- 11 7月, 2007 2 次提交
-
-
由 Allan Stephens 提交于
This patch modifies TIPC's socket API to utilize existing generic routines to indicate unsupported operations, rather than adding similar TIPC-specific routines. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NJon Paul Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch simplifies TIPC's Ethernet receive routine to take advantage of information already present in each incoming sk_buff indicating whether the packet was explicitly sent to the interface, has been broadcast to all interfaces, or was picked up because the interface is in promiscous mode. This new approach also fixes the problem of TIPC accepting unwanted traffic through UML's multicast-based Ethernet interfaces (which deliver traffic in a promiscuous manner even if the interface is not configured to be promiscuous). Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NJon Paul Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2007 1 次提交
-
-
由 Florian Westphal 提交于
The tipc netlink config handler uses the nlmsg_pid from the request header as destination for its reply. If the application initialized nlmsg_pid to 0, the reply is looped back to the kernel, causing hangup. Fix: use nlmsg_pid of the skb that triggered the request. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2007 2 次提交
-
-
由 Jon Paul Maloy 提交于
Signed-off-by: NJon Paul Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2007 1 次提交
-
-
由 Pavel Emelianov 提交于
Cleanup of dev_base list use, with the aim to simplify making device list per-namespace. In almost every occasion, use of dev_base variable and dev->next pointer could be easily replaced by for_each_netdev loop. A few most complicated places were converted to using first_netdev()/next_netdev(). Signed-off-by: NPavel Emelianov <xemul@openvz.org> Acked-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2007 1 次提交
-
-
由 Alexander E. Patrakov 提交于
Documentation/modules.txt doesn't exist, but Documentation/kbuild/modules.txt does. Signed-off-by: Alexander E. Patrakov Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 26 4月, 2007 8 次提交
-
-
由 Allan Stephens 提交于
This patch makes two enhancements to msg_set_bits(): 1) It now ignores any bits of the new field value that are not covered by the mask being used. (Previously, if the new value exceeded the size of the mask the extra bits could corrupt other fields in the message header word being updated.) 2) The code has been optimized to minimize the number of run-time endianness conversion operations by leveraging the fact that the mask (and, in some cases, the value as well) is constant and the necessary conversion can be performed by the compiler. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NJon Paul Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common "(struct nlmsghdr *)skb->data" sequence, so that we reduce the number of direct accesses to skb->data and for consistency with all the other cast skb member helpers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the places where we need a pointer to the mac header, it is still legal to touch skb->mac.raw directly if just adding to, subtracting from or setting it to another layer header. This one also converts some more cases to skb_reset_mac_header() that my regex missed as it had no spaces before nor after '=', ugh. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 12月, 2006 1 次提交
-
-
由 Robert P. J. Day 提交于
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 12月, 2006 1 次提交
-
-
由 Christoph Lameter 提交于
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 12月, 2006 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
The correct order is: NULL check before dereference Spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2006 13 次提交
-
-
由 Allan Stephens 提交于
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch causes TIPC to return an error message when it receives an unrecognized configuration command. (Previously, the sender received no feedback.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lijun Chen 提交于
This patch allows a TIPC application to cancel an existing topology service subscription by re-requesting the subscription with the TIPC_SUB_CANCEL filter bit set. (All other bits of the cancel request must match the original subscription request.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch fixes a minor bug that prevents "tipc-config -l" from displaying the multicast link if a TIPC node has never successfully established at least one unicast link. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch corrects an issue wherein a previouly failed node could not reestablish a links to a non-failing node in the TIPC network until the latter node detected the link failure itself (which might be configured to take up to 30 seconds). The non-failing node now responds to link setup requests from a previously failed node in at most 1 second, allowing it to detect the link failure more quickly. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch tivially re-orders the entries in TIPC's list of local publications so that applications will receive publication events in the order they were published. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch enhances TIPC's Ethernet support to include VLAN interfaces. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch allows the compiler to optimize out any code that tries to send debugging output to the null print buffer (TIPC_NULL), a capability that was unintentionally broken during the recent print buffer rework. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch adds a simple test so TIPC doesn't try waking up processes waiting on a socket if there are none waiting. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
TIPC now rejects and logs link setup requests from node <Z.C.N> if the receiving node already has a functional link to that node on the associated interface, or if the requestor is using the same <Z.C.N> as the receiver. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
The stream socket send code was not initializing some required fields of the temporary msghdr structure it was utilizing; this is now fixed. A check has also been added to detect if a user illegally specifies a destination address when sending on an established stream connection. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This change modifies TIPC's print buffer code as follows: 1) Now supports small print buffers (min. size reduced from 512 bytes to 64) 2) Now uses TIPC_NULL print buffer structure to indicate null device instead of NULL pointer (this simplified error handling) 3) Fixed misuse of console buffer structure by tipc_dump() 4) Added and corrected comments in various places Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
gcc spits out this warning: net/tipc/link.c: In function ‘link_retransmit_failure’: net/tipc/link.c:1669: warning: cast from pointer to integer of different size More than a little bit ugly, storing integers in void*, but at least the code is correct, unlike some of the more crufty Linux kernel code found elsewhere. Rather than having two casts to massage the value into u32, it's easier just to have a single cast and use "%lu", since it's just a printk. Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2006 2 次提交
-
-
由 Panagiotis Issaris 提交于
Removing useless casts Signed-off-by: NPanagiotis Issaris <takis@issaris.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Panagiotis Issaris 提交于
Signed-off-by: NPanagiotis Issaris <takis@issaris.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 7月, 2006 1 次提交
-
-
由 Allan Stephens 提交于
The recent change to direct inspection of bundle buffer tailroom did not account for the possiblity of unrequested tailroom added by skb_alloc(), thereby allowing a bundle to be created that exceeds the current link MTU. An additional check now ensures that bundling works correctly no matter if the bundle buffer is smaller, larger, or equal to the link MTU. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 6月, 2006 1 次提交
-
-
由 Allan Stephens 提交于
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPer Liden <per.liden@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-