- 10 7月, 2007 1 次提交
-
-
由 Jens Axboe 提交于
They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 22 5月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 5月, 2007 1 次提交
-
-
由 Christoph Lameter 提交于
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2007 2 次提交
-
-
由 Randy Dunlap 提交于
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guillaume Chazarain 提交于
Cleanup: setting an outstanding error on a mapping was open coded too many times. Factor it out in mapping_set_error(). Signed-off-by: NGuillaume Chazarain <guichaz@yahoo.fr> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2007 1 次提交
-
-
由 Christoph Lameter 提交于
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by SLAB. I think its purpose was to have a callback after an object has been freed to verify that the state is the constructor state again? The callback is performed before each freeing of an object. I would think that it is much easier to check the object state manually before the free. That also places the check near the code object manipulation of the object. Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was compiled with SLAB debugging on. If there would be code in a constructor handling SLAB_DEBUG_INITIAL then it would have to be conditional on SLAB_DEBUG otherwise it would just be dead code. But there is no such code in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real use of, difficult to understand and there are easier ways to accomplish the same effect (i.e. add debug code before kfree). There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be clear in fs inode caches. Remove the pointless checks (they would even be pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors. This is the last slab flag that SLUB did not support. Remove the check for unimplemented flags from SLUB. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 5月, 2007 2 次提交
-
-
由 Marc Eshel 提交于
Add NFS lock support to GFS2. Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Marc Eshel 提交于
posix_test_lock() and ->lock() do the same job but have gratuitously different interfaces. Modify posix_test_lock() so the two agree, simplifying some code in the process. Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com> Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu>
-
- 03 5月, 2007 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
We need to work on cleaning up the relationship between kobjects, ksets and ktypes. The removal of 'struct subsystem' is the first step of this, especially as it is not really needed at all. Thanks to Kay for fixing the bugs in this patch. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 5月, 2007 19 次提交
-
-
由 Steven Whitehouse 提交于
Now that the patch from -mm has gone upstream, we can uncomment the code in GFS2 which uses sprintf_symbol. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: Robert Peterson <rpeterso@redhat.com>
-
alpha: fs/gfs2/dir.c: In function 'gfs2_dir_read_leaf': fs/gfs2/dir.c:1322: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'sector_t' fs/gfs2/dir.c: In function 'gfs2_dir_read': fs/gfs2/dir.c:1455: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type '__u64' Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
If a stuffed file is mmaped and a page fault is generated at some offset above the initial page, we need to create a zero page to hang the buffer heads off before we can unstuff the file. This is a fix for bz #236087 Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Josef Bacik 提交于
This patch converts the mount option parsing to use the kernels lib/parser stuff like all of the other filesystems. I tested this and it works well. Thank you, Signed-off-by: NJosef Bacik <jwhiter@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Robert Peterson 提交于
The patch below consists of the following changes (in code order): 1. I fixed a minor compiler warning regarding the printing of a kernel symbol address. 2. I implemented a suggestion from Dave Teigland that moves the debugfs information for gfs2 into a subdirectory so we can easily expand our use of debugfs in the future. The current code keeps the glock information in: /debug/gfs2/<fs> With the patch, the new code keeps the glock information in: /debug/gfs2/<fs>/glock That will allow us to create more debugfs files in the future. 3. This fixes a bug whereby a failed mount attempt causes the debugfs file to not be deleted. Failed mount attempts should always clean up after themselves, including deleting the debugfs file and/or directory. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This patch detects when the number of entries in a leaf block or inode block (in the case of stuffed directories) is corrupt and informs the user. It prevents us from running off the end of the array thats been allocated for the sorting in this case, Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Robert Peterson 提交于
This is for Bugzilla Bug 236008: Kernel gpf doing cat /debugfs/gfs2/xxx (lock dump) seen at the "gfs2 summit". This also fixes the bug that caused garbage to be printed by the "initialized at" field. I apologize for the kludge, but that code will all be ripped out anyway when the official sprint_symbol function becomes available in the Linux kernel. I also changed some formatting so that spaces are replaced by proper tabs. Signed-off-by: NRobert Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Ths following patch makes GFS2 use the rgrp flags properly. Although there are also separate flags for both data and metadata as well, I've not implemented these as there seems little use for them. On the otherhand, the "noalloc" flag is generally useful for future changes we might which to make, so this ensures that we interpret it correctly. In addition I fixed the comment above the function which was incorrect. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This sets the drop_count to 0 by default which is a better default for most people. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
We always want to see the details of the error returned to gfs, but log_debug is often turned off, so use log_error (printk). Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Robert Peterson 提交于
In Testing the previously posted and accepted patch for https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=228540 I uncovered some gfs2 badness. It turns out that the current gfs2 code saves off a process pointer when glocks is taken in both the glock and glock holder structures. Those structures will persist in memory long after the process has ended; pointers to poisoned memory. This problem isn't caused by the 228540 fix; the new capability introduced by the fix just uncovered the problem. I wrote this patch that avoids saving process pointers and instead saves off the process pid. Rather than referencing the bad pointers, it now does process lookups. There is special code that makes the output nicer for printing holder information for processes that have ended. This patch also adds a stub for the new "sprint_symbol" function that exists in Andrew Morton's -mm patch set, but won't go into the base kernel until 2.6.22, since it adds functionality but doesn't fix a bug. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
This is a fix for bz #208514. When GFS2 frees up space, the freed blocks aren't available for reuse until the resource group is successfully written to the ondisk journal. So in rare cases, GFS2 operations will fail, saying that the filesystem is out of space, when in reality, you are just waiting for a log flush. For instance, on a 1Gig filesystem, if I continually write 10 Mb to a file, and then truncate it, after a hundred interations, the write will fail with -ENOSPC, even though the filesystem is just 1% full. The attached patch calls a log flush in these cases. I tested this patch fairly heavily to check if there were any locking issues that I missed, and it seems to work just fine. Also, this patch only does the log flush if get_local_rgrp makes a complete loop of resource groups without skipping any do to locking issues. The code would be slightly simpler if it just always did the log flush after the first failed pass, and you could only ever have to go through the loop twice, instead of up to three times. However, I guessed that failing to find a rg simply do to locking issues would be common enough to skip the log flush in that case, but I'm not certain that this is the right way to go. Either way, I don't suppose this code will be hit all that often. Signed-off-by: NBenjamin E. Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
When glock_lo_add and rg_lo_add attempt to add an element to the log, they check to see if has already been added before locking the log. If another process adds that element to the log in this window between the check and locking the log, the element will be added to the list twice. This causes the log element list to become corrupted in such a way that the log element can never be successfully removed from the list. This patch pulls the list_empty() check inside the log lock, to remove this window. Signed-off-by: NBenjamin E. Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The following patch speeds up lock_dlm's locking by moving the sprintf out from the lock acquisition path and into the lock creation path. This reduces the amount of CPU time used in acquiring locks by a fair amount. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Acked-by: NDavid Teigland <teigland@redhat.com>
-
由 Steven Whitehouse 提交于
Since gcc didn't evaluate the last two terms of the expression in glock.c:1881 as a constant expression, it resulted in an error on i386 due to the lack of a 64bit divide instruction. This adds some brackets to fix the problem. This was reported by Andrew Morton. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
-
由 Steven Whitehouse 提交于
This patch prevents the printing of a warning message in cases where the fs is functioning normally by handing off responsibility for unlinked, but still open inodes, to another node for eventual deallocation. Also, there is now an improved system for ensuring that such requests to other nodes do not get lost. The callback on the iopen lock is only ever called when i_nlink == 0 and when a node is unable to deallocate it due to it still being in use on another node. When a node receives the callback therefore, it knows that i_nlink must be zero, so we mark it as such (in gfs2_drop_inode) in order that it will then attempt deallocation of the inode itself. As an additional benefit, queuing a demote request no longer requires a memory allocation. This simplifies the code for dealing with gfs2_holders as it removes one special case. There are two new fields in struct gfs2_glock. gl_demote_state is the state which the remote node has requested and gl_demote_time is the time when the request came in. Both fields are only valid when the GLF_DEMOTE flag is set in gl_flags. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Josef Whiter 提交于
If we are writing a file, and in the middle of writing the file another node attempts to get a shared lock on that file (by doing a du for example) the process doing the writing will hang waiting on lock_page. The reason for this is because when we have waiters on a exclusive glock, we will go through and flush out all dirty pages associated with that inode and release the lock. The problem is that when we flush the dirty pages, we could hit a page that we have locked durring the generic_file_buffered_write part of this operation. This patch unlocks the page before we go to dequeue the lock and locks it immediatly afterwards, since generic_file_buffered_write needs the page locked when the commit_write is completed. This patch resolves the problem, however if somebody sees a better way to do this please don't hesistate to yell. Signed-off-by: NJosef Whiter <jwhiter@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Josef Whiter 提交于
If you specify an invalid mount option when trying to mount a gfs2 filesystem, gfs2 will oops. The attached patch resolves this problem. Signed-off-by: NJosef Whiter <jwhiter@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Robert Peterson 提交于
The attached patch resolves bz 228540. This adds the capability for gfs2 to dump gfs2 locks through the debugfs file system. This used to exist in gfs1 as "gfs_tool lockdump" but it's missing from gfs2 because all the ioctls were stripped out. Please see the bugzilla for more history about the fix. This patch is also attached to the bugzilla record. The patch is against Steve Whitehouse's latest nmw git tree kernel (2.6.21-rc1) and has been tested on system trin-10. Signed-off-by: NRobert Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 08 3月, 2007 11 次提交
-
-
由 Steven Whitehouse 提交于
The following removes an incorrect assertion from the GFS2 glops code. This fixes Red Hat bz 229873. Thanks to Abhijith Das for testing the patch and confirming the fix. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: Abhijith Das <adas@redhat.com>
-
fs/gfs2/glock.c:2198: error: 'THIS_MODULE' undeclared here (not in a function) Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Steven Whitehouse 提交于
The ->go_drop_bh function is never used, so this removes it and the single caller, Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Remove an unused variable. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The following patch fixes Red Hat bz 229831. Without this patch its possible for the wrong inode to be returned in certain cases. It is a pretty unusual event, so that its taken some time to track down. Thanks and due to Josef Whiter who did a lot of the testing required to thrack this down and fix it. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The below patch fixes a problem where we were not flushing rgrps correctly. It only occurred in the specific case that a callback was received for an rgrp which was dirty and when a journal log flush had not already resulted in the rgrp being flushed anyway. This fixes Red Hat bz 230143, Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Wendy Cheng 提交于
ok, the following is the minimum changes to get NFSD going before we settle down this issue .. would appreciate this in the tree so other NFS related works can get done in parallel. Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Josef Whiter 提交于
This fixes a problem I encountered while running bonnie++. When you have one thread that opens a file and starts to write to it, and then another thread that tries to open and write to the same file, the second thread will loop forever trying to grab the inode lock for that inode. Basically we come in through generic_buffered_file_write, which calls gfs2_prepare_write, which then attempts to grab the glock. Because we don't own the lock, gfs2_prepare_write gets GLR_TRYFAILED, which returns AOP_TRUNCATED_PAGE to generic_buffered_file_write. At this point generic_buffered_file_write loops around again and immediately retries the prepare_write. This means that the second process never gets off of the processor in order to allow the process that holds the lock to finish its work and let go of the lock. This patch makes gfs2_glock_nq schedule() if it gets back a GLR_TRYFAILED, which resolves this problem. Signed-off-by: NJosef Whiter <jwhiter@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Wendy Cheng 提交于
File handle checking error found in '07 NFS connectathon. The fh_type and fh_len are not necessarily identical. Some of the client machines could fail mount with stale filehandle without this patch. Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Richard Fearn 提交于
Patch for the 2.6.20 stable tree that adds a missing newline to one of the printk messages in fs/gfs2/ops_fstype.c. Signed-off-by: NRichard Fearn <richardfearn@gmail.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Josef Whiter 提交于
This patch fixes a locking mistake in the quota code, we do a mutex_lock instead of a mutex_unlock. Signed-off-by: NJosef Whiter <jwhiter@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 15 2月, 2007 1 次提交
-
-
由 Tim Schmielau 提交于
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-