Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 01 7月, 2015 16 次提交
  3. 30 6月, 2015 12 次提交
  5. 29 6月, 2015 12 次提交
    • M
      crypto: qat - Deletion of unnecessary checks before two function calls · 12a4bd31
      由 Markus Elfring 提交于 
      The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately.
Thus the test around the calls is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      12a4bd31
    • F
      net: phy: mdio-bcm-unimac: workaround initial read failures for integrated PHYs · d8e704e4
      由 Florian Fainelli 提交于 
      All BCM7xxx integrated Gigabit PHYs have an issue in their MDIO
management controller which will make the initial read or write to them
to fail and return 0xffff. This is a real issue as the typical first
thing we do is read from MII_PHYSID1 and MII_PHYSID2 from get_phy_id()
to register a driver for these PHYs.

Coupled with the workaround in drivers/net/phy/bcm7xxx.c, this
workaround for the MDIO bus controller consists in scanning the list of
PHYs to do this initial read workaround for as part of the MDIO bus
reset routine which is invoked prior to mdiobus_scan().

Once we have a proper PHY driver/device registered, all workarounds are
located there (e.g: power management suspend/resume calls).
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d8e704e4
    • F
      net: bcmgenet: workaround initial read failures for integrated PHYs · 7b635da8
      由 Florian Fainelli 提交于 
      All BCM7xxx integrated Gigabit PHYs have an issue in their MDIO
management controller which will make the initial read or write to them
to fail and return 0xffff. This is a real issue as the typical first
thing we do is read from MII_PHYSID1 and MII_PHYSID2 from get_phy_id()
to register a driver for these PHYs.

Coupled with the workaround in drivers/net/phy/bcm7xxx.c, this
workaround for the MDIO bus controller consists in scanning the list of
PHYs to do this initial read workaround for as part of the MDIO bus
reset routine which is invoked prior to mdiobus_scan().

Once we have a proper PHY driver/device registered, all workarounds are
located there (e.g: power management suspend/resume calls).
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7b635da8
    • F
      net: phy: bcm7xxx: workaround MDIO management controller initial read · 8e346e15
      由 Florian Fainelli 提交于 
      The initial MDIO read or write towards the BCM7xxx integrated PHY may
fail, workaround this by inserting a dummy MII_BMSR read to force the
MDIO management controller to see at least one valid transaction and get
out of stuck state out of reset.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8e346e15
    • M
      bnx2x: fix DMA API usage · 8031612d
      由 Michal Schmidt 提交于 
      With CONFIG_DMA_API_DEBUG=y bnx2x triggers the error "DMA-API: device
driver frees DMA memory with wrong function".
On archs where PAGE_SIZE > SGE_PAGE_SIZE it also triggers "DMA-API:
device driver frees DMA memory with different size".

Fix this by making the mapping and unmapping symmetric:
 - Do not map the whole pool page at once. Instead map the
   SGE_PAGE_SIZE-sized pieces individually, so they can be unmapped in
   the same manner.
 - What's mapped using dma_map_page() must be unmapped using
   dma_unmap_page().

Tested on ppc64.

Fixes: 4cace675 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8031612d
    • G
      net: via: VIA_RHINE and VIA_VELOCITY should depend on HAS_DMA · 0f8b6cea
      由 Geert Uytterhoeven 提交于 
      If NO_DMA=y:

    ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_set_mask" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_mapping_error" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_map_single" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_alloc_coherent" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_free_coherent" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_unmap_single" [drivers/net/ethernet/via/via-rhine.ko] undefined!
    ERROR: "dma_map_page" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_free_coherent" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_unmap_single" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_map_single" [drivers/net/ethernet/via/via-velocity.ko] undefined!
    ERROR: "dma_alloc_coherent" [drivers/net/ethernet/via/via-velocity.ko] undefined!

Before, the symbols depended implicitly on HAS_DMA through PCI or
USE_OF.  Add explicit dependencies on HAS_DMA to fix this.

Fixes: b7d3282a ("net: via/Kconfig: replace USE_OF with OF_???")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0f8b6cea
    • S
      net/phy: tune get_phy_c45_ids to support more c45 phy · da1da284
      由 Shengzhou Liu 提交于 
      As some C45 10G PHYs(e.g. Cortina CS4315/CS4340 PHY) have
zero Devices In package, current driver can't get correct
devices_in_package value by non-zero Devices In package.
so let's probe more with zero Devices In package to support
more C45 PHYs.
Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      da1da284
    • E
      bnx2x: fix lockdep splat · d53c66a5
      由 Eric Dumazet 提交于 
      Michel reported following lockdep splat

[   44.718117] INFO: trying to register non-static key.
[   44.723081] the code is fine but needs lockdep annotation.
[   44.728559] turning off the locking correctness validator.
[   44.734036] CPU: 8 PID: 5483 Comm: ethtool Not tainted 4.1.0
[   44.770289] Call Trace:
[   44.772741]  [<ffffffff816eb1cd>] dump_stack+0x4c/0x65
[   44.777879]  [<ffffffff8111d921>] ? console_unlock+0x1f1/0x510
[   44.783708]  [<ffffffff811121f5>] __lock_acquire+0x1d05/0x1f10
[   44.789538]  [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90
[   44.795276]  [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0
[   44.801967]  [<ffffffff8111390d>] ? trace_hardirqs_on+0xd/0x10
[   44.807793]  [<ffffffff811330fa>] ? hrtimer_try_to_cancel+0x4a/0x250
[   44.814142]  [<ffffffff81112ba6>] lock_acquire+0xb6/0x290
[   44.819537]  [<ffffffff810d6675>] ? flush_work+0x5/0x280
[   44.824844]  [<ffffffff810d66ad>] flush_work+0x3d/0x280
[   44.830061]  [<ffffffff810d6675>] ? flush_work+0x5/0x280
[   44.835366]  [<ffffffff816f3c43>] ? schedule_hrtimeout_range+0x13/0x20
[   44.841889]  [<ffffffff8112ec9b>] ? usleep_range+0x4b/0x50
[   44.847365]  [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90
[   44.853102]  [<ffffffff810d8585>] ? __cancel_work_timer+0x105/0x1c0
[   44.859359]  [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0
[   44.866045]  [<ffffffff810d851f>] __cancel_work_timer+0x9f/0x1c0
[   44.872048]  [<ffffffffa0010982>] ? bnx2x_func_stop+0x42/0x90 [bnx2x]
[   44.878481]  [<ffffffff810d8670>] cancel_work_sync+0x10/0x20
[   44.884134]  [<ffffffffa00259e5>] bnx2x_chip_cleanup+0x245/0x730 [bnx2x]
[   44.890829]  [<ffffffff8110ce02>] ? up+0x32/0x50
[   44.895439]  [<ffffffff811306b5>] ? del_timer_sync+0x5/0xd0
[   44.901005]  [<ffffffffa005596d>] bnx2x_nic_unload+0x20d/0x8e0 [bnx2x]
[   44.907527]  [<ffffffff811f1aef>] ? might_fault+0x5f/0xb0
[   44.912921]  [<ffffffffa005851c>] bnx2x_reload_if_running+0x2c/0x50 [bnx2x]
[   44.919879]  [<ffffffffa005a3c5>] bnx2x_set_ringparam+0x2b5/0x460 [bnx2x]
[   44.926664]  [<ffffffff815d498b>] dev_ethtool+0x55b/0x1c40
[   44.932148]  [<ffffffff815dfdc7>] ? rtnl_lock+0x17/0x20
[   44.937364]  [<ffffffff815e7f8b>] dev_ioctl+0x17b/0x630
[   44.942582]  [<ffffffff815abf8d>] sock_do_ioctl+0x5d/0x70
[   44.947972]  [<ffffffff815ac013>] sock_ioctl+0x73/0x280
[   44.953192]  [<ffffffff8124c1c8>] do_vfs_ioctl+0x88/0x5b0
[   44.958587]  [<ffffffff8110d0b3>] ? up_read+0x23/0x40
[   44.963631]  [<ffffffff812584cc>] ? __fget_light+0x6c/0xa0
[   44.969105]  [<ffffffff8124c781>] SyS_ioctl+0x91/0xb0
[   44.974149]  [<ffffffff816f4dd7>] system_call_fastpath+0x12/0x6f

As bnx2x_init_ptp() is only called if bp->flags contains PTP_SUPPORTED,
we also need to guard bnx2x_stop_ptp() with same condition, otherwise
ptp_task workqueue is not initialized and kernel barfs on
cancel_work_sync()

Fixes: eeed018c ("bnx2x: Add timestamping and PTP hardware clock support")
Reported-by: NMichel Lespinasse <walken@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Michal Kalderon <Michal.Kalderon@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: David Decotigny <decot@google.com>
Acked-by: NSony Chacko <sony.chacko@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d53c66a5
    • G
      net: fec: don't access RACC register when not available · 18803495
      由 Greg Ungerer 提交于 
      Not all silicon implementations of the Freescale FEC hardware module
have the RACC (Receive Accelerator Function) register, so we should not
be trying to access it on those that don't. Currently none of the ColdFire
based parts with a FEC have it.

Support for RACC was introduced by commit 4c09eed9 ("net: fec: Enable imx6
enet checksum acceleration"). A fix was introduced in commit d1391930
("net: fec: Fix build for MCF5272") that disables its use on the ColdFire
M5272 part, but it doesn't fix the general case of other ColdFire parts.

To fix we create a quirk flag, FEC_QUIRK_HAS_RACC, and check it before
working with the RACC register.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      18803495
    • M
      net: phy: fix phy link up when limiting speed via device tree · eb686231
      由 Mugunthan V N 提交于 
      When limiting phy link speed using "max-speed" to 100mbps or less on a
giga bit phy, phy never completes auto negotiation and phy state
machine is held in PHY_AN. Fixing this issue by comparing the giga
bit advertise though phydev->supported doesn't have it but phy has
BMSR_ESTATEN set. So that auto negotiation is restarted as old and
new advertise are different and link comes up fine.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      eb686231
    • G
      drivers: net: xgene: Pre-initialize ret in xgene_enet_get_resources() · 2e598712
      由 Geert Uytterhoeven 提交于 
      If CONFIG_ACPI=n:

    drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_get_resources’:
    drivers/net/ethernet/apm/xgene/xgene_enet_main.c:951: warning: ‘ret’ may be used uninitialized in this function

If the driver is bound to a legacy platform device, ret will contain
arbitrary data. If it is non-zero, it will be returned to the caller as
an error code.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2e598712
    • L
      xen-netfront: Remove the meaningless code · 905726c1
      由 Li, Liang Z 提交于 
      The function netif_set_real_num_tx_queues() will return -EINVAL if
the second parameter < 1, so call this function with the second
parameter set to 0 is meaningless.
Signed-off-by: NLiang Li <liang.z.li@intel.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      905726c1