We clean up a failed VMREAD by clearing the output register.  Do
it in the exception handler instead of unconditionally.  This is
worthwhile since there are more than a hundred call sites.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Dereference it in the actual users.

This not only cleans up the emulator but also makes it easy to convert
the old emulation functions to the new em_xxx() form later.

Note: Remove some inline keywords to let the compiler decide inlining.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Dereference it in the actual users: only do_insn_fetch_byte().

This is consistent with the way __linearize() dereferences it.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The two macros need special care to use:
  Assume rc, ctxt, ops and done exist outside of them.
  Can goto outside.

Considering the fact that these are used only in decode functions,
moving these right after do_insn_fetch() seems to be a right thing
to improve the readability.

We also rename do_fetch_insn_byte() to do_insn_fetch_byte() to be
consistent.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

%rip-relative addressing is relative to the first byte of the next instruction,
so we need to add %rip only after we've fetched any immediate bytes.

Based on original patch by Li Xin <xin.li@intel.com>.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Acked-by: NLi Xin <xin.li@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The condition is opposite, it always maps huge page for the dirty tracked page
Reported-by: NSteve <stefan.bosak@gmail.com>
Signed-off-by: NSteve <stefan.bosak@gmail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Only decache guest CR3 value if vcpu->arch.cr3 is stale.
Fixes loadvm with live guest.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Tested-by: NMarkus Schade <markus.schade@gmail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

On 3.0-rc1 I get

In file included from arch/x86/kvm/mmu.c:2856:
arch/x86/kvm/paging_tmpl.h: In function ‘paging32_walk_addr_generic’:
arch/x86/kvm/paging_tmpl.h:124: warning: ‘ptep_user’ may be used uninitialized in this function
In file included from arch/x86/kvm/mmu.c:2852:
arch/x86/kvm/paging_tmpl.h: In function ‘paging64_walk_addr_generic’:
arch/x86/kvm/paging_tmpl.h:124: warning: ‘ptep_user’ may be used uninitialized in this function

caused by 6e2ca7d1. According to Takuya
Yoshikawa, ptep_user won't be used uninitialized so shut up gcc.

Cc: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Link: http://lkml.kernel.org/r/20110530094604.GC21833@liondog.tnicSigned-off-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Commit f6511935 moved the permission check for io instructions
to the ->check_perm callback. It failed to copy the port value from RDX
register for string and "in,out ax,dx" instructions.

Fix it by reading RDX register at decode stage when appropriate.

Fixes FC8.32 installation.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Change each shrinker's API by consolidating the existing parameters into
shrink_control struct.  This will simplify any further features added w/o
touching each file of shrinker.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: fix warning]
[kosaki.motohiro@jp.fujitsu.com: fix up new shrinker API]
[akpm@linux-foundation.org: fix xfs warning]
[akpm@linux-foundation.org: update gfs2]
Signed-off-by: NYing Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Acked-by: NPavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The address of the gpte was already calculated and stored in ptep_user
before entering cmpxchg_gpte().

This patch makes cmpxchg_gpte() to use that to make it clear that we
are using the same address during walk_addr_generic().

Note that the unlikely annotations are used to show that the conditions
are something unusual rather than for performance.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We introduce em_jmp_far().

We also call this from em_grp45() to stop treating modrm_reg == 5 case
separately in the group 5 emulation.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The prototypes are changed appropriately.

We also replaces "goto grp45;" with simple em_grp45() call.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The opt of emulate_grp1a() is also removed.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Remove inline at this chance.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In addition, one comma at the end of a statement is replaced with a
semicolon.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This way, we can avoid checking the user space address many times when
we read the guest memory.

Although we can do the same for write if we check which slots are
writable, we do not care write now: reading the guest memory happens
more often than writing.

[avi: change VERIFY_READ to VERIFY_WRITE]
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When we optimized walk_addr_generic() by not using the generic guest
memory reader, we replaced copy_from_user() with get_user():

  commit e30d2a170506830d5eef5e9d7990c5aedf1b0a51
  KVM: MMU: Optimize guest page table walk

  commit 15e2ac9a43d4d7d08088e404fddf2533a8e7d52e
  KVM: MMU: Fix 64-bit paging breakage on x86_32

But as Andi pointed out later, copy_from_user() does the same as
get_user() as long as we give a constant size to it.

So we use copy_from_user() to clean up the code.

The only, noticeable, regression introduced by this is 64-bit gpte
reading on x86_32 hosts needed for PAE guests.

But this can be mitigated by implementing 8-byte get_user() for x86_32,
if needed.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since the emulator now checks segment limits and access rights, it
generates a lot more accesses to the vmcs segment fields.  Undo some
of the performance hit by cacheing those fields in a read-only cache
(the entire cache is invalidated on any write, or on guest exit).
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of separate accessors for the segment selector and cached descriptor,
use one accessor for both.  This simplifies the code somewhat.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Avoids a VMREAD.
Signed-off-by: NAvi Kivity <avi@redhat.com>

dump_vmcb isn't used outside this module, make it static.
Shrink text and object by ~1% by standardizing formats.

$ size arch/x86/kvm/svm.o*
   text	   data	    bss	    dec	    hex	filename
  52910	    580	  10072	  63562	   f84a	arch/x86/kvm/svm.o.new
  53563	    580	  10072	  64215	   fad7	arch/x86/kvm/svm.o.old
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Fix regression introduced by
  commit e30d2a170506830d5eef5e9d7990c5aedf1b0a51
  KVM: MMU: Optimize guest page table walk

On x86_32, get_user() does not support 64-bit values and we fail to
build KVM at the point of 64-bit paging.

This patch fixes this by using get_user() twice for that condition.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Reported-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The CPUIDs for Centaur are added, and then the features of
PadLock hardware engine on VIA CPU, such as "ace", "ace_en"
and so on, can be passed into the kvm guest.
Signed-off-by: NBrilly Wu <brillywu@viatech.com.cn>
Signed-off-by: NKary Jin <karyjin@viatech.com.cn>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

mmio_index should be taken into account when copying data from
userspace.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Remove unused variable mmio_fault_cr2.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Move all groups into a single field and handle them in a single place.  This
saves bits when we add more group types (3 bits -> 7 groups types).
Signed-off-by: NAvi Kivity <avi@redhat.com>

walk_addr_generic() is a hot path and is also hard for the cpu to predict -
some of the parameters (fetch_fault in particular) vary wildly from
invocation to invocation.

Add unlikely() annotations where appropriate; all walk failures are
considered unlikely, as are cases where we have to mark the accessed or
dirty bit, as they are slow paths both in kvm and on real processors.
Signed-off-by: NAvi Kivity <avi@redhat.com>

For this, em_pushf/popf() are introduced.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

For this, emulate_pusha/popa() are converted to em_pusha/popa().
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In addition, the RET emulation is changed to call em_pop() to remove
the pop_instruction label.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The following instructions are changed to use opcode::execute.

Group 1 (80-83)
  ADD (00-05), OR (08-0D), ADC (10-15), SBB (18-1D), AND (20-25),
  SUB (28-2D), XOR (30-35), CMP (38-3D)

CMPS (A6-A7), SCAS (AE-AF)

The last two do the same as CMP in the emulator, so em_cmp() is used.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch optimizes the guest page table walk by using get_user()
instead of copy_from_user().

With this patch applied, paging64_walk_addr_generic() has become
about 0.5us to 1.0us faster on my Phenom II machine with NPT on.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

By reserving 0 as an invalid x86_intercept_stage, we no longer
need to store a valid flag in x86_intercept_map.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

While it isn't defined, no need to force a #UD.  If it becomes defined
in the future this can cause wierd problems for the guest.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>