- 11 6月, 2015 1 次提交
-
-
由 Guenter Roeck 提交于
Fix include/asm-generic/io.h: In function 'readb': include/asm-generic/io.h:113:2: error: implicit declaration of function 'bfin_read8' include/asm-generic/io.h: In function 'readw': include/asm-generic/io.h:121:2: error: implicit declaration of function 'bfin_read16' include/asm-generic/io.h: In function 'readl': include/asm-generic/io.h:129:2: error: implicit declaration of function 'bfin_read32' include/asm-generic/io.h: In function 'writeb': include/asm-generic/io.h:147:2: error: implicit declaration of function 'bfin_write8' include/asm-generic/io.h: In function 'writew': include/asm-generic/io.h:155:2: error: implicit declaration of function 'bfin_write16' include/asm-generic/io.h: In function 'writel': include/asm-generic/io.h:163:2: error: implicit declaration of function 'bfin_write32' Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Fixes: 1a3372bc ("blackfin: io: define __raw_readx/writex with bfin_readx/writex") Cc: Steven Miao <realmz6@gmail.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
- 23 4月, 2015 2 次提交
-
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
- 10 1月, 2011 2 次提交
-
-
由 Mike Frysinger 提交于
Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
A bunch of arches define reads[bwl]/writes[bwl] helpers for accessing memory mapped registers. Since the Blackfin ones aren't specific to Blackfin code, move them to the common asm-generic/io.h for people. Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 07 8月, 2010 1 次提交
-
-
由 Michael Hennerich 提交于
Add SSYNC to our implementation of I/O write barrier to ensure ordering of I/O space writes. This will make sure that writes following the barrier will arrive after all previous writes. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 15 12月, 2009 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 07 10月, 2009 1 次提交
-
-
由 Robin Getz 提交于
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 19 6月, 2009 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 12 6月, 2009 1 次提交
-
-
由 Mike Frysinger 提交于
The I/O port functions take ints, so we need to cast them up before passing to our read/write funcs to avoid ugly messes of warnings. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
- 07 1月, 2009 1 次提交
-
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
- 18 11月, 2008 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
- 16 10月, 2008 1 次提交
-
-
由 Bryan Wu 提交于
This is to kill some compiling warning on DM9000 netdev driver. Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
- 27 8月, 2008 1 次提交
-
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
- 17 5月, 2008 1 次提交
-
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
- 07 2月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch removes the unused mm_{ptov,vtop}(). Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NBryan Wu <bryan.wu@analog.com> Cc: Miles Bader <miles.bader@necel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 11月, 2007 1 次提交
-
-
由 Michael Hennerich 提交于
/* * CPUs often take a performance hit when accessing unaligned memory * locations. The actual performance hit varies, it can be small if the * hardware handles it or large if we have to take an exception and fix * it * in software. * * Since an ethernet header is 14 bytes network drivers often end up * with * the IP header at an unaligned offset. The IP header can be aligned by * shifting the start of the packet by 2 bytes. Drivers should do this * with: * * skb_reserve(NET_IP_ALIGN); * * The downside to this alignment of the IP header is that the DMA is * now * unaligned. On some architectures the cost of an unaligned DMA is high * and this cost outweighs the gains made by aligning the IP header. * * Since this trade off varies between architectures, we allow * NET_IP_ALIGN * to be overridden. */ This new function insl_16 allows to read form 32-bit IO and writes to 16-bit aligned memory. This is useful in above described scenario - In particular with the AXIS AX88180 Gigabit Ethernet MAC. Once the device is in 32-bit mode, reads from the RX FIFO always decrements 4bytes. While on the other side the destination address in SDRAM is always 16-bit aligned. If we use skb_reserve(0) the receive buffer is 32-bit aligned but later we hit a unaligned exception in the IP code. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 17 10月, 2007 1 次提交
-
-
由 Ralf Baechle 提交于
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized cache managment API for I/O purposes. Originally it was basically the raw MIPS low level cache API exported to the entire world. The API has suffered from a lack of documentation, was not very widely used unlike it's more modern brothers and can easily be replaced by dma_cache_sync. So remove it rsp. turn the surviving bits back into an arch private API, as discussed on linux-arch. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NPaul Mackerras <paulus@samba.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NKyle McMartin <kyle@parisc-linux.org> Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 10月, 2007 1 次提交
-
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 12 9月, 2007 1 次提交
-
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 21 6月, 2007 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 22 5月, 2007 1 次提交
-
-
由 Michael Hennerich 提交于
1) Disable Interrupts during DMA memcpy to avoid raise conditions. 2) Mark MDMA channel 0 as reserved, since were using it internally. 3) Add DMA based equivalents for insX and outsX. 4) Our insX and outsX only handles len <= 2^16. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2007 1 次提交
-
-
由 Bryan Wu 提交于
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NAubrey Li <aubrey.li@analog.com> Signed-off-by: NJie Zhang <jie.zhang@analog.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-