- 26 3月, 2008 1 次提交
-
-
由 David S. Miller 提交于
Move them further from the main kernel image area to facilitate larger kernel sizes. Adjust comments to match. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2008 1 次提交
-
-
由 David S. Miller 提交于
Doing a 'flushw' every stack trace capture creates so much overhead that it makes lockdep next to unusable. We only care about the frame pointer chain and the function caller program counters, so flush those by hand to the stack frame. This is significantly more efficient than a 'flushw' because: 1) We only save 16 bytes per active register window to the stack. 2) This doesn't push the entire register window context of the current call chain out of the cpu, forcing register window fill traps as we return back down. Note that we can't use 'restore' and 'save' instructions to move around the register windows because that wouldn't work on Niagara processors. They optimize 'save' into a new register window by simply clearing out the registers instead of pulling them in from the on-chip register window backing store. Based upon a report by Tom Callaway. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2008 2 次提交
-
-
由 Roland McGrath 提交于
The PT_DTRACE flag is meaningless and obsolete. Don't touch it. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2008 1 次提交
-
-
由 David S. Miller 提交于
Currently kernel images are limited to 8MB in size, and this causes problems especially when enabling features that take up a lot of kernel image space such as lockdep. The code now will align the kernel image size up to 4MB and map that many locked TLB entries. So, the only practical limitation is the number of available locked TLB entries which is 16 on Cheetah and 64 on pre-Cheetah sparc64 cpus. Niagara cpus don't actually have hw locked TLB entry support. Rather, the hypervisor transparently provides support for "locked" TLB entries since it runs with physical addressing and does the initial TLB miss processing. Fully utilizing this change requires some help from SILO, a patch for which will be submitted to the maintainer. Essentially, SILO will only currently map up to 8MB for the kernel image and that needs to be increased. Note that neither this patch nor the SILO bits will help with network booting. The openfirmware code will only map up to a certain amount of kernel image during a network boot and there isn't much we can to about that other than to implemented a layered network booting facility. Solaris has this, and calls it "wanboot" and we may implement something similar at some point. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2008 1 次提交
-
-
由 David S. Miller 提交于
4096 will not fit into the immediate field of a compare instruction, in fact it will end up being -4096 causing the check to fail every time and thus disabling backoff. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2008 3 次提交
-
-
由 David S. Miller 提交于
Reported by Adrian Bunk. Just like in changeset a3f99858 ("[SPARC64]: Move kernel unaligned trap handlers into assembler file.") we have to move the assembler bits into a seperate asm file because as far as the compiler is concerned these inline bits we're doing in unaligned.c are unreachable. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 2月, 2008 3 次提交
-
-
由 David S. Miller 提交于
Kill off some sparse warnings. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Caught by sparse. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Because of the new futex validation init handler, we have to accept faults in init section text as well as the normal kernel text. Thanks to Tom Callaway for the bug report. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 2月, 2008 1 次提交
-
-
由 David S. Miller 提交于
Some parts of the kernel now do things like do *_user() accesses while set_fs(KERNEL_DS) that fault on purpose. See, for example, the code added by changeset a0c1e907 ("futex: runtime enable pi and robust functionality"). That trips up the ASI sanity checking we make in do_kernel_fault(). Just remove it for now. Maybe we can add it back later with an added conditional which looks at the current get_fs() value. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2008 11 次提交
-
-
由 Sam Ravnborg 提交于
Fix following warnings: WARNING: vmlinux.o(.text+0x4f980): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem() WARNING: vmlinux.o(.text+0x4f9cc): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem() alloc_bootmem() is only used during early init and for any subsequent call to kernel_map_range() the program logic avoid the call. So annotate kernel_map_range() with __ref to tell modpost to ignore the reference to a __init function. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Fix following warnings: WARNING: vmlinux.o(.text+0x4b258): Section mismatch in reference from the function dr_cpu_data() to the function .devinit.text:mdesc_fill_in_cpu_data() WARNING: vmlinux.o(.text+0x4b290): Section mismatch in reference from the function dr_cpu_data() to the function .cpuinit.text:cpu_up() mdesc_fill_in_cpu_data() is only used during early init and for cpu hotplug so the __cpuinit annotation is the correct choice. We have the call chain: dr_cpu_data() => dr_cpu_configure() => mdesc_fill_in_cpu_data() dr_cpu_data() is used only during early init and for cpu hotplug. So annotating them all __cpuinit solves the section mismatch and should be correct. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
CC [M] arch/sparc/kernel/led.o arch/sparc/kernel/led.c: In function 'led_blink': arch/sparc/kernel/led.c:35: error: invalid use of undefined type 'struct timer_list' arch/sparc/kernel/led.c:35: error: 'jiffies' undeclared (first use in this function) arch/sparc/kernel/led.c:35: error: (Each undeclared identifier is reported only once arch/sparc/kernel/led.c:35: error: for each function it appears in.) arch/sparc/kernel/led.c:36: error: 'avenrun' undeclared (first use in this function) arch/sparc/kernel/led.c:36: error: 'FSHIFT' undeclared (first use in this function) arch/sparc/kernel/led.c:36: error: 'HZ' undeclared (first use in this function) arch/sparc/kernel/led.c:37: error: invalid use of undefined type 'struct timer_list' arch/sparc/kernel/led.c:39: error: invalid use of undefined type 'struct timer_list' arch/sparc/kernel/led.c:40: error: invalid use of undefined type 'struct timer_list' arch/sparc/kernel/led.c:42: error: implicit declaration of function 'add_timer' arch/sparc/kernel/led.c: In function 'led_write_proc': arch/sparc/kernel/led.c:70: error: implicit declaration of function 'copy_from_user' arch/sparc/kernel/led.c:84: error: implicit declaration of function 'del_timer_sync' arch/sparc/kernel/led.c: In function 'led_init': arch/sparc/kernel/led.c:109: error: implicit declaration of function 'init_timer' arch/sparc/kernel/led.c:110: error: invalid use of undefined type 'struct timer_list' make[1]: *** [arch/sparc/kernel/led.o] Error 1 Based upon original patch by Robert Reif. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Gaston, Jason D 提交于
Add the Intel ICH10 SMBus Controller DeviceID's and updates Tolapai support. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
Don't require platform code to be #ifdeffed according to whether I2C is enabled or not ... if it's not enabled, let GCC compile out all I2C device declarations. (Issue noted on an NSLU2 build that didn't configure I2C.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Christian Krafft 提交于
When probing i2c-pca-isa writes to legacy ioports, which crashes the kernel if there is no device at that port. This patch adds a check_legacy_ioport call, so probe fails gracefully and thus prevents the oops. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Manuel Lauss 提交于
Commit 8b798c4d broke alchemy build, fix it. Pointed out by Adrian Bunk. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
While working on the PCA9564-platform driver, I sometimes had a glimpse at the pxa-driver. I found some suspicious places, and this patch contains my suggestions. Note: They are not tested, due to no hardware. [JD: Some more fixes.] Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NMike Rapoport <mike@compulab.co.il> Tested-by: NEric Miao <ymiao3@marvell.com>
-
由 Jean Delvare 提交于
Each call to i2c_get_adapter() must be followed by a call to i2c_put_adapter() to release the grabbed reference. Otherwise the reference count grows forever and the adapter can never be unregistered. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NVladimir Ananiev <vovan888@gmail.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
- 24 2月, 2008 16 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-core: fix kernel-doc warning sata_fsl: fix build with ATA_VERBOSE_DEBUG [libata] ahci: AMD SB700/SB800 SATA support 64bit DMA libata-pmp: clear hob for pmp register accesses libata: automatically use DMADIR if drive/bridge requires it power_state: get rid of write-only variable in SATA pata_atiixp: Use 255 sector limit
-
由 Randy Dunlap 提交于
Fix libata-core kernel-doc warning: Warning(linux-2.6.25-rc2-git6//drivers/ata/libata-core.c:168): No description found for parameter 'ap' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Anton Vorontsov 提交于
This patch fixes build and few warnings when ATA_VERBOSE_DEBUG is defined: CC drivers/ata/sata_fsl.o drivers/ata/sata_fsl.c: In function ‘sata_fsl_fill_sg’: drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 3 has type ‘void *’ drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 4 has type ‘struct prde *’ drivers/ata/sata_fsl.c: In function ‘sata_fsl_qc_issue’: drivers/ata/sata_fsl.c:459: error: ‘csr_base’ undeclared (first use in this function) drivers/ata/sata_fsl.c:459: error: (Each undeclared identifier is reported only once drivers/ata/sata_fsl.c:459: error: for each function it appears in.) drivers/ata/sata_fsl.c: In function ‘sata_fsl_freeze’: drivers/ata/sata_fsl.c:525: error: ‘csr_base’ undeclared (first use in this function) make[2]: *** [drivers/ata/sata_fsl.o] Error 1 Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Shane Huang 提交于
SB700 SATA controller can support 64 bit DMA, the previous commit badc2341 was added with careless reference to SB600, which should be modified by this patch. Signed-off-by: NShane Huang <shane.huang@amd.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mark Lord 提交于
>> Mark Lord wrote: >>> Tejun, I've added PMP to sata_mv, and am now trying to get it >>> to work with a Marvell PM attached. > >>> And the behaviour I see is very bizarre. >>> After hard+soft resets, the PM signature is found, >>> and libata interrogates the PM registers. >>> >>> It successfully reads register 0, and then register 1. >>> But all subsequent registers read out (incorrectly) as zeros. ... This behavior has been confirmed by Marvell with a SATA analyzer. The Marvell port-multiplier apparently likes to see clean HOB information when accessing PMP registers. Since sata_mv uses PIO shadow register access, this doesn't happen automatically, as it might in a more purely FIS-based driver (eg. ahci). One way to fix this is to flag these commands with ATA_TFLAG_LBA48, forcing libata to write out the HOB fields with known (zero) values. Signed-off-by: NSaeed Bishara <saeed@marvell.com> Acked-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Pavel Machek 提交于
power_state is scheduled for removal, and libata uses it in write-only mode. Remove it. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
AHCI needs sorting too but this deals with the old interface Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) [NETFILTER]: fix ebtable targets return [IP_TUNNEL]: Don't limit the number of tunnels with generic name explicitly. [NET]: Restore sanity wrt. print_mac(). [NEIGH]: Fix race between neighbor lookup and table's hash_rnd update. [RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK tg3: ethtool phys_id default [BNX2]: Update version to 1.7.4. [BNX2]: Disable parallel detect on an HP blade. [BNX2]: More 5706S link down workaround. ssb: Fix support for PCI devices behind a SSB->PCI bridge zd1211rw: fix sparse warnings rtl818x: fix sparse warnings ssb: Fix pcicore cardbus mode ssb: Make the GPIO API reentrancy safe ssb: Fix the GPIO API ssb: Fix watchdog access for devices without a chipcommon ssb: Fix serial console on new bcm47xx devices ath5k: Fix build warnings on some 64-bit platforms. WDEV, ath5k, don't return int from bool function WDEV: ath5k, fix lock imbalance ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: make IOMMU code respect the segment boundary limits [SPARC64]: Fix cpu trampoline et al. mismatch warnings. [SPARC64]: More sparse warning fixes in process.c [SPARC64]: Fix sparse warning wrt. fault_in_user_windows. [SPARC64]: Kill show_regs32(). [SPARC64]: Fix sparse warnings wrt. __show_regs(). [SPARC64]: Kill show_stackframe{,32}(). [SPARC64]: Fix sparse warnings wrt. machine_alt_power_off().
-
由 Mirco Tischler 提交于
This fixes the following compile error caused by commit 3a2d5b70 ("PM: Introduce PM_EVENT_HIBERNATE callback state") CC [M] drivers/usb/host/u132-hcd.o drivers/usb/host/u132-hcd.c: In function ‘u132_suspend’: drivers/usb/host/u132-hcd.c:3224: error: expected expression before ‘int’ drivers/usb/host/u132-hcd.c:3225: error: ‘ports’ undeclared (first use in this function) ... Signed-off-by: NMirco Tischler <mt-ml@gmx.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonwoo Park 提交于
The function ebt_do_table doesn't take NF_DROP as a verdict from the targets. Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Use the added dev_alloc_name() call to create tunnel device name, rather than iterate in a hand-made loop with an artificial limit. Thanks Patrick for noticing this. [ The way this works is, when the device is actually registered, the generic code noticed the '%' in the name and invokes dev_alloc_name() to fully resolve the name. -DaveM ] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
MAC_FMT had only one user and we tried to get rid of that, but this created more problems than it solved. As a result, this reverts three commits: 235365f3 ("net/8021q/vlan_dev.c: Use print_mac."), fea5fa87 ("[NET]: Remove MAC_FMT"), and 8f789c48 ("[NET]: Elminate spurious print_mac() calls.") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The neigh_hash_grow() may update the tbl->hash_rnd value, which is used in all tbl->hash callbacks to calculate the hashval. Two lookup routines may race with this, since they call the ->hash callback without the tbl->lock held. Since the hash_rnd is changed with this lock write-locked moving the calls to ->hash under this lock read-locked closes this gap. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
RTM_NEWLINK allows for already existing links to be modified. For this purpose do_setlink() is called which expects address attributes with a payload length of at least dev->addr_len. This patch adds the necessary validation for the RTM_NEWLINK case. The address length for links to be created is not checked for now as the actual attribute length is used when copying the address to the netdevice structure. It might make sense to report an error if less than addr_len bytes are provided but enforcing this might break drivers trying to be smart with not transmitting all zero addresses. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-