Currently the NVMe target stores the expexted data length in req->data_len
and uses that for data transfer decisions, but that does not take the
actual transfer length in the SGLs into account.  So this adds a new
transfer_len field, into which the transport drivers store the actual
transfer length.  We then check the two match before actually executing
the command.

The FC transport driver already had such a field, which is removed in
favour of the common one.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The 'remove_work' may be scheduled to run after nvme_remove()
returns since we can't simply cancel it in nvme_remove() for
avoiding deadlock. Once nvme_remove() returns, this module(nvme)
can be unloaded.

On the other hand, nvme_put_ctrl() calls ctr->ops->free_ctrl
which may point to nvme_pci_free_ctrl() in unloaded module.

This patch avoids this issue by queuing 'remove_work' via 'nvme_wq',
and flush this worqueue in nvme_exit() as suggested by Sagi.
Suggested-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This will give udev a chance to observe and handle asynchronous event
notifications and clear the log to unmask future events of the same type.
The driver will create a change uevent of the asyncronuos event result
before submitting the next AEN request to the device if a completed AEN
event is of type error, smart, command set or vendor specific,
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NGuan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Async event work is for core use only and should not be called directly
from drivers.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NGuan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The driver can handle tracking only one AEN request, so this patch
removes handling for multiple ones.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJames Smart  <james.smart@broadcom.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This was being saved in a structure, but never used anywhere. The queue
size is obtained through other means, so there's no reason to duplicate
this without a user for it.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NGuan Junxiong <guanjunxiong@huawei.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

All the transports were unnecessarilly duplicating the AEN request
accounting. This patch defines everything in one place.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NGuan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

the status is either success or some status id and
we don't need a local variable for it.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We already allocated the buffer with kzalloc.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Avoid that removal of a request queue sporadically triggers the
following warning:

list_del corruption. next->prev should be ffff8807d649b970, but was 6b6b6b6b6b6b6b6b
WARNING: CPU: 3 PID: 342 at lib/list_debug.c:56 __list_del_entry_valid+0x92/0xa0
Call Trace:
 process_one_work+0x11b/0x660
 worker_thread+0x3d/0x3b0
 kthread+0x129/0x140
 ret_from_fork+0x27/0x40
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix print formatting, but keep the original output to prevent user
breakage as suggested by Joe Perches.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Copy subnqns using NVMF_NQN_SIZE as it is < 256
Signed-off-by: NJavier González <javier@cnexlabs.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We have to put the driver tag if dispatch budget can't be got, otherwise
it might cause IO deadlock, especially in case that size of tags is very
small.

Fixes: de148297(blk-mq: introduce .get_budget and .put_budget in blk_mq_ops)
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use the obvious calling convention.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This helper doesn't buy us much over calling kmap_atomic directly.
In fact in the only caller it does a bit of useless work as the
caller already has the bvec at hand, and said caller would even
buggy for a multi-segment bio due to the use of this helper.

So just remove it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There are no users of it anymore.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This reverts commit 358a3a6b.

We have cases that aren't covered 100% in the drivers, so for now
we have to retain the shared tag restart loops.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

kthread() could bail out early before we initialize blkcg_css (if the
kthread is killed very early. Please see xchg() statement in kthread()),
which confuses free_kthread_struct. Instead of moving the blkcg_css
initialization early, we simply zero the whole 'self' data structure,
which doesn't sound much overhead.
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Fixes: 05e3db95 ("kthread: add a mechanism to store cgroup info")
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

small typos fixed in admin-cmd.c
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

QP object is created using rdma_cm api, therefore the destruction
should use the same api for symmetry.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A NULL deref happens when nvmet_rdma_remove_one() is called more than once
(e.g. while connected via 2 ports).
The first call frees the queues related to the first ib_device but
doesn't remove them from the queue list.
While calling nvmet_rdma_remove_one() for the second ib_device it goes over
the full queue list again and we get the NULL deref.

Fixes: f1d4ef7d ("nvmet-rdma: register ib_client to not deadlock in device removal")
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grmberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch calls the new nvme transport routine for dev_loss_tmo
whenever the SCSI fc transport calls the lldd to make a dynamic
change to a remote ports dev_loss_tmo.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In the lldd api, a lldd may unregister a remoteport (loss of connectivity
or driver unload) or localport (driver unload). The lldd must wait for the
remoteport_delete or localport_delete before completing its actions post
the unregister.  The xxx_deletes currently occur only when the xxxport
structure is fully freed after all references are removed. Thus the lldd
may be held hostage until an app or in-kernel entity that has a namespace
open finally closes so the namespace can be removed, the controller
removed, thus the transport objects, thus the lldd.

This patch decouples the transport and os-facing objects from the lldd
and the remoteport and localport. There is a point in all deletions
where the transport will no longer interact with the lldd on behalf of
a controller. That point centers around the association established
with the target/subsystem. It will access the lldd whenever it attempts
to create an association and while the association is active. New
associations may only be created if the remoteport is live (thus the
localport is live). It will not access the lldd after deleting the
association.

Therefore, the patch tracks the count of active controllers - those with
associations being created or that are active - on a remoteport. It also
tracks the number of remoteports that have active controllers, on a
a localport. When a remoteport is unregistered, as soon as there are no
active controllers, the lldd's remoteport_delete may be called and the
lldd may continue. Similarly, when a localport is unregistered, as soon
as there are no remoteports with active controllers, the localport_delete
callback may be made. This significantly speeds up unregistration with
the lldd.

The transport objects continue in suspended status with reconnect timers
running, and upon expiration, normal ref-counting will occur and the
objects will be freed. The transport object may still be held hostage
by the application/kernel module, but that is acceptable.

With this change, the lldd may be fully unloaded and reloaded, and
if registrations occur prior to the timeouts, the nvme controller and
namespaces will resume normally as if a link bounce.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The localport resume was not updating the lldd ops structure. If the
lldd is unloaded and reloaded, the ops pointers will differ.

Additionally, as there are device references taken by the localport,
ensure that resume only resumes if the device matches as well.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The NVMe standard provides a command effects log page so the host may
be aware of special requirements it may need to do for a particular
command. For example, the command may need to run with IO quiesced to
prevent timeouts or undefined behavior, or it may change the logical block
formats that determine how the host needs to construct future commands.

This patch saves the nvme command effects log page if the controller
supports it, and performs appropriate actions before and after an admin
passthrough command is completed. If the controller does not support the
command effects log page, the driver will define the effects for known
opcodes. The nvme format and santize are the only commands in this patch
with known effects.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

And fix the warning on a successful firmware log.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Update the check in nvme_setup_rw for missing metadata so that it is
together with the other metadata handling, does not contain impossible
to reach conditions and warns if we get an impossible requests for
a (non-PI) metadata-enabled namespace when CONFIG_BLK_DEV_INTEGRITY
is not set.

Also add a little helper that checks if a given metadata configuration
contains protection information
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NJavier González <jg@lightnvm.io>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Split out the code that applies the calculate value to a given disk/queue
into new helper that can be reused by the multipath code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We don't need a frozen queue to update the chunk_size, which just is a
hint, and moving it a little earlier will allow for some better code
reuse with the multipath code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To allow reusing this function for the multipath node.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To allow reusing this function for the multipath node.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is safe because the queue is always frozen when we revalidate, and
it simplifies both the existing code as well as the multipath
implementation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With multipath we don't want a hard DNR bit on a request that is cancelled
by a controller reset, but instead want to be able to retry it on another
patch.  To archive this don't always set the DNR bit when the queue is
dying in nvme_cancel_request, but defer that decision to
nvme_req_needs_retry.  Note that it applies to any command there and not
just cancelled commands, but one the queue is dying that is the right
thing to do anyway.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We need to ensure that tracepoints are registered and unregistered
with the users of them. The existing atomic count isn't enough for
that. Add a lock around the tracepoints, so we serialize access
to them.

This fixes cases where we have multiple users setting up and
tearing down tracepoints, like this:

CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted
4.14.0-rc5-next-20171018+ #36
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:16 [inline]
  dump_stack+0x194/0x257 lib/dump_stack.c:52
  panic+0x1e4/0x41c kernel/panic.c:183
  __warn+0x1c4/0x1e0 kernel/panic.c:546
  report_bug+0x211/0x2d0 lib/bug.c:183
  fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177
  do_trap_no_signal arch/x86/kernel/traps.c:211 [inline]
  do_trap+0x260/0x390 arch/x86/kernel/traps.c:260
  do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297
  do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310
  invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905
RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline]
RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283
RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293
RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07
RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818
RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004
R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0
R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0
  tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304
  register_trace_block_rq_insert include/trace/events/block.h:191 [inline]
  blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043
  do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542
  blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564
  sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089
  vfs_ioctl fs/ioctl.c:45 [inline]
  do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
  SYSC_ioctl fs/ioctl.c:700 [inline]
  SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
  entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x444339
RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339
RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009
RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff
R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000

since we can now run these in parallel. Ensure that the exported helpers
for doing this are grabbing the queue trace mutex.
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Tested-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

sg.c calls into the blktrace functions without holding the proper queue
mutex for doing setup, start/stop, or teardown.

Add internal unlocked variants, and export the ones that do the proper
locking.

Fixes: 6da127ad ("blktrace: Add blktrace ioctls to SCSI generic devices")
Tested-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add usage explanation for a shared_tags, introduced by commit:

82f402fe ("null_blk: add support for shared tags")
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>

Reworded slightly.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

null_blk.c has initial value of
(1) nr_devices as 1.
(2) completion_nsec as 10,000ns, not 10.000ns.
documentation should be updated for fixes above.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We can end up sleeping for a while waiting for the dead timeout, which
means we could get the per request timer to fire.  We did handle this
case, but if the dead timeout happened right after we submitted we'd
either tear down the connection or possibly requeue as we're handling an
error and race with the endio which can lead to panics and other
hilarity.

Fixes: 560bc4b3 ("nbd: handle dead connections")
Cc: stable@vger.kernel.org
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we have a pending signal or the user kills their application then
it'll bring down the whole device, which is less than awesome.  Instead
wait uninterruptible for the dead timeout so we're sure we gave it our
best shot.

Fixes: 560bc4b3 ("nbd: handle dead connections")
Cc: stable@vger.kernel.org
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The idea behind it is simple:

1) for none scheduler, driver tag has to be borrowed for flush rq,
   otherwise we may run out of tag, and that causes an IO hang. And
   get/put driver tag is actually noop for none, so reordering tags
   isn't necessary at all.

2) for a real I/O scheduler, we need not allocate a driver tag upfront
   for flush rq. It works just fine to follow the same approach as
   normal requests: allocate driver tag for each rq just before calling
   ->queue_rq().

One driver visible change is that the driver tag isn't shared in the
flush request sequence. That won't be a problem, since we always do that
in legacy path.

Then flush rq need not be treated specially wrt. get/put driver tag.
This cleans up the code - for instance, reorder_tags_to_front() can be
removed, and we needn't worry about request ordering in dispatch list
for avoiding I/O deadlock.

Also we have to put the driver tag before requeueing.
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>