There are various uses of powers of 1000, plus the odd BILLION constant in the
time code.  However, there are perfectly good definitions of *SEC_PER_*SEC in
linux/time.h which can be used instaed.

These are replaced directly in kernel code.  Userspace code imports those
constants as UM_*SEC_PER_*SEC and uses these.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that ITIMER_REAL is no longer used, there is no need for any use of
SIGALRM whatsoever.  This patch removes all mention of it.

In addition, real_alarm_handler took a signal argument which is now always
SIGVTALRM.  So, that is gone.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Enable tickless support.

CONFIG_TICK_ONESHOT and CONFIG_NO_HZ are enabled.

itimer_clockevent gets CLOCK_EVT_FEAT_ONESHOT and an implementation of
.set_next_event.

CONFIG_UML_REAL_TIME_CLOCK goes away because it only makes sense when there is
a clock ticking away all the time.  timer_handler now just calls do_IRQ once
without trying to figure out how many ticks to emulate.

The idle loop now needs to turn ticking on and off.

Userspace ticks keep happening as usual.  However, the userspace loop keep
track of when the next wakeup should happen and suppresses process ticks until
that happens.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

set_interval took a timer type as an argument, but it always specified a
virtual timer.  So, it is not needed, and it is gone, and set_interval is
simplified appropriately.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Eliminate hz() since its only purpose was to provide a kernel-space constant
to userspace code.  This can be done instead by providing the constant
directly through kernel_constants.h.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A number of files that were changed in the recent removal of tt mode
are userspace files which call the os_* wrappers instead of calling
libc directly.  A few other files were affected by this, through

This patch makes these call glibc directly.

There are also style fixes in the affected areas.

os_print_error has no remaining callers, so it is deleted.

There is a interface change to os_set_exec_close, eliminating a
parameter which was always the same.  The callers are fixed as well.

os_process_pc got its error path cleaned up.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Before the removal of tt mode, access to a register on the skas-mode side of a
pt_regs struct looked like pt_regs.regs.skas.regs.regs[FOO].  This was bad
enough, but it became pt_regs.regs.regs.regs[FOO] with the removal of the
union from the middle.  To get rid of the run of three "regs", the last field
is renamed to "gp".
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Eliminate some uses of __u64 in the physical memory support.  It's hard to get
a definition of __u64 in both kernel and userspace code on x86_64, so this
changes them to unsigned long long.

There are also a copyright update and formatting comment removal from the
affected header.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Formatting changes in the files which have been changed in the course
of folding foo_skas functions into their callers.  These include:
	copyright updates
	header file trimming
	style fixes
	adding severity to printks

These changes should be entirely non-functional.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch makes a number of simplifications enabled by the removal of
CHOOSE_MODE.  There were lots of functions that looked like

	int foo(args){
		foo_skas(args);
	}

The bodies of foo_skas are now folded into foo, and their declarations (and
sometimes entire header files) are deleted.

In addition, the union uml_pt_regs, which was a union between the tt and skas
register formats, is now a struct, with the tt-mode arm of the union being
removed.

It turns out that usr2_handler was unused, so it is gone.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Throw out a lot of code dealing with saving and restoring floating-point
state.  In skas mode, where processes run in a restoring floating-point state
on kernel entry and exit is pointless.

This eliminates most of arch/um/os-Linux/sys-{i386,x86_64}/registers.c.  Most
of what remained is now arch-indpendent, and can be moved up to
arch/um/os-Linux/registers.c.  Both arches need the jmp_buf accessor
get_thread_reg, and i386 needs {save,restore}_fp_regs because it cheats during
sigreturn by getting the fp state using ptrace rather than copying it out of
the process sigcontext.

After this, it turns out that arch/um/include/skas/mode-skas.h is almost
completely unneeded.  The declarations in it are variables which either don't
exist or which don't have global scope.  The one exception is
kill_off_processes_skas.  If that's removed, this header can be deleted.

This uncovered a bug in user.h, which wasn't correctly making sure that a
size_t definition was available to both userspace and kernelspace files.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cleanup of the SIGWINCH support.

Some code and comment reformatting.

The stack used for SIGWINCH threads was leaked.  This is now fixed by storing
it with the pid and other information, and freeing it when the thread is
killed.

If something goes wrong with a WIGWINCH thread, and this is discovered in the
interrupt handler, the winch record would leak.  It is now freed, except that
the IRQ isn't freed.  This is hard to do from interrupt context.  This has the
side-effect that the IRQ system maintains a reference to the freed structure,
but that shouldn't cause a problem since the descriptor is disabled.

register_winch_irq is now much better about cleaning up after an
initialization failure.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Distros seem to be removing PAGE_SIZE from asm/page.h.  So, the libc side of
UML should stop using it.

I replace it with UM_KERN_PAGE_SIZE, which is defined to be the same as
PAGE_SIZE on the kernel side of the house.  I could also use getpagesize(),
but it's more important that UML have the same value of PAGE_SIZE everywhere.
It's conceivable that it could be built with a larger PAGE_SIZE, and use of
getpagesize() would break that badly.

PAGE_MASK got the same treatment, as it is closely tied to PAGE_SIZE.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some tidying of the irq code before introducing irq stacks.  Mostly
style fixes, but the timer handler calls the timer code directly
rather than going through the generic sig_handler_common_skas.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we have UM_THREAD_SIZE, we can replace the calculations in
user-space code (an earlier patch took care of the kernel side of the
house).
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These haven't been fixed for ages.  Just make comments out of them.

arch/um/kernel/skas/process.c:181:2: warning: #warning Need to look up
+userspace_pid by cpu
arch/um/kernel/skas/process.c:187:2: warning: #warning Need to look up
+userspace_pid by cpu
arch/um/kernel/skas/process.c:194:2: warning: #warning need to loop over
+userspace_pids in kill_off_processes_skas
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

More trimming of the page fault path.

Permissions are passed around in a single int rather than one bit per
int.  The permission values are copied from libc so that they can be
passed to mmap and mprotect without any further conversion.

The register sets used by do_syscall_stub and copy_context_skas0 are
initialized once, at boot time, rather than once per call.

wait_stub_done checks whether it is getting the signals it expects by
comparing the wait status to a mask containing bits for the signals of
interest rather than comparing individually to the signal numbers.  It
also has one check for a wait failure instead of two.  The caller is
expected to do the initial continue of the stub.  This gets rid of an
argument and some logic.  The fname argument is gone, as that can be
had from a stack trace.

user_signal() is collapsed into userspace() as it is basically one or
two lines of code afterwards.

The physical memory remapping stuff is gone, as it is unused.

flush_tlb_page is inlined.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Code running on the initial UML stack can't receive or process signals since
current must be valid when IRQs are handled, and there is no current for this
stack.

So, instead of using UML_LONGJMP and UML_SETJMP, which are careful to save and
restore signal state, and, as a side-effect, handle any deferred signals,
start_idle_thread must use the bare equivalents, which don't do anything with
signals.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch converts calls in the os layer to os_{read,write}_file to calls
directly to libc read() and write() where it is clear that the I/O buffer is
in the kernel.

We can do that here instead of calling os_{read,write}_file_k since we are in
libc code and can call libc directly.

With the change in the calls, error handling needs to be changed to refer to
errno directly rather than the return value of the call.

CATCH_EINTR wrappers were also added where needed.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch lays some groundwork for the next one, which converts calls to
os_{read,write}_file into {read,write}, by doing some tidying in the affected
areas.

do_not_aio gets restructured to make the final result a bit cleaner.

There are also whitespace and other formatting fixes, fixes in error messages,
and a typo fix.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide a register dump if handle_trap fails.  Abstract out ptrace_dump_regs
since it now has two callers.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

userspace code used to have to call the kernelspace function page_size() in
order to determine the value of the kernel's PAGE_SIZE.  Since this is now
available directly from kern_constants.h as UM_KERN_PAGE_SIZE, page_size() can
be deleted and calls changed to use the constant.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

user_util.h isn't needed any more, so delete it and remove all includes of it.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch uses MAX_REG_NR consistently to refer to the register file size.
 FRAME_SIZE isn't sufficient because on x86_64, it is smaller than the
ptrace register file size.  MAX_REG_NR was introduced as a consistent way
to get the number of registers, but wasn't used everywhere it should be.

When this causes a problem, it makes PTRACE_SETREGS fail on x86_64 because
of a corrupted segment register value in the known-good register file.  The
patch also adds a register dump at that point in case there are any future
problems here.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a debugging message in the case that mapping a stub fails.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to get the __NR_* constants, we need sys/syscall.h.
linux/unistd.h works as well since it includes syscall.h, however syscall.h
is more parsimonious.  We were inconsistent in this, and this patch adds
syscall.h includes where necessary and removes linux/unistd.h includes
where they are not needed.

asm/unistd.h also includes the __NR_* constants, but these are not the
glibc-sanctioned ones, so this also removes one such inclusion.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

fork on UML has always somewhat subtle.  The underlying cause has been the
need to initialize a stack for the new process.  The only portable way to
initialize a new stack is to set it as the alternate signal stack and take a
signal.  The signal handler does whatever initialization is needed and jumps
back to the original stack, where the fork processing is finished.  The basic
context switching mechanism is a jmp_buf for each process.  You switch to a
new process by longjmping to its jmp_buf.

Now that UML has its own implementation of setjmp and longjmp, and I can poke
around inside a jmp_buf without fear that libc will change the structure, a
much simpler mechanism is possible.  The jmpbuf can simply be initialized by
hand.

This eliminates -
	the need to set up and remove the alternate signal stack
	sending and handling a signal
	the signal blocking needed around the stack switching, since
there is no stack switching
	setting up the jmp_buf needed to jump back to the original
stack after the new one is set up

In addition, since jmp_buf is now defined by UML, and not by libc, it can be
embedded in the thread struct.  This makes it unnecessary to have it exist on
the stack, where it used to be.  It also simplifies interfaces, since the
switch jmp_buf used to be a void * inside the thread struct, and functions
which took it as an argument needed to define a jmp_buf variable and assign it
from the void *.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

set_interval returns an error instead of panicing if setitimer fails.  Some of
its callers now check the return.

enable_timer is largely tt-mode-specific, so it is marked as such, and the
only skas-mode caller is made to call set-interval instead.

user_time_init was a no-value-added wrapper around set_interval, so it is
gone.

Since set_interval is now called from kernel code, callers no longer pass
ITIMER_* to it.  Instead, they pass a flag which is converted into ITIMER_REAL
or ITIMER_VIRTUAL.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Have most signals go through an arch-provided handler which recovers the
sigcontext and then calls a generic handler.  This replaces the
ARCH_GET_SIGCONTEXT macro, which was somewhat fragile.  On x86_64, recovering
%rdx (which holds the sigcontext pointer) must be the first thing that
happens.  sig_handler duly invokes that first, but there is no guarantee that
I can see that instructions won't be reordered such that %rdx is used before
that.  Having the arch provide the handler seems much more robust.

Some signals in some parts of UML require their own handlers - these places
don't call set_handler any more.  They call sigaction or signal themselves.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds an implementation of setjmp and longjmp to UML, allowing
access to the inside of a jmpbuf without needing the access macros formerly
provided by libc.

The implementation is stolen from klibc.  I copy the relevant files into
arch/um.  I have another patch which avoids the copying, but requires klibc be
in the tree.

setjmp and longjmp users required some tweaking.  Includes of <setjmp.h> were
removed and includes of the UML longjmp.h were added where necessary.  There
are also replacements of siglongjmp with UML_LONGJMP which I somehow missed
earlier.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The UML_SETJMP macro was requiring its users to pass in a argument which it
could supply itself, since it wasn't used outside that invocation of the
macro.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It turns out that init_new_thread_signals is always called with altstack == 1,
so we can eliminate the parameter.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Blairsorblade noticed some confusion between our use of a system
call's return value and errno.  This patch fixes a number of related
bugs -
	using errno instead of a return value
	using a return value instead of errno
	forgetting to negate a error return to get a positive error code
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up the jmpbuf code.  Since softints, we no longer use sig_setjmp, so
the UML_SIGSETJMP wrapper now has a misleading name.  Also, I forgot to
change the buffers from sigjmp_buf to jmp_buf.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that GCC warns about format errors, fix them.  Nothing able to cause a
crash, however.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We weren't making sure that we initialized the FP registers of new processes
to sane values.

This patch also moves some defines in the affected area closer to where they
are used.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch implements soft interrupts.  Interrupt enabling and disabling no
longer map to sigprocmask.  Rather, a flag is set indicating whether
interrupts may be handled.  If a signal comes in and interrupts are marked as
OK, then it is handled normally.  If interrupts are marked as off, then the
signal handler simply returns after noting that a signal needs handling.  When
interrupts are enabled later on, this pending signals flag is checked, and the
IRQ handlers are called at that point.

The point of this is to reduce the cost of local_irq_save et al, since they
are very much more common than the signals that they are enabling and
disabling.  Soft interrupts produce a speed-up of ~25% on a kernel build.

Subtleties -

    UML uses sigsetjmp/siglongjmp to switch contexts.  sigsetjmp has been
    wrapped in a save_flags-like macro which remembers the interrupt state at
    setjmp time, and restores it when it is longjmp-ed back to.

    The enable_signals function has to loop because the IRQ handler
    disables interrupts before returning.  enable_signals has to return with
    signals enabled, and signals may come in between the disabling and the
    return to enable_signals.  So, it loops for as long as there are pending
    signals, ensuring that signals are enabled when it finally returns, and
    that there are no pending signals that need to be dealt with.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Stop using global variables to hold the file descriptor and offset used to map
the skas0 stubs.  Instead, calculate them using the page physical addresses.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel/skas dir).

This moves all systemcalls from skas/process.c file under os-Linux dir and
join skas/process.c and skas/process_kern.c files.
Signed-off-by: NGennady Sharapov <gennady.v.sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel dir).

This moves all systemcalls from time.c file under os-Linux dir and joins
time.c and tine_kernel.c files
Signed-off-by: NGennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>