This patch adds support for the RDC R-321x system-on-chip,
also known as R-861x-(G). It uses the generic GPIO API and
has support for the on-chip hardware watchdog.

Build-fix from: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch defines the PCI identifiers found in
the RDC R-321x System-on-Chip.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds the generic GPIO support to the x86
architecture. We do the same as for MIPS, we let
the machine override the gpio callbacks and provide
defaults one in mach-generic.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The existing Geode GPIO API only allows for updating one GPIO at once.  There
are instances where users want to update multiple GPIOs at once.  With the
current API, they are given two choices; either ignore the GPIO API:

      outl(0xc000, gpio_base + GPIO_OUTPUT_VAL);
      outl(0xc000, gpio_base + GPIO_OUTPUT_ENABLE);

Alternatively, call each GPIO update separately:

      geode_gpio_set(14, GPIO_OUTPUT_VAL);
      geode_gpio_set(15, GPIO_OUTPUT_VAL);
      geode_gpio_set(14, GPIO_OUTPUT_ENABLE);
      geode_gpio_set(15, GPIO_OUTPUT_ENABLE);

Neither are desirable.  This patch changes the GPIO API to allow for setting
of multiple GPIOs at once; rather than being passed an integer, we pass
a bitmask and provide a translation function.  The above code would now
look like this:

      geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_VAL);
      geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_ENABLE);

Since there are no upstream users of the GPIO API yet (afaik), best to
change this now.  This also adds a bit of sanity checking; it is no
longer possible to use a GPIO above 28.

Note the semantics of geode_gpio_isset() have changed:
geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...)
will only return true iff both GPIOs are set.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix cpu MHz reporting for AMD family 0x11 when powernow-k8 is
disabled.

Just adhere to the CONSTANT_TSC feature bit for AMD CPUs when deciding
whether cpu_khz needs calibration. The additional check for CPU family
is not needed and prevents calibration for future CPUs.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

improve the MTTR trimming messages and also trigger a WARN_ON()
so that kerneloops.org can pick it up and categorize it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

I found a small bug of NUMA emulation code for x86_64. (CONFIG_NUMA_EMU)
If machine is non-NUMA, find_node_by_addr() should return
NUMA_NO_NODE, but current implementation code returns existent maximum
NUMA node number + 1.
This is not existent NUMA node number.

However, this behaviour does not affect NUMA emulation fortunately, because
acpi_fake_nodes() that is caller of find_node_by_addr() gets pxm
(proximity domain) by node_to_pxm() from non-existent NUMA node number
that was returned by find_node_by_addr().
node_to_pxm() returns PXM_INVAL that means illegal or non-existent
NUMA node number.
Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The function __cpufreq_set_policy in file drivers/cpufreq/cpufreq.c
has a very obvious error:

        if (policy->min > data->min && policy->min > policy->max) {
                ret = -EINVAL;
                goto error_out;
        }

This condtion statement is wrong because it returns -EINVAL only if
policy->min is greater than policy->max (in this case,
"policy->min > data->min" is true for ever.). In fact, it should
return -EINVAL as well if policy->max is less than data->min.

The correct condition should be:

	if (policy->min > data->max || policy->max < data->min) {

The following test result testifies the above conclusion:

Before applying this patch:

[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
2394000 1596000
[root@yangyi-dev /]# echo 1596000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
1596000
[root@yangyi-dev /]# echo "2000000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
1596000
[root@yangyi-dev /]# echo "0" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@yangyi-dev /]# echo "1595000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@yangyi-dev /]#

After applying this patch:

[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
2394000 1596000
[root@yangyi-dev /]# echo 1596000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
1596000
[root@localhost /]# echo "2000000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
-bash: echo: write error: Invalid argument
[root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
1596000
[root@localhost /]# echo "0" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
-bash: echo: write error: Invalid argument
[root@localhost /]# echo "1595000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
-bash: echo: write error: Invalid argument
[root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@localhost /]# echo "1596000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@localhost /]# echo "2394000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
2394000
[root@localhost /]
Signed-off-by: NYi Yang <yi.y.yang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Both of these references to cpu_to_node() can potentially occur
before the "late" cpu_to_node map is setup.  Therefore, they
should be changed to use early_cpu_to_node().
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The new "mfgptfix" boot command line option may be usd to fix MFGPT
timers on AMD Geode platforms when the BIOS has incorrectly applied
a workaround. TinyBIOS version 0.98 is known to be affected, 0.99
fixes the problem by letting the user disable the workaround.
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

No one uses struct cpu_model_info on x86_64 now.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use KSYM_NAME_LEN instead of numeric value
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NYinghai Lu <yinghai@sun.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

when MTRRs are not covering the whole e820 table, we need to trim the
RAM and need to update e820.

reuse some code on 64-bit as well.

here need to add early_get_cap and use it in early_cpu_detect, and move
mtrr_bp_init early.

The code successfully trimmed the memory map on Justin's system:

from:

 [    0.000000]  BIOS-e820: 0000000100000000 - 000000022c000000 (usable)

to:

 [    0.000000]   modified: 0000000100000000 - 0000000228000000 (usable)
 [    0.000000]   modified: 0000000228000000 - 000000022c000000 (reserved)

According to Justin it makes quite a difference:

|  When I boot the box without any trimming it acts like a 286 or 386,
|  takes about 10 minutes to boot (using raptor disks).
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Tested-by: NJustin Piszcz <jpiszcz@lucidpixels.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

fix kconfig text and make DEBUG_RODATA default.

this helps debugging quite a bit.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

With this, the paravirt_ops code can be enabled on x86_64 also.

Each guest implementation (Xen, VMI, lguest) now depends on X86_32. The
dependencies can be dropped for each one when they start to support
x86_64.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This will allow people to enable the paravirt_ops code even when no
guest support is enabled, for broader testing of the paravirt_ops code.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

ibcs2 support has never been supported on 2.6 kernels as far as I know,
and if it has it must have been an external patch.  Anyways, if anybody
applies an external patch they could as well readd the ibcs checking
code to the ELF loader in the same patch.  But there is no reason to
keep this code running in all Linux kernels.  This will save at least
two strcmps each ELF execution.

No deprecation period because it could not have been used anyway.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

the previous patch in the old RTC driver.  It also removes the direct
rtc_interrupt() call from arch/x86/kernel/hpetc.c so that there's finally no
(code) dependency to CONFIG_RTC in arch/x86/kernel/hpet.c.

Because of this, it's possible to compile the drivers/char/rtc.ko driver as
module and still use the HPET emulation functionality.  This is also expressed
in Kconfig.
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Robert Picco <Robert.Picco@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

enabled, then interrupts don't work for the rtc-cmos driver which results in
RTC_AIE*, RTC_PIE* and RTC_ALM being unusable.  This affects hwclock from
util-linux-ng at least on i386 since that uses RTC_PIE_ON.  (For x86-64, a
polling method is used for unknown reasons.)

This patch series now

  1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc
     driver uses to work around that problem,

  2. makes it possible to compile the old rtc driver as module, while still
     having CONFIG_HPET_EMULATE_RTC enabled and

  3. makes use of the exported functions in (1) in the new rtc-cmos driver.

This patch:

This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable
for kernel modules. It

  - exports the functions (EXPORT_SYMBOL_GPL()),
  - adds an interface to register the interrupt callback function
    instead of using only a fixed callback function and
  - replaces the rtc_get_rtc_time() function which depends on
    CONFIG_RTC with a call to get_rtc_time() which is defined in
    include/asm-generic/rtc.h.

The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is
removed by the next patch. After this, there's no (code) dependency of
this functions to CONFIG_RTC=y any more.
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Robert Picco <Robert.Picco@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

fix:

> WARNING: vmlinux.o(.data+0x4): Section mismatch: reference to .init.text:lguest_entry (between 'subarch_entries' and 'stack_start')
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

I am preparing to convert the boot time page table to the kernels
native format.  To achieve that I need to enable PAE. Enabling PSE
and the no execute bit would not hurt.  So this patch modifies
the boot cpu path to execute all of the kernels enable code
if and only if we have the proper bits set in mmu_cr4_features.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Currently in head_32.S there are two ways we test to see if we
are the boot cpu.  By looking at %ebx and by looking at the
static variable ready.  When changing things around I have
found that it gets tricky to preserve %ebx.  So this
patch just switches head.S over to the more reliable
test of always using ready.

Hopefully later we can kill these tests entirely.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Change the size of node ids for X86_64 from u8 to s16 to
accomodate more than 32k nodes and allow for NUMA_NO_NODE
(-1) to be sign extended to int.

Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The FLATMEM memory model references a global mem_map and max_mapnr. This
is incompatible with how memory models used for NUMA view the world.
Builds fail if FLATMEM && NUMA are set on x86. This patch forbids that
combination of config items. This is consistent with x86_64
enforcements.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The DISCONTIG memory model on x86 32 bit uses a remap allocator early
in boot. The objective is that portions of every node are mapped in to
the kernel virtual area (KVA) in place of ZONE_NORMAL so that node-local
allocations can be made for pgdat and mem_map structures.

With SPARSEMEM, the amount that is set aside is insufficient for all the
mem_maps to be allocated. During the boot process, it falls back to using
the bootmem allocator. This breaks assumptions that SPARSEMEM makes about
the layout of the mem_map in memory and results in a VM_BUG_ON triggering
due to pfn_to_page() returning garbage values.

This patch only enables the remap allocator for use with DISCONTIG.

Without SRAT support, a compile-error occurs because ACPI table parsing
functions are only available in x86-64. This patch also adds no-op stubs
and prints a warning message. What likely needs to be done is sharing
the table parsing functions between 32 and 64 bit if they are
compatible.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Small fomatting fixes to 64-bit as well, trailing whitespace
and extra semicolon, also move the ifdefs for CONFIG_KALLSYMS
into the function itself.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

call early_cpu_to_node() since per_cpu(cpu_to_node_map) might not be setup
yet.

I also had to export x86_cpu_to_node_map_early_ptr because of some calls
from the network code to numa_node_id():

	net/ipv4/netfilter/arp_tables.c:
	net/ipv4/netfilter/ip_tables.c:
	net/ipv4/netfilter/ip_tables.c:
Signed-off-by: NMike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We are driving a motherboard port so use a 2uS explicit delay at this
point.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

additional section for .init.text appending a number.

A side effect of this was a section mismatch warning because modpost did
not recognize a .init.text section named .init.text.1: WARNING:
vmlinux.o(.text.head+0x247): Section mismatch: reference to
.init.text.1:start_kernel (between 'is386' and 'check_x87')

Fix this by hardcoding the "ax" in the pushsection.  Thanks to Torlaf for
reporting this.

Alan Modra provided the hint that made me able to locate the root cause of
this warning.  And Mike Frysinger told me how to properly fix it using
__INIT/__FINIT.

Fix following Section mismatch warning in addition:
WARNING: vmlinux.o(.text+0x14c8): Section mismatch: reference to .init.data:vsyscall_int80_start (between 'fiddle_vdso' and 'xen_setup_features')

fiddle_vdso was only used from a __init function - so declare it __init.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

export __supported_pte_mask variable as GPL symbol.
lguest is a user of it.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Exporrt check_tsc_unstable function as GPL symbol. lguest is
a user of it.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

One of the generated files was missed in gitignore.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>