The spec->autocfg.line_out_pins[] may contain the same pins as hp_pins[]
depending on the configuration.  When they are identical, detecting the
line_jack_present flag screws up the auto-mute because alc_line_automute()
is called unconditionally at initialization while it won't be triggered
by unsol events, thus the old line_jack_present flag is kept for the
whole run.

For fixing this buggy behavior, the driver needs to check whether the
line-outs are really individual, and skip if same as headphone jacks.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the headphone pin is assigned as primary output to line_out_pins[],
the automatic HP-pin assignment by ASSID must be suppressed.  Otherwise
a wrong pin might be assigned to the headphone and breaks the auto-mute.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

This patch is necessary to make internal speakers work on this chip.

Cc: stable@kernel.org
BugLink: http://bugs.launchpad.net/bugs/854468Tested-by: NAlex Wolfson <alex.wolfson@canonical.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- Add "AD198x Headphone" playback device for independent headphone playback
  while playing 7.1 surround using rear panel audio jacks.

- Remove "6stack-dig-fp" model since "Headphone Playback Volume" control using
  DAC0 instead of DAC1 (HDA_FRONT) was already added to all models.

- Add "Independent HP" switch to enable/disable this playback device.
  When the switch is OFF, headphone use "copy front" mode to get the front
  channel as the green jack.
  When the switch is ON, you can play stereo sound through "AD198x Headphone"
  device to headphone while playing 7.1 surround sound through "AD198x Analog"
  device.
  The switch cannot be changed when either "AD198x Headphone" or "AD198X Analog"
  is open.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit 96760015
("ALSA: fm801: add error handling if auto-detect fails") seems to
break systems that were previously working without a tuner.

As a bonus, this should fix init and cleanup for the case where the
tuner is explicitly disabled.
Reported-and-tested-by: NHor Jiun Shyong <jiunshyong@gmail.com>
References: http://bugs.debian.org/641946Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Cc: stable@kernel.org [v3.0+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit 96760015
("ALSA: fm801: add error handling if auto-detect fails") added
incorrect error handling.

Once we have successfully called snd_device_new(), the cleanup
function fm801_free() will automatically be called by snd_card_free()
and we must *not* also call fm801_free() directly.
Reported-by: NHor Jiun Shyong <jiunshyong@gmail.com>
References: http://bugs.debian.org/641946Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Cc: stable@kernel.org [v3.0+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since modern HDMI cards often have more than one output pin and thus
input device, we need to know which one has actually been plugged in.

This patch adds a name hint that indicates which PCM device is connected
to which pin.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Increase readability and understandability in the automute code.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cc: stable@kernel.org
BugLink: http://bugs.launchpad.net/bugs/854468Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the system has only the headphone and the line-out jacks without
speakers, the current auto-mute code doesn't work.  It's because the
spec->automute_lines flag is wrongly referred in update_speakers().
This flag must be meaningless when spec->automute_hp_lo isn't set, thus
they should be always coupled.

The patch fixes the problem and add a comment to indicate the
relationship briefly.

BugLink: http://bugs.launchpad.net/bugs/851697Reported-by: NDavid Henningsson <david.henningsson@canonical.com>
Tested-By: NJayne Han <jayne.han@canonical.com>
Cc: stable@kernel.org (3.0)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes "Surround Speaker Playback Volume" being cut off.
(Commit b4dabfc4 was probably meant to fix this, but it fixed
only the "Switch" name, not the "Volume" name.)
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recursive search of widget connections in snd_hda_get_conn_index()
must be terminated at the pin and the audio-out widgets.  Otherwise
you'll get "too deep connection" warnings unnecessarily.
Reported-by: NFrancis Moreau <francis.moro@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- use DAC0 instead of DAC1 for Port-A Headphone
- assign 0x03 to spec->multiout.hp_nid except model="6stack-dig-fp"
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Headphones has stopped working for the original reported (a regression
compared to 2.6.38). This is because Speaker and Headphones share the
same DAC, in which case no Headphones volume control was created.
This patch fixes so that both Speaker and Headphones volume
controls are created in such scenario.

BugLink: http://bugs.launchpad.net/bugs/817943Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The rest of ALC662 quirks are only for desktops, and they should work
with the auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since the recent fixes, this device works with the auto-parser well.
Let's kill it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the multi-io jacks are available, parse them first and assign DACs
before parsing speakers and headphones.  This allows a better chance of
surround I/O in some desktops and laptops with limited DACs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 23c09b00
    ALSA: hda - Support multiple speakers by Realtek auto-parser
changes the return value from alc_get_line_out_pfx(), and it breaks
the center/LFE mixer split check.  The caller must test with a string
"CLFE" now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce the pincfg table to patch_conexant.c for fixing up the extra
pin-configuration for auto-parser.  As an example, Lenovo X200 model is
replaced with this new mechanism.  (This also fixes the wrong mixer
elements for docking-station I/O in the previous model quirk
automagically.)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ADC-switching can work also in the auto-mic mode, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These models work now with the BIOS auto-parser, so let's drop them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Similarly like ALC662 asus-mode* models, rewrite the laptop-amic and
dmic models with the static pin-config tables.

Now we can get rid of all alc269_quirks.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Re-implement the asus-mode[1-8] quirks with the pin-config tables.
They are provided in case where BIOS is broken on the device, so it's
not enabled in PCI SSID lookup table.  User needs to specify it via model
option explicitly if the driver doesn't work with the BIOS setup as is.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For supporting both the multiple headphones and the multiple speakers,
add the new field in struct hda_multi_out, and evaluate in the standard
setup functions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Let's remove the rest of ALC861 and ALC861-VD quirks.
If any breakage is found, it can be fixed easily via the pin-config
table update.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

During the cleanup by commit 6727b126,
the specific setups for dallas and hp models, using VREF50 for mic pins,
were lost.  Fixed now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... and add a new bit-flags argument to specify the behavior of the
function.  The older function is kept as is (as a wrapper).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When multiple headphones or speakers are assigned but no individual
DACs are available, the driver should take the first HP/SPK DAC instead
of another primary output.  The patch adds a bit-flag to dac field of
struct pin_dac_pair indicating that it's a slave DAC.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The internal states, jack_present and line_jack_present should be
updated upon unsolicited events even if no automute is set.
Otherwise the wrong state is referred when the automute behavior is
changed by the mixer control.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the headphone or speaker output has no own DAC, initialize the path
using the primary DAC.  Otherwise the path won't be set properly and
can result in the silence.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_hda_get_conn_index() returns a negative value while the current code
stores it in an unsigned int.  It must be stored in a signed integer.
Reported-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently HD-audio driver shows the all error ELD byte as an error
in the kernel message.  This is annoying when the video driver doesn't
set the correct ELD from the beginning. e.g. radeon sends a zero-byte
data, but we still check ELD with the fixed 128 byte as a workaround
for some broken devices, it spews 128-times errors.

For avoiding this, the driver aborts reading when the first byte is
invalid.  In such a case, the whole data is certainly invalid.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In snd_hda_parse_pin_def_config(), we checked the associated number
of speaker pins and accepts only one number exclusively.  But many BIOS
seem to give different assoc number for surround speakers, thus we'd
better to accept all speaker pins no matter which assoc number, and sort
like done for the headphone pins.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the support of multiple speakers by Realtek auto-parser.
When all speaker pins have individual DACs, create each speaker volume
control.  Otherwise, create a bind-volume control for all speaker outs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are confirmed to work with the auto-parser with pincfg fixups.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also update the model description, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are confirmed to work with the auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>