ref: http://dev.iksaif.net/projects/3/wiki/Asus-laptop_WAPFSigned-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Cc: stable@kernel.org
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Based on a patch from Nate Weibley. <nweibley@gmail.com>.

Cc: Nate Weibley <nweibley@gmail.com>
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The T101MT Home/Express Gate key autorepeats in hardware, but
sparse-keymap does not support hardware autorepeat. Enable the
input core's software autorepeat to emulate the hardware behavior.
Normal hotkeys are autoreleased, so the behavior of these keys
will not be affected.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This key is different than other hotkeys, having seperate scan
codes for press, release, and hold, so it requires some special
filtering. Press and release events are passed on, and hold events
are ignored since sparse-keymap does not support hardware
autorepeat.

Note that "Home" in the context of this button doesn't mean the
same thing as the usual Home key, and it really isn't clear at
all what is meant by "Home". The manufacurer's description of the
button indicates that it should launch some sort of touch screen
settings interface on short press and apply a desktop rotation on
long press.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This is required for the T101MT home key, which behaves differently
than other hotkeys.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The code was completly broken, and should never had been sent
to the kernel. That's what happens when you write code without
hardware to test it.

Cc: stable@kernel.org
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

When acpi_backlight=vendor in cmdline or no backlight support in acpi video
device, ideapad-laptop will register backlight device and control brightness
and backlight power via the command in VPC2004.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Create /sys/devices/platform/ideapad/cfg for showing cfg value.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>