[akpm@linux-foundation.org: checkpatch fixes]
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prevents hung_task detector from panicing the machine. This is also
needed to prevent this wait from blocking suspend.

(It doesnt' currently block suspend but it would once the next
patch in this series is applied.)

[yongjun_wei@trendmicro.com.cn: kernel/exit.c: remove duplicated include]
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Cc: Ben Chan <benchan@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We shouldn't try_to_freeze if locks are held.  Holding a lock can cause a
deadlock if the lock is later acquired in the suspend or hibernate path
(e.g.  by dpm).  Holding a lock can also cause a deadlock in the case of
cgroup_freezer if a lock is held inside a frozen cgroup that is later
acquired by a process outside that group.

[akpm@linux-foundation.org: export debug_check_no_locks_held]
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Cc: Ben Chan <benchan@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In read_vmcore() two `if' tests are duplicated.  Change the position of
them could reduce the duplication.  This change does not affect the
behaviour of the function.

[akpm@linux-foundation.org: avoid `if (foo = bar)' thing, use min_t()]
[akpm@linux-foundation.org: s/max_t/min_t/]
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- use pr_foo() throughout

- remove a couple of duplicated KERN_WARNINGs, via WARN(KERN_WARNING "...")

- nuke a few warnings which I've never seen happen, ever.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The existing SUID_DUMP_* defines duplicate the newer SUID_DUMPABLE_*
defines introduced in 54b50199 ("coredump: warn about unsafe
suid_dumpable / core_pattern combo").  Remove the new ones, and use the
prior values instead.
Signed-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NChen Gang <gang.chen@asianux.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: James Morris <james.l.morris@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several printk's were missing KERN_INFO and KERN_CONT flags.  In
addition, a printk that was outside a #if/#endif should have been
inside, which would result in stray blank line on non-x86 boxes.
Signed-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The idea is simple.  We need to get the siginfo for each signal on
checkpointing dump, and then return it back on restore.

The first problem is that the kernel doesn't report complete siginfos to
userspace.  In a signal handler the kernel strips SI_CODE from siginfo.
When a siginfo is received from signalfd, it has a different format with
fixed sizes of fields.  The interface of signalfd was extended.  If a
signalfd is created with the flag SFD_RAW, it returns siginfo in a raw
format.

rt_sigqueueinfo looks suitable for restoring signals, but it can't send
siginfo with a positive si_code, because these codes are reserved for
the kernel.  In the real world each person has right to do anything with
himself, so I think a process should able to send any siginfo to itself.

This patch:

The kernel prevents sending of siginfo with positive si_code, because
these codes are reserved for kernel.  I think we can allow a task to
send such a siginfo to itself.  This operation should not be dangerous.

This functionality is required for restoring signals in
checkpoint/restart.
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NWarren Turkal <wt@ooyala.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NShuah Khan <shuah.khan@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no documented methods to mark FAT as dirty.  Unofficially MS
started to use reserved Byte in boot sector for this purpose, at least
since Win 2000.  With Win 7 user is warned if fs is dirty and asked to
clean it.

Different versions of Win, handle it in different ways, but always have
same meaning:

- Win 2000 and XP, set it on write operations and
  remove it after operation was finnished
- Win 7, set dirty flag on first write and remove it on umount.

We will do it as follows:

- set dirty flag on mount. If fs was initially dirty, warn user,
  remember it and do not do any changes to boot sector.
- clean it on umount. If fs was initially dirty, leave it dirty.
- do not do any thing if fs mounted read-only.
- TODO: leave fs dirty if we found some error after mount.
Signed-off-by: NOleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Later we will need "state" field to check if volume was cleanly unmounted.
Signed-off-by: NOleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fsck_hfs (under MacOS X) complains about unzeroed unused b-tree nodes
after deletion of folders' tree under Linux.

SYMPTOMS:

  Running Disk Utiltiy's "Verify Disk" on "test" gives the following:
  Verifying volume “Test”
  Checking file systemChecking Journaled HFS Plus volume.
  Checking extents overflow file.
  Checking catalog file.
  Unused node is not erased (node = 3111)
  Checking multi-linked files.
  Checking catalog hierarchy.
  Checking extended attributes file.
  Checking volume bitmap.
  Checking volume information.
  The volume Test was found corrupt and needs to be repaired.
  Error: This disk needs to be repaired. Click Repair Disk.

REPRODUCING PATH:

1. Prepare HFS+ (non-case sensitive) partition (for example, 5GB)
   under MacOS X.
2. Copy linux kernel source tree (for example, 3.7-rc6 version) on
   this partition under MacOS X.
3. Then switch to Linux and mount this prepared partition.
4. Execute `sudo rm -r` under prepared directory with linux kernel
   source tree.
5. Unmount and boot back into OS X.
6. Open up Disk Utility and verify partition.

REPRODUCIBILITY: 100%

FIX:

It is added code of node clearing in hfs_bnode_put() method for the case
when node has flag HFS_BNODE_DELETED.
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: NKyle Laracey <kalaracey@gmail.com>
Acked-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support of manipulation by attributes file.
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rework functionality of getting, setting and deleting of extended attributes.
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add functionality of manipulating by records in attributes tree.
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add all necessary on-disk layout declarations related to attributes file.
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hfsplus: reworked support of extended attributes.

Current mainline implementation of hfsplus file system driver treats as
extended attributes only two fields (fdType and fdCreator) of user_info
field in file description record (struct hfsplus_cat_file).  It is
possible to get or set only these two fields as extended attributes.
But HFS+ treats as com.apple.FinderInfo extended attribute an union of
user_info and finder_info fields as for file (struct hfsplus_cat_file)
as for folder (struct hfsplus_cat_folder).  Moreover, current mainline
implementation of hfsplus file system driver doesn't support special
metadata file - attributes tree.

Mac OS X 10.4 and later support extended attributes by making use of the
HFS+ filesystem Attributes file B*-tree feature which allows for named
forks.  Mac OS X supports only inline extended attributes, limiting
their size to 3802 bytes.  Any regular file may have a list of extended
attributes.  HFS+ supports an arbitrary number of named forks.  Each
attribute is denoted by a name and the associated data.  The name is a
null-terminated Unicode string.  It is possible to list, to get, to set,
and to remove extended attributes from files or directories.

It exists some peculiarity during getting of extended attributes list by
means of getfattr utility.  The getfattr utility expects prefix "user."
before any extended attribute's name.  So, it ignores any names that
don't contained such prefix.  Such behavior of getfattr utility results
in unexpected empty output of extended attributes list even in the case
when file (or folder) contains extended attributes.  It needs to use
empty string as regular expression pattern for names matching (getfattr
--match="").

For support of extended attributes in HFS+:
1. It was added necessary on-disk layout declarations related to Attributes
   tree into hfsplus_raw.h file.
2. It was added attributes.c file with implementation of functionality of
   manipulation by records in Attributes tree.
3. It was reworked hfsplus_listxattr, hfsplus_getxattr, hfsplus_setxattr
   functions in ioctl.c. Moreover, it was added hfsplus_removexattr method.

This patch:

Add osx.* prefix for handling namespace of Mac OS X extended attributes.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For better code reuse use the newly added page iterator to iterate
through the pages.  The offset, length within the page is still
calculated by the mapping iterator as well as the actual mapping.  Idea
from Tejun Heo.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an iterator to walk through a scatter list a page at a time starting
at a specific page offset.  As opposed to the mapping iterator this is
meant to be small, performing well even in simple loops like collecting
all pages on the scatterlist into an array or setting up an iommu table
based on the pages' DMA address.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The intent is to ensure that all Tegra-related patches are sent to the
linux-tegra@ mailing list, so people can keep up-to-date on all misc
driver changes.

Doing this with a keyword is far simpler and more compact than listing
all Tegra-related drivers, even if wildcards were used.

Words such as integrate or integrator are common.  Ensure the character
right before "tegra" isn't a-z (case-insensitive), to make sure the
keyword doesn't match those.

The only files that the keyword doesn't match are the NVEC driver.  Add
the linux-tegra mailing list to the NVEC entry to solve this.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Cc: Joe Perches <joe@perches.com>
Cc: Julian Andres Klode <jak@jak-linux.org>
Cc: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow K: entries in MAINTAINERS to match directly against filenames;
either those extracted from patch +++ or --- lines, or those specified
on the command-line using the -f option.

This potentially allows fewer lines in a MAINTAINERS entry, if all the
relevant files are scattered throughout the whole kernel tree, yet
contain some common keyword.  An example would be using an ARM SoC name
as the keyword to catch all related drivers.

I don't think setting exact_pattern_match_hash would be appropriate
here; at least for intended Tegra use case, this feature is to ensure
that all Tegra-related driver changes get Cc'd to the Tegra mailing
list.  Setting exact_pattern_match_hash would prevent git history
parsing for e.g.  S-o-b tags, which still seems like it would be useful.
Hence, this flag isn't set.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__orderly_poweroff() does argv_free() if call_usermodehelper_fns()
returns -ENOMEM.  As Lucas pointed out, this can be wrong if -ENOMEM was
not triggered by the failing call_usermodehelper_setup(), in this case
both __orderly_poweroff() and argv_cleanup() can do kfree().

Kill argv_cleanup() and change __orderly_poweroff() to call argv_free()
unconditionally like do_coredump() does.  This info->cleanup() is not
needed (and wrong) since 6c0c0d4d "fix bug in orderly_poweroff() which
did the UMH_NO_WAIT => UMH_WAIT_EXEC change, we can rely on the fact
that CLONE_VFORK can't return until do_execve() succeeds/fails.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: hongfeng <hongfeng@marvell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the frv arch_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ocfs2_block_group_alloc_discontig() disables chain relink by setting
ac->ac_allow_chain_relink = 0 because it grabs clusters from multiple
cluster groups.

It doesn't keep the credits for all chain relink,but
ocfs2_claim_suballoc_bits overrides this in this call trace:
ocfs2_block_group_claim_bits()->ocfs2_claim_clusters()->
__ocfs2_claim_clusters()->ocfs2_claim_suballoc_bits()
ocfs2_claim_suballoc_bits set ac->ac_allow_chain_relink = 1; then call
ocfs2_search_chain() one time and disable it again, and then we run out
of credits.

Fix is to allow relink by default and disable it in
ocfs2_block_group_alloc_discontig.

Without this patch, End-users will run into a crash due to run out of
credits, backtrace like this:

  RIP: 0010:[<ffffffffa0808b14>]  [<ffffffffa0808b14>]
  jbd2_journal_dirty_metadata+0x164/0x170 [jbd2]
  RSP: 0018:ffff8801b919b5b8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff88022139ddc0 RCX: ffff880159f652d0
  RDX: ffff880178aa3000 RSI: ffff880159f652d0 RDI: ffff880087f09bf8
  RBP: ffff8801b919b5e8 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000001e00 R11: 00000000000150b0 R12: ffff880159f652d0
  R13: ffff8801a0cae908 R14: ffff880087f09bf8 R15: ffff88018d177800
  FS:  00007fc9b0b6b6e0(0000) GS:ffff88022fd40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 000000000040819c CR3: 0000000184017000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process dd (pid: 9945, threadinfo ffff8801b919a000, task ffff880149a264c0)
  Call Trace:
    ocfs2_journal_dirty+0x2f/0x70 [ocfs2]
    ocfs2_relink_block_group+0x111/0x480 [ocfs2]
    ocfs2_search_chain+0x455/0x9a0 [ocfs2]
    ...
Signed-off-by: NXiaowei.Hu <xiaowei.hu@oracle.com>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to re-initialize the security for a new reflinked inode with its
parent dirs if it isn't specified to be preserved for ocfs2_reflink().
However, the code logic is broken at ocfs2_init_security_and_acl()
although ocfs2_init_security_get() succeed.  As a result,
ocfs2_acl_init() does not involked and therefore the default ACL of
parent dir was missing on the new inode.

Note this was introduced by 9d8f13ba ("security: new
security_inode_init_security API adds function callback")

To reproduce:

    set default ACL for the parent dir(ocfs2 in this case):
    $ setfacl -m default:user:jeff:rwx ../ocfs2/
    $ getfacl ../ocfs2/
    # file: ../ocfs2/
    # owner: jeff
    # group: jeff
    user::rwx
    group::r-x
    other::r-x
    default:user::rwx
    default:user:jeff:rwx
    default:group::r-x
    default:mask::rwx
    default:other::r-x

    $ touch a
    $ getfacl a
    # file: a
    # owner: jeff
    # group: jeff
    user::rw-
    group::rw-
    other::r--

Before patching, create reflink file b from a, the user
default ACL entry(user:jeff:rwx)was missing:

    $ ./ocfs2_reflink a b
    $ getfacl b
    # file: b
    # owner: jeff
    # group: jeff
    user::rw-
    group::rw-
    other::r--

In this case, the end user can also observed an error message at syslog:

  (ocfs2_reflink,3229,2):ocfs2_init_security_and_acl:7193 ERROR: status = 0

After applying this patch, create reflink file c from a:

    $ ./ocfs2_reflink a c
    $ getfacl c
    # file: c
    # owner: jeff
    # group: jeff
    user::rw-
    user:jeff:rwx			#effective:rw-
    group::r-x			#effective:r--
    mask::rw-
    other::r--

Test program:
/* Usage: reflink <source> <dest> */
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>

static int
reflink_file(char const *src_name, char const *dst_name,
	     bool preserve_attrs)
{
	int fd;

#ifndef REFLINK_ATTR_NONE
#  define REFLINK_ATTR_NONE 0
#endif
#ifndef REFLINK_ATTR_PRESERVE
#  define REFLINK_ATTR_PRESERVE 1
#endif
#ifndef OCFS2_IOC_REFLINK
	struct reflink_arguments {
		uint64_t old_path;
		uint64_t new_path;
		uint64_t preserve;
	};

#  define OCFS2_IOC_REFLINK _IOW ('o', 4, struct reflink_arguments)
#endif
	struct reflink_arguments args = {
		.old_path = (unsigned long) src_name,
		.new_path = (unsigned long) dst_name,
		.preserve = preserve_attrs ? REFLINK_ATTR_PRESERVE :
					     REFLINK_ATTR_NONE,
	};

	fd = open(src_name, O_RDONLY);
	if (fd < 0) {
		fprintf(stderr, "Failed to open %s: %s\n",
			src_name, strerror(errno));
		return -1;
	}

	if (ioctl(fd, OCFS2_IOC_REFLINK, &args) < 0) {
		fprintf(stderr, "Failed to reflink %s to %s: %s\n",
			src_name, dst_name, strerror(errno));
		return -1;
	}
}

int
main(int argc, char *argv[])
{
	if (argc != 3) {
		fprintf(stdout, "Usage: %s source dest\n", argv[0]);
		return 1;
	}

	return reflink_file(argv[1], argv[2], 0);
}
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Reviewed-by: NTao Ma <boyu.mt@taobao.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ef5da59f ("scripts/kernel-doc: handle struct member
__aligned") permits "char something [123] __aligned(8);".

However, by using \d we constraint ourselves with integers.  This is not
always the case.  In fact, it might be better to do char something[123]
__aligned(sizeof(u16));

For example, With wireless_dev defining:

    u8 address[ETH_ALEN] __aligned(sizeof(u16));

With \d, scripts/kernel-doc erroneously says:

    Warning(include/net/cfg80211.h:2618): Excess struct/union/enum/typedef member 'address' description in 'wireless_dev'

This is because the regex __aligned\s*\(\d+\) fails match at \d as
sizeof is used.

So replace \d with .  to indicate "something" in kernel-doc to ignore
__aligned(SOMETHING) in structs.  With this change, we can use integers
OR sizeof() or macros as we please.
Signed-off-by: NNishanth Menon <nm@ti.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

munlock_vma_pages_range() was always incrementing addresses by PAGE_SIZE
at a time.  When munlocking THP pages (or the huge zero page), this
resulted in taking the mm->page_table_lock 512 times in a row.

We can do better by making use of the page_mask returned by
follow_page_mask (for the huge zero page case), or the size of the page
munlock_vma_page() operated on (for the true THP page case).
Signed-off-by: NMichel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight
dri= ver and current sinks.  This patch enables LP8788 backlight module.

(Brightness mode)
The brightness is controlled by PWM input or I2C register.
All modes are supported in the driver.

(Platform data)
Configurable data can be defined in the platform side.
 name                  : backlight driver name. (default: "lcd-backlight")
 initial_brightness    : initial value of backlight brightness
 bl_mode               : brightness control by PWM or lp8788 register
 dim_mode              : dimming mode selection
 full_scale            : full scale current setting
 rise_time             : brightness ramp up step time
 fall_time             : brightness ramp down step time
 pwm_pol               : PWM polarity setting when bl_mode is PWM based
 period_ns             : platform specific PWM period value. unit is nano.

The default values are set in case no platform data is defined.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: "devendra.aaru" <devendra.aaru@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A misplaced #endif causes link errors related to pcim_*() functions.

This is because pcim_*() functions are related to CONFIG_PCI option,
however these are not related to CONFIG_HAS_IOPORT option.  Therefore,
when CONFIG_PCI is enabled and CONFIG_HAS_IOPORT is not enabled, it makes
link errors related to pcim_*() functions as below:

drivers/ata/libata-sff.c:3233: undefined reference to `pcim_iomap_regions'
drivers/ata/libata-sff.c:3238: undefined reference to `pcim_iomap_table'
drivers/built-in.o: In function `ata_pci_sff_init_host':
drivers/ata/libata-sff.c:2318: undefined reference to `pcim_iomap_regions'
drivers/ata/libata-sff.c:2329: undefined reference to `pcim_iomap_table
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Greg KH <greg@kroah.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the parisc arch_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.

[akpm@linux-foundation.org: remove now-unused DCACHE_ALIGN(), per James]
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Acked-by: NHelge Deller <deller@gmx.de>
Tested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch makes power_on() call optional.  The voltage source can be
provided to some boards using ams369fg06 panel, thus in this case, power
on/off sequence is not necessary.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the ClearPage/SetPage/TestClearPage/TestSetPage variants to the not
reported Page CamelCase variables.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When taking an address of an extern array, gcc quite naturally should be
able to say "an address of an object can never be NULL" and just
optimize away the test entirely.

However, the new alternate sysrq reset code (commit 154b7a48:
"Input: sysrq - allow specifying alternate reset sequence") did exactly
that, and declared platform_sysrq_reset_seq[] as a weak array, and
expecting that testing the address of the array would show whether it
actually got linked against something or not.

And that doesn't work with all gcc versions.  Clearly it works with
*some* versions of gcc, and maybe it's even supposed to work, but it
really is a very fragile concept.

So instead of testing the address of the weak variable, just create a
weak instance of that array that is empty.  If some platform then has a
real platform_sysrq_reset_seq[] that overrides our weak one, the linker
will switch to that one, and it all works without any run-time
conditionals at all.
Reported-by: NDave Airlie <airlied@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The stack vma is designed to grow automatically (marked with VM_GROWSUP
or VM_GROWSDOWN depending on architecture) when an access is made beyond
the existing boundary.  However, particularly if you have not limited
your stack at all ("ulimit -s unlimited"), this can cause the stack to
grow even if the access was really just one past *another* segment.

And that's wrong, especially since we first grow the segment, but then
immediately later enforce the stack guard page on the last page of the
segment.  So _despite_ first growing the stack segment as a result of
the access, the kernel will then make the access cause a SIGSEGV anyway!

So do the same logic as the guard page check does, and consider an
access to within one page of the next segment to be a bad access, rather
than growing the stack to abut the next segment.
Reported-and-tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...

Pull xtensa update from Chris Zankel:
 "Added features:
   - add support for thread local storage (TLS)

   - add accept4 and finit_module syscalls

   - support medium-priority interrupts

   - add support for dc232c processor variant

   - support file-base simulated disk for ISS simulator

  Bug fixes:

   - fix return values returned by the str[n]cmp functions

   - avoid mmap cache aliasing

   - fix handling of 'windowed registers' in ptrace"

* tag 'xtensa-next-20130225' of git://github.com/czankel/xtensa-linux:
  xtensa: add accept4 syscall
  xtensa: add support for TLS
  xtensa: add missing include asm/uaccess.h to checksum.h
  xtensa: do not enable GENERIC_GPIO by default
  xtensa: complete ptrace handling of register windows
  xtensa: add support for oprofile
  xtensa: move spill_registers to traps.h
  xtensa: ISS: add host file-based simulated disk
  xtensa: fix str[n]cmp return value
  xtensa: avoid mmap cache aliasing
  xtensa: add finit_module syscall
  xtensa: pull signal definitions from signal-defs.h
  xtensa: fix ipc_parse_version selection
  xtensa: dispatch medium-priority interrupts
  xtensa: Add config files for Diamond 233L - Rev C processor variant
  xtensa: use new common dtc rule
  xtensa: rename prom_update_property to of_update_property

Pull microblaze update from Michal Simek:
 "Microblaze changes.

  After my discussion with Arnd I have also added there asm-generic io
  patch which is Acked by him and Geert."

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  asm-generic: io: Fix ioread16/32be and iowrite16/32be
  microblaze: Do not use module.h in files which are not modules
  microblaze: Fix coding style issues
  microblaze: Add missing return from debugfs_tlb
  microblaze: Makefile clean
  microblaze: Add .gitignore entries for auto-generated files
  microblaze: Fix strncpy_from_user macro

Pull OpenRISC updates from Jonas Bonn:
 "An equal number of bug fixes and trivial cleanups; no new features.

   - Two patches to fix errors thrown by the updated toolchain.

   - Three other bug fixes.

   - Four trivial cleanups."

* 'for-upstream' of git://openrisc.net/jonas/linux:
  openrisc: add missing header inclusion
  openrisc: really pass correct arg to schedule_tail
  Add bitops include needed for ext2 filesystem
  openrisc: update DTLB-miss handler last
  openrisc: fix up vmalloc page table loading
  openrisc idle: delete pm_idle
  openrisc: remove CONFIG_SYMBOL_PREFIX
  openrisc: avoid using function parameter regs in reset vector
  openrisc: remove unused current_regs