The pcm_class sysfs of each PCM substream gives only "none" since the
recent code change to embed the struct device.  Fix the code to point
directly to the embedded device object properly.

Fixes: ef46c7af ('ALSA: pcm: Embed struct device')
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: A couple more updates for v4.2

These were sitting on my laptop.

ASoC: Further updates for v4.2

There's a bunch of additional updates and fixes that came in since my
orignal pull request here, including DT support for rt5645 and fairly
large serieses of cleanups and improvements to tas2552 and rcar.

# gpg: Signature made Mon 22 Jun 2015 10:24:48 BST using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Updates for v4.2

The big thing this release has been Liam's addition of topology support
to the core.  We've also seen quite a bit of driver work and the
continuation of Lars' refactoring for component support.

 - Support for loading ASoC topology maps from firmware, intended to be
   used to allow self-describing DSP firmware images to be built which
   can map controls added by the DSP to userspace without the kernel
   needing to know about individual DSP firmwares.
 - Lots of refactoring to avoid direct access to snd_soc_codec where
   it's not needed supporting future refactoring.
 - Big refactoring and cleanup serieses for the Wolfson ADSP and TI
   TAS2552 drivers.
 - Support for TI TAS571x power amplifiers.
 - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs.
 - Support for x86 systems with RT5650 and Qualcomm Storm.

# gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus

Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus

Merge tag 'asoc-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Further updates for v4.2

There's a bunch of additional updates and fixes that came in since my
orignal pull request here, including DT support for rt5645 and fairly
large serieses of cleanups and improvements to tas2552 and rcar.

Merge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rcar', 'asoc/topic/rt286' and 'asoc/topic/rt5640' into asoc-next

Merge remote-tracking branches 'asoc/topic/mediatek', 'asoc/topic/ml26124' and 'asoc/topic/omap' into asoc-next

ASoC: Updates for v4.2

The big thing this release has been Liam's addition of topology support
to the core.  We've also seen quite a bit of driver work and the
continuation of Lars' refactoring for component support.

 - Support for loading ASoC topology maps from firmware, intended to be
   used to allow self-describing DSP firmware images to be built which
   can map controls added by the DSP to userspace without the kernel
   needing to know about individual DSP firmwares.
 - Lots of refactoring to avoid direct access to snd_soc_codec where
   it's not needed supporting future refactoring.
 - Big refactoring and cleanup serieses for the Wolfson ADSP and TI
   TAS2552 drivers.
 - Support for TI TAS571x power amplifiers.
 - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs.
 - Support for x86 systems with RT5650 and Qualcomm Storm.

# gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus

Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus

Signed-off-by: NMatt Ranostay <mranostay@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The rate controls are codec-specific, it's not possible to
generically say what the range or the meaning of each control
is (or even if they exist at all) - that depends on the
particular codec.

This is currently being handled for Arizona codecs by putting
an Arizona-specific table of controls inside the wm_adsp driver.
This creates a dependency between wm_adsp and arizona.c, and is an
awkward solution if the ADSP is used in another family of codecs

Fix this by moving the Arizona-specific rate controls into the
Arizona codec drivers.
Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Merge branches 'topic/adsp' and 'topic/dapm' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona

Fix trivial typo.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

A typical io ops use simple io accessors which can be common for most
drivers, so provide a default ops which will be used if driver doesn't
provide one
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In HDA extended bus the HDA link objects are created when multilink
capabilities are parsed. We need a routine which free up these link objects
for a bus. So add snd_hdac_link_free_all routine
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDAC extended core should create streams for an extended bus and also free
up those on cleanup. So introduce snd_hdac_ext_stream_init_all and
snd_hdac_stream_free_all routines
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

'04700027("ASoC: rsrc-card: cleanup for DPCM")'
cleanuped rsrc-card driver, but then, unused ret was left.
Below warning happen without this patch

${LINUX}/sound/soc/sh/rcar/rsrc-card.c: In function 'rsrc_card_startup':
${LINUX}/sound/soc/sh/rcar/rsrc-card.c:78:6: warning: unused variable \
	'ret' [-Wunused-variable]
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Since this is common option for HDA driver to specfiy pre-allocated
buffer, we should make this option availble to all HDA driver by
moving this to HDA core
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is the DPCM based machine driver with rt5650 and rt5676
Signed-off-by: NNicolas Boichat <drinkcat@chromium.org>
Signed-off-by: NKoro Chen <koro.chen@mediatek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This is the DPCM based machine driver with MAX98090
Signed-off-by: NKoro Chen <koro.chen@mediatek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This is the DPCM based platform driver of AFE (Audio Front End) unit.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NKoro Chen <koro.chen@mediatek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many path
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. rsnd_mod_to_io() is no longer needed. Let's remove it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship.
This patch checks module working status via io instead of mod
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>