- 17 7月, 2012 40 次提交
-
-
由 Alexander Duyck 提交于
The interrupt registers accessed in ixgbevf are more similar to the igb style registers than they are to the ixgbe style registers. As such we would be better off setting up the code for the EICS, EIMS, EICS, EIAM, and EIAC like we do in igb instead of ixgbe. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
Currently the VF driver is processing all of the transmits in interrupt context. This can be messy since the Rx is all handled in NAPI and this may result in interrupts being disabled. In order to resolve this move all of the Tx packet processing into NAPI and combine all of the interrupt and polling routines into just a pair of functions. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
For most cases the ixgbevf driver will only ever contain a single Tx and single Rx queue. In order to track that it makes more sense to use a pointer instead of using a bitmap which must be search in order to locate the ring on an adapter index. As such I am changing the code to use pointers and an iterator to access all rings on a given q_vector. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change cleans up the accounting needed at the start of xmit_frame so that we can avoid doing too much work to determine how many descriptors we will need. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch drops the use of eitr_low and eitr_high as values being stored in the adapter structure. Since the values have no external way to be changed they might as well just be hard coded values and save us the space on the adapter structure. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The IXGBE_FLAG_RX_CSUM_ENABLED flag is redundant since NETIF_F_RXCSUM is keeping the value we want to already have. As such we can drop the redundant flag and just make use of NETIF_F_RXCSUM. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
There is no need to keep a separate netdev_registered value since that is already stored in the netdev itself. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
There is a large amount of code present in this driver to support features that either do no exist or are not supported such ask packet split, DCA, or RSC. This patch strips out almost all of that code and in the case of conditionals based on unused flags I am flatting the code out to just the path that would have been selected. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Eric Dumazet 提交于
Implement the RFC 5691 mitigation against Blind Reset attack using RST bit. Idea is to validate incoming RST sequence, to match RCV.NXT value, instead of previouly accepted window : (RCV.NXT <= SEG.SEQ < RCV.NXT+RCV.WND) If sequence is in window but not an exact match, send a "challenge ACK", so that the other part can resend an RST with the appropriate sequence. Add a new sysctl, tcp_challenge_ack_limit, to limit number of challenge ACK sent per second. Add a new SNMP counter to count number of challenge acks sent. (netstat -s | grep TCPChallengeACK) Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Wei 提交于
We need to check the passed in multicast address and return appropriate errno(EINVAL) if it is not valid. And it's no need to walk through the ipv6_mc_list in this situation. Signed-off-by: NLi Wei <lw@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can-next由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== the fifth pull request for upcoming v3.6 net-next. The first two patches (created by me) add const qualifiers to the flexcan and mpc5xxx_can driver. The next patch by Julia Lawall fixes a return value problem in the error path of the softing driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Put the numbers used for stop/resume queue in a single place and fix the condition for sanity check. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Typically, the return value desired for the failure of a function with an integer return value is a negative integer. In these cases, the return value is sometimes a negative integer and sometimes 0, due to a subsequent initialization of the return variable within the loop. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) //<smpl> @r exists@ identifier ret; position p; constant C; expression e1,e3,e4; statement S; @@ ret = -C ... when != ret = e3 when any if@p (...) S ... when any if (\(ret != 0\|ret < 0\|ret > 0\) || ...) { ... return ...; } ... when != ret = e3 when any *if@p (...) { ... when != ret = e4 return ret; } //</smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NKurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Christian Riesch 提交于
The Asix AX88172A is a USB 2.0 Ethernet interface that supports both an internal PHY as well as an external PHY (connected via MII). This patch adds a driver for the AX88172A and provides support for both modes and the phylib. Signed-off-by: NChristian Riesch <christian.riesch@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Riesch 提交于
Allow the new driver for the AX88172A to share code with the existing drivers for ASIX devices. Signed-off-by: NChristian Riesch <christian.riesch@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Riesch 提交于
This patch further creates two additional copies of asix.c. In another patch these copies will be used to factor out common code. Signed-off-by: NChristian Riesch <christian.riesch@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Bolle 提交于
Building Gigaset's CAPI support without Gigaset's debugging enabled triggers this GCC warning: 'format_ie' defined but not used [-Wunused-function] Silence this warning by wrapping format_ie() in an "#ifdef CONFIG_GIGASET_DEBUG" and "#endif" pair. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Valentin Ilie 提交于
V2: Replaced assignment in if statement. Fixed coding style issues. Signed-off-by: NValentin Ilie <valentin.ilie@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masanari Iida 提交于
Correct spelling typo in irda. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ioan Orghici 提交于
Fix the following sparse warning: * symbol 'sctp_init_cause_fixed' was not declared. Should it be static? Signed-off-by: NIoan Orghici <ioanorghici@gmail.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
If the PCI block has reset, the memory enable bit will be reset and the device will not respond to MMIO access. bnx2_reset_task() currently will not recover when this happens. Add code to detect this condition and restore the PCI state. This scenario has been reported by some users. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Some tg3 devices have management firmware that can export sensor data. Export temperature sensor reading via hwmon sysfs. [hwmon interface suggested by Ben Hutchings <bhutchings@solarflare.com>] Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
for retreiving temperature sensor data. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
by refactoring code in tg3_ape_send_event(). The common function will be used in subsequent patches. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The driver currently skips setting this flag if the VPD contains the firmware version string. We fix this by separating the probing of NCSI from the reading of the NCSI version string. The APE_HAS_NCSI flag is needed to properly read sensor data. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
netem does an early orphaning of skbs. Doing so breaks TCP Small Queue or any mechanism relying on socket sk_wmem_alloc feedback. Ideally, we should perform this orphaning after the rate module and before the delay module, to mimic what happens on a real link : skb orphaning is indeed normally done at TX completion, before the transit on the link. +-------+ +--------+ +---------------+ +-----------------+ + Qdisc +---> Device +--> TX completion +--> links / hops +-> + + + xmit + + skb orphaning + + propagation + +-------+ +--------+ +---------------+ +-----------------+ < rate limiting > < delay, drops, reorders > If netem is used without delay feature (drops, reorders, rate limiting), then we should avoid early skb orphaning, to keep pressure on sockets as long as packets are still in qdisc queue. Ideally, netem should be refactored to implement delay module as the last stage. Current algorithm merges the two phases (rate limiting + delay) so its not correct. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Mark Gordon <msg@google.com> Cc: Andreas Terzis <aterzis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jett Kirsher says: ==================== This series contains updates to e1000e and ixgbe. ... Alexander Duyck (5): ixgbe: Simplify logic for getting traffic class from user priority ixgbe: Cleanup unpacking code for DCB ixgbe: Populate the prio_tc_map in ixgbe_setup_tc ixgbe: Add function for obtaining FCoE TC based on FCoE user priority ixgbe: Merge FCoE set_num and cache_ring calls into RSS/DCB config ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
skb_fill_rx_data() pulls 64 byte of data in skb->data Its too much for TCP (with no options) on IPv4, as total size of headers is 14 + 40 = 54 This means tcp stack and splice() are suboptimal, since tcp payload is in part in tcp->data, and in part in skb frag. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Incorporated review comment from Eric Dumazet. Added description about different RSS hash types which adapter is capable of. Will add support for ETHTOOL_GRXFH and ETHTOOL_SRXFX as suggested by Ben Hutchings in a later patch. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The hash size is doubled when it needs to grow and compared against hash_max. The >= comparison will limit the hash table size to half of what is expected i.e. the default 512 hash_max will not allow the hash table to grow larger than 256. Also print the hash table limit instead of the desirable size when the limit is reached. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We dereferenced "mclist" after the kfree(). Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
This should be ">=" here instead of ">". MLX4_NET_TRANS_RULE_NUM is 6. We use "spec->id" as an array offset into the __rule_hw_sz[] and __sw_id_hw[] arrays which have 6 elements. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NHadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Ovsienko 提交于
Userspace implementations of network routing protocols sometimes need to tell RA-originated IPv6 routes from other kernel routes to make proper routing decisions. This makes most sense for RA routes with nexthops, namely, default routes and Route Information routes. The intended mean of preserving RA route origin in a netlink message is through indicating RTPROT_RA as protocol code. Function rt6_fill_node() tried to do that for default routes, but its test condition was taken wrong. This change is modeled after the original mailing list posting by Jeff Haran. It fixes the test condition for default route case and sets the same behaviour for Route Information case (both types use nexthops). Handling of the 3rd RA route type, Prefix Information, is left unchanged, as it stands for interface connected routes (without nexthops). Signed-off-by: NDenis Ovsienko <infrastation@yandex.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
This adds support for setting synthetic NIC MAC address from within Linux guests. Before using this feature, the option "spoofing of MAC address" should be enabled at the Hyper-V manager / Settings of the synthetic NIC. Thanks to Kin Cho <kcho@infoblox.com> for the initial implementation and tests. And, thanks to Long Li <longli@microsoft.com> for the debugging works. Reported-and-tested-by: NKin Cho <kcho@infoblox.com> Reported-by: NLong Li <longli@microsoft.com> Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
Lenght field should be encoded using big endian byte order, such as intend in the specs. As it is currently written, the len field would not be decoded properly on an implementation using the correct byte ordering. Hence, it could lead to interroperability issues. Also, I rewrote the code so that iphc0 argument of lowpan_alloc_new_frame could be removed. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
The tag field should be stored and accessed using big endian byte order (as intended in the specs). Or else, when displayed with a trafic analyser, such a Wireshark, the field not properly displayed (e.g. 0x01 00 instead of 0x00 01, and so on). Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
When a UDP packet gets fragmented, a crash will occur at reassembly time. This is because skb->transport_header is not set during earlier period of fragment reassembly. As a consequence, call to udp_hdr() return NULL and uh (which is NULL) gets dereferenced without much test. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-