Following the suggestions from Andrew Morton and Stephen Rothwell,
Dont expand the ARCH list in kernel/gcov/Kconfig. Instead,
define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures
can enable.

set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was
previously allowed + ARM64 which I tested.
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are a number of situations where the mandatory barriers rmb() and
wmb() are used to order memory/memory operations in the device drivers
and those barriers are much heavier than they actually need to be.  For
example in the case of PowerPC wmb() calls the heavy-weight sync
instruction when for coherent memory operations all that is really needed
is an lsync or eieio instruction.

This commit adds a coherent only version of the mandatory memory barriers
rmb() and wmb().  In most cases this should result in the barrier being the
same as the SMP barriers for the SMP case, however in some cases we use a
barrier that is somewhere in between rmb() and smp_rmb().  For example on
ARM the rmb barriers break down as follows:

  Barrier   Call     Explanation
  --------- -------- ----------------------------------
  rmb()     dsb()    Data synchronization barrier - system
  dma_rmb() dmb(osh) data memory barrier - outer sharable
  smp_rmb() dmb(ish) data memory barrier - inner sharable

These new barriers are not as safe as the standard rmb() and wmb().
Specifically they do not guarantee ordering between coherent and incoherent
memories.  The primary use case for these would be to enforce ordering of
reads and writes when accessing coherent memory that is shared between the
CPU and a device.

It may also be noted that there is no dma_mb().  Most architectures don't
provide a good mechanism for performing a coherent only full barrier without
resorting to the same mechanism used in mb().  As such there isn't much to
be gained in trying to define such a function.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Miller <davem@davemloft.net>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As a small zero page, huge zero page should not be accounted in smaps
report as normal page.

For small pages we rely on vm_normal_page() to filter out zero page, but
vm_normal_page() is not designed to handle pmds.  We only get here due
hackish cast pmd to pte in smaps_pte_range() -- pte and pmd format is not
necessary compatible on each and every architecture.

Let's add separate codepath to handle pmds.  follow_trans_huge_pmd() will
detect huge zero page for us.

We would need pmd_dirty() helper to do this properly.  The patch adds it
to THP-enabled architectures which don't yet have one.

[akpm@linux-foundation.org: use do_div to fix 32-bit build]
Signed-off-by: N"Kirill A. Shutemov" <kirill@shutemov.name>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Tested-by: NFengwei Yin <yfw.kernel@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As there are now no remaining users of arch_fast_hash(), lets kill
it entirely.

This basically reverts commit 71ae8aac ("lib: introduce arch
optimized hash library") and follow-up work, that is f.e., commit
23721754 ("lib: hash: follow-up fixups for arch hash"),
commit e3fec2f7 ("lib: Add missing arch generic-y entries for
asm-generic/hash.h") and last but not least commit 6a02652d
("perf tools: Fix include for non x86 architectures").

Cc: Francesco Fusco <fusco@ntop.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 3690951f
(arm64: Use swiotlb late initialisation)
switches the DMA mapping code to swiotlb_tlb_late_init_with_default_size(),
the arm64_swiotlb_init() will not used anymore, so remove this function.
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This is a bug fix for using physical arch timers when
the arch_timer_use_virtual boolean is false.  It restores the
arch_counter_get_cntpct() function after removal in

0d651e4e "clocksource: arch_timer: use virtual counters"

We need this on certain ARMv7 systems which are architected like this:

* The firmware doesn't know and doesn't care about hypervisor mode and
  we don't want to add the complexity of hypervisor there.

* The firmware isn't involved in SMP bringup or resume.

* The ARCH timer come up with an uninitialized offset between the
  virtual and physical counters.  Each core gets a different random
  offset.

* The device boots in "Secure SVC" mode.

* Nothing has touched the reset value of CNTHCTL.PL1PCEN or
  CNTHCTL.PL1PCTEN (both default to 1 at reset)

One example of such as system is RK3288 where it is much simpler to
use the physical counter since there's nobody managing the offset and
each time a core goes down and comes back up it will get reinitialized
to some other random value.

Fixes: 0d651e4e ("clocksource: arch_timer: use virtual counters")
Cc: stable@vger.kernel.org
Signed-off-by: NSonny Rao <sonnyrao@chromium.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Since PCIe is using SMMUv1 which only supports 15-bit stream ID,
only 7-bit PCI bus id is used to specify stream ID. Therefore,
we only limit the PCI bus range to 0x7f.
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge xen/mm32.c into xen/mm.c.
As a consequence the code gets compiled on arm64 too.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>

dev_addr is the machine address of the page.

The new parameter can be used by the ARM and ARM64 implementations of
xen_dma_map_page to find out if the page is a local page (pfn == mfn) or
a foreign page (pfn != mfn).

dev_addr could be retrieved again from the physical address, using
pfn_to_mfn, but it requires accessing an rbtree. Since we already have
the dev_addr in our hands at the call site there is no need to get the
mfn twice.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Introduce a boolean flag and an accessor function to check whether a
device is dma_coherent. Set the flag from set_arch_dma_coherent_ops.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>

Currently the kernel patches all necessary instructions once at boot
time, so modules are not covered by this.
Change the apply_alternatives() function to take a beginning and an
end pointer and introduce a new variant (apply_alternatives_all()) to
cover the existing use case for the static kernel image section.
Add a module_finalize() function to arm64 to check for an
alternatives section in a module and patch only the instructions from
that specific area.
Since that module code is not touched before the module
initialization has ended, we don't need to halt the machine before
doing the patching in the module's code.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

If the overflow threshold for a counter is set above or near the
0xffffffff boundary then the kernel may lose track of the overflow
causing only events that occur *after* the overflow to be recorded.
Specifically the problem occurs when the value of the performance counter
overtakes its original programmed value due to wrap around.

Typical solutions to this problem are either to avoid programming in
values likely to be overtaken or to treat the overflow bit as the 33rd
bit of the counter.

Its somewhat fiddly to refactor the code to correctly handle the 33rd bit
during irqsave sections (context switches for example) so instead we take
the simpler approach of avoiding values likely to be overtaken.

We set the limit to half of max_period because this matches the limit
imposed in __hw_perf_event_init(). This causes a doubling of the interrupt
rate for large threshold values, however even with a very fast counter
ticking at 4GHz the interrupt rate would only be ~1Hz.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

If I include asm/irq.h on the top of my code, and set ARCH=arm64,
I'll get a compile warning, details are below:
warning: ‘struct pt_regs’
declared inside parameter list [enabled by default]

This patch is suggested by Arnd, see:
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/308270.htmlSigned-off-by: NChunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Building arm64.allmodconfig leads to the following warning:

usb/gadget/function/f_ncm.c:203:0: warning: "NCAPS" redefined
 #define NCAPS (USB_CDC_NCM_NCAP_ETH_FILTER | USB_CDC_NCM_NCAP_CRC_MODE)
 ^
In file included from /home/build/work/batch/arch/arm64/include/asm/io.h:32:0,
                 from /home/build/work/batch/include/linux/clocksource.h:19,
                 from /home/build/work/batch/include/clocksource/arm_arch_timer.h:19,
                 from /home/build/work/batch/arch/arm64/include/asm/arch_timer.h:27,
                 from /home/build/work/batch/arch/arm64/include/asm/timex.h:19,
                 from /home/build/work/batch/include/linux/timex.h:65,
                 from /home/build/work/batch/include/linux/sched.h:19,
                 from /home/build/work/batch/arch/arm64/include/asm/compat.h:25,
                 from /home/build/work/batch/arch/arm64/include/asm/stat.h:23,
                 from /home/build/work/batch/include/linux/stat.h:5,
                 from /home/build/work/batch/include/linux/module.h:10,
                 from /home/build/work/batch/drivers/usb/gadget/function/f_ncm.c:19:
arch/arm64/include/asm/cpufeature.h:27:0: note: this is the location of the previous definition
 #define NCAPS     2

So add a ARM64 prefix to avoid such problem.
Reported-by: NOlof's autobuilder <build@lixom.net>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Earlier implementation assumed last instruction is BPF_EXIT.
Since this is no longer a restriction in eBPF, we remove this
limitation.

Per Alexei Starovoitov [1]:
> classic BPF has a restriction that last insn is always BPF_RET.
> eBPF doesn't have BPF_RET instruction and this restriction.
> It has BPF_EXIT insn which can appear anywhere in the program
> one or more times and it doesn't have to be last insn.

[1] https://lkml.org/lkml/2014/11/27/2

Fixes: e54bcde3 ("arm64: eBPF JIT compiler")
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NZi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

As putting data which is read mostly together, we can avoid
unnecessary cache line bouncing.

Other architectures, such as ARM and x86, adopted the same idea.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NJungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Update handling of cacheflush syscall with changes made in arch/arm
counterpart:
 - return error to userspace when flushing syscall fails
 - split user cache-flushing into interruptible chunks
 - don't bother rounding to nearest vma
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
[will: changed internal return value from -EINTR to 0 to match arch/arm/]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The Cortex-A5x TRM states in paragraph "9.2 Generic Timer functional
description" that generic timers provide an active-LOW interrupt
output. Fix the device trees to correctly describe this.

While doing this update the CPU mask to match the number of described
CPUs as well.
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Initial revision of device tree for AMD Seattle Development platform.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: NThomas Lendacky <Thomas.Lendacky@amd.com>
Signed-off-by: NJoel Schopp <Joel.Schopp@amd.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

secure_computing() is called first in syscall_trace_enter() so that
a system call will be aborted quickly without doing succeeding syscall
tracing if seccomp rules want to deny that system call.

On compat task, syscall numbers for system calls allowed in seccomp mode 1
are different from those on normal tasks, and so _NR_seccomp_xxx_32's need
to be redefined.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

SIGSYS is primarily used in secure computing to notify tracer of syscall
events. This patch allows signal handler on compat task to get correct
information with SA_SIGINFO specified when this signal is delivered.
Reviewed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch allows compat task to issue seccomp() system call.
Reviewed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

If tracer modifies a syscall number to -1, this traced system call should
be skipped with a return value specified in x0.
This patch implements this semantics.

Please note:
* syscall entry tracing and syscall exit tracing (ftrace tracepoint and
  audit) are always executed, if enabled, even when skipping a system call
  (that is, -1).
  In this way, we can avoid a potential bug where audit_syscall_entry()
  might be called without audit_syscall_exit() at the previous system call
  being called, that would cause OOPs in audit_syscall_entry().
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
[will: fixed up conflict with blr rework]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This regeset is intended to be used to get and set a system call number
while tracing.
There was some discussion about possible approaches to do so:

(1) modify x8 register with ptrace(PTRACE_SETREGSET) indirectly,
    and update regs->syscallno later on in syscall_trace_enter(), or
(2) define a dedicated regset for this purpose as on s390, or
(3) support ptrace(PTRACE_SET_SYSCALL) as on arch/arm

Thinking of the fact that user_pt_regs doesn't expose 'syscallno' to
tracer as well as that secure_computing() expects a changed syscall number,
especially case of -1, to be visible before this function returns in
syscall_trace_enter(), (1) doesn't work well.
We will take (2) since it looks much cleaner.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The head.text section is intended to be run at early bootup
before any of the regular kernel mappings have been setup.
Parts of head.text may be freed back into the buddy allocator
due to TEXT_OFFSET so for security requirements this memory
must not be executable. The suspend/resume/hotplug code path
requires some of these head.S functions to run however which
means they need to be executable. Support these conflicting
requirements by moving the few head.text functions that need
to be executable to the text section which has the appropriate
page table permissions.
Tested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

In the arm64 arch_static_branch implementation we place an A64 NOP into
the instruction stream and log relevant details to a jump_entry in a
__jump_table section. Later this may be replaced with an immediate
branch without link to the code for the unlikely case.

At init time, the core calls arch_jump_label_transform_static to
initialise the NOPs. On x86 this involves inserting the optimal NOP for
a given microarchitecture, but on arm64 we only use the architectural
NOP, and hence replace each NOP with the exact same NOP. This is
somewhat pointless.

Additionally, at module load time we don't call jump_label_apply_nops to
patch the optimal NOPs in, unlike other architectures, but get away with
this because we only use the architectural NOP anyway. A later notifier
will patch NOPs with branches as required.

Similarly to x86 commit 11570da1 (x86/jump-label: Do not bother
updating NOPs if they are correct), we can avoid patching NOPs with
identical NOPs. Given that we only use a single NOP encoding, this means
we can NOP-out the body of arch_jump_label_transform_static entirely. As
the default __weak arch_jump_label_transform_static implementation
performs a patch, we must use an empty function to achieve this.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

In a similar manner to arm, it's useful to be able to dump the page
tables to verify permissions and memory types. Add a debugfs file
to check the page tables.
Acked-by: NSteve Capper <steve.capper@linaro.org>
Tested-by: NSteve Capper <steve.capper@linaro.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
[will: s/BUFFERABLE/NORMAL-NC/]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

ARM GICv2m specification extends GICv2 to support MSI(-X) with
a new register frame. This allows a GICv2 based system to support
MSI with minimal changes.
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
[maz: converted the driver to use stacked irq domains,
      updated changelog]
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1416941243-7181-2-git-send-email-marc.zyngier@arm.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>

Get the show on the road...
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1416839720-18400-13-git-send-email-marc.zyngier@arm.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>

In order to support CONFIG_GENERIC_MSI_IRQ_DOMAIN, we need to
define msi_alloc_info_t. As the generic version exposed in
asm-generic/msi.h is perfectly convenient, import this file
as asm/msi.h.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1416839720-18400-2-git-send-email-marc.zyngier@arm.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>

When running on a system with a GICv3, we currenly don't allow the guest
to access the system register interface of the GICv3.  We do this by
clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to
ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_
registers to cause an undefined exception in the guest.

However, we currently don't handle the trap of guest accesses to
ICC_SRE_EL1 and will spill out a warning.  The trap just needs to handle
the access as RAZ/WI, and a guest that tries to prod this register and
set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already
does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE
was not set.

Add the simple trap handler in the sorted table of the system registers.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
[ardb: added cp15 handling]
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Every other architecture with permanent fixed addresses has
FIX_HOLE as the first entry. This seems to be designed as a
debugging aid but there are a couple of side effects of not
having FIX_HOLE:

- If the first fixed address is 0, fix_to_virt -> virt_to_fix
triggers a BUG_ON for the virtual address being equal to
FIXADDR_TOP
- fix_to_virt may return a value outside of FIXADDR_START
and FIXADDR_TOP which may look like a bug to a developer.

Match up with other architectures and make everything clearer
by adding FIX_HOLE.
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Rather than duplicate the ARM_AMBA Kconfig symbol in both 32-bit and
64-bit ARM architectures, move the common definition to drivers/amba
where dependent drivers will be located.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Consistently use the plural form for alternatives pr_fmt strings.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

.exit.* sections may be subject to patching by the new alternatives
framework and so shouldn't be discarded at link-time. Without this patch,
such a section will result in the following linker error:

`.exit.text' referenced in section `.altinstructions' of
 drivers/built-in.o: defined in discarded section `.exit.text' of
drivers/built-in.o
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The fixmap API was originally added for arm64 for
early_ioremap purposes. It can be used for other purposes too
so move the initialization from ioremap to somewhere more
generic. This makes it obvious where the fixmap is being set
up and allows for a cleaner implementation of __set_fixmap.
Reviewed-by: NKees Cook <keescook@chromium.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The function cpu_resume currently lives in the .data section.
There's no reason for it to be there since we can use relative
instructions without a problem. Move a few cpu_resume data
structures out of the assembly file so the .data annotation
can be dropped completely and cpu_resume ends up in the read
only text section.
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NKees Cook <keescook@chromium.org>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The hyp stub vectors are currently loaded using adr. This
instruction has a +/- 1MB range for the loading address. If
the alignment for sections is changed the address may be more
than 1MB away, resulting in reclocation errors. Switch to using
adrp for getting the address to ensure we aren't affected by the
location of the __hyp_stub_vectors.
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

handle_arch_irq isn't actually text, it's just a function pointer.
It doesn't need to be stored in the text section and doing so
causes problesm if we ever want to make the kernel text read only.
Declare handle_arch_irq as a proper function pointer stored in
the data section.
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

While we currently expect self-hosted debug support to be identical
across CPUs, we don't currently sanity check this.

This patch adds logging of the ID_AA64DFR{0,1}_EL1 values and associated
sanity checking code.

It's not clear to me whether we need to check PMUVer, TraceVer, and
DebugVer, as we don't currently rely on these fields at all.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>