- 05 11月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
This also moves setup_cpu_maps to setup-common.c (calling it smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 04 11月, 2005 3 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Michael Ellerman 提交于
The merged verison of ELF_CORE_COPY_REGS is basically the PPC64 version, with a memset that came from PPC and a few types abstracted out into #defines. But it's not _quite_ right. The first problem is we calculate the number of registers with: nregs = sizeof(struct pt_regs) / sizeof(ELF_GREG_TYPE) For a 32-bit process on a 64-bit kernel that's bogus because the registers are 64 bits, but ELF_GREG_TYPE is u32, so nregs == 88 which is wrong. The other problem is the memset, which assumes a struct pt_regs is smaller than a struct elf_regs. For a 32-bit process on a 64-bit kernel that's false. The fix is to calculate the number of regs using sizeof(unsigned long), which should always be right, and just memset the whole damn thing _before_ copying the registers in. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
- 03 11月, 2005 9 次提交
-
-
由 Michael Ellerman 提交于
There's a few places already, and soon will be more, where we synthesise branch instructions at runtime. Rather than doing it by hand in each case, it would make sense to have one implementation. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 David Gibson 提交于
Oops, replacing the two u64s in struct ipc64_perm with __u32s changed the alignment of that structure, which could mess up userspace. Revert to using two unsigned long longs (which is what ppc32 had originally). ppc64 orignally had two unsigned longs, but long long is the same size on 64 bit, so this should be ok there too. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Move struct ptregs32 into asm-ppc64/ppc32.h Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Michael Ellerman 提交于
Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
-
由 Michael Ellerman 提交于
Move pSeries specific code in set_dabr() into a ppc_md function, this will allow us to keep plpar_wrappers.h private to platforms/pseries. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
-
由 Paul Mackerras 提交于
This moves rtas-proc.c and rtas_flash.c into arch/powerpc/kernel, since cell wants them as well as pseries (and chrp can use rtas-proc.c too, at least in principle). rtas_fw.c is gone, with its bits moved into rtas_flash.c and rtas.c. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 02 11月, 2005 21 次提交
-
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 David Gibson 提交于
The ppc64 versions of numnodes.h and sparsemem.h can be safely moved to asm-powerpc with no changes apart from changing the #define to the standard _ASM_POWERPC_ form. There are no ppc32 versions of these files, because they only have any effect if CONFIG_SPARSEMEM is enabled, which it never can be on ppc32. Built and booted on pSeries (POWER5), built for 32-bit powermac. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Paul Mackerras 提交于
This simplifies the macros which are different between 32-bit and 64-bit. It also fixes a couple of printks on the bug->line element, which is now a long. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Al Viro 提交于
DATA_TYPE is really not a good thing to put into header that gets included all over the tree... Just make the cast always (long) and get rid of DATA_TYPE altogether. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 David Gibson 提交于
This patch merges the ppc32 and ppc64 versions of futex.h, essentially by taking the ppc64 version as the powerpc version. The old ppc32 version did not implement the futex_atomic_op_inuser() callback (it always returned -ENOSYS), so FUTEX_WAKE_OP would not work on ppc32. In fact the ppc64 version of this function is almost suitable for ppc32 as well - the only change needed is to extend ppc_asm.h with a macro expanding to to the right pseudo-op to store a pointer (either ".long" or ".llong"). Built and booted on pSeries. Built for 32-bit powermac. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
Oops, when merging ipcbuf.h, I forgot that 'u64' can't be used in user-visible headers. This patch corrects the problem, replacing the unused fields with an array of four __u32s. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
- 01 11月, 2005 6 次提交
-
-
由 Paul Mackerras 提交于
The bug_entry struct had an int in the middle of pointers and unsigned longs, and the inline asm that generated the bug table entries didn't insert the necessary padding, so the fields following it didn't get initialized properly and an oops resulted. This changes the int field (the line number) to a long so that all the fields are the same size and no padding is required. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
Here's a revised version. This re-introduces the set_bits() function from ppc64, which I removed because I thought it was unused (it exists on no other arch). In fact it is used in the powermac interrupt code (but not on pSeries). - We use LARXL/STCXL macros to generate the right (32 or 64 bit) instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S - ppc32 previously used a full "sync" barrier at the end of test_and_*_bit(), whereas ppc64 used an "isync". The merged version uses "isync", since I believe that's sufficient. - The ppc64 versions of then minix_*() bitmap functions have changed semantics. Previously on ppc64, these functions were big-endian (that is bit 0 was the LSB in the first 64-bit, big-endian word). On ppc32 (and x86, for that matter, they were little-endian. As far as I can tell, the big-endian usage was simply wrong - I guess no-one ever tried to use minixfs on ppc64. - On ppc32 find_next_bit() and find_next_zero_bit() are no longer inline (they were already out-of-line on ppc64). - For ppc64, sched_find_first_bit() has moved from mmu_context.h to the merged bitops. What it was doing in mmu_context.h in the first place, I have no idea. - The fls() function is now implemented using the cntlzw instruction on ppc64, instead of generic_fls(), as it already was on ppc32. - For ARCH=ppc, this patch requires adding arch/powerpc/lib to the arch/ppc/Makefile. This in turn requires some changes to arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc. Built and running on G5. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
This patch merges ppc32 and ppc64 versions of ipcbuf.h. The merge is essentially trivial, since the structure defined in each version was already identical. Only wrinkle is that the merged version now includes linux/types.h in order to get the fixed width integer types. In fact, the old versions probably should have been including that anyway, since the file uses various __kernel_*_t types. Built and booted on G5, built for 32-bit pmac, but not booted, since the merge tree currently doesn't boot there. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Arnd Bergmann 提交于
Cell uses the same code as pSeries for flashing the firmware through rtas, so the implementation should not be part of platforms/pseries. Put it into arch/powerpc/kernel instead. Signed-off-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Arnd Bergmann 提交于
The official name for BPA is now CBEA (Cell Broadband Engine Architecture). This patch renames all occurences of the term BPA to 'Cell' for easier recognition. Signed-off-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-