BIOS on Mac Mini Core2 Duo sets both INPUT and OUTPUT pinctl bits to
the line-in jack, and it confuses the driver as if it's a valid input.
This patch adds the check of OUTPUT bit so that the driver fixes the
invalid pin setup.
Tested-by: NTino Keitel <tino.keitel@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current ad1884a-mobile model has a problem that the speaker output
doesn't work sometimes after boot or power-saving on some HP laptops.
It seems that the verbs accessing to the non-functional widgets cause
this problem.

This patch simplifies the init verbs for mobile model not to touch
unnecessary setups so that it avoids the speaker-mute problem.

Reference: Novell bnc#495668
	https://bugzilla.novell.com/show_bug.cgi?id=495668Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a quirk (model=m51va) for Packard Bell RS65 with ALC663.

Reference: Novell bnc#496787
	https://bugzilla.novell.com/show_bug.cgi?id=496787Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- Support ASUS F81Se F5Q P80 U20A U80 U50 UX50 for ALC269
- Support ASUS F70SL UX20 X58LE F50Z N80Vc N81Te N505Tp Vx3V N5051A
  for ALC663
- Support DELL ZM1 for ALC272
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't unmute unneeded amps for input mixers of ALC662 & co.
It caused possible recording noises.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

(Re)set function_id only from the value on FG nodes.
The current code overrides the value with the last widget.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the upper-limit of mixer amp for AD1884A-laptop model just like
the mobile model for some HP laptops.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the headphone can have no unique DAC, the current code doesn't
check the HP-detection although it should.  Put the hp-detection check
before the DAC check to fix this bug.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit fa00e046
added a new bitfield not adjacent to other
bitfields in the same struct.  Moved the new one.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the key value generation for get/set amp verbs.  The upper bits of
the parameter have to be combined with the verb value to be unique for
each direction/index of amp access.

This fixes the resume problem on some hardwares like Macbook after
the channel mode is changed.
Tested-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the models for quirk bitmask 1734:110x and 1734:113x of
Fujitsu laptops.

This will fix the model detection for Amilo Xa3540.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't call snd_jack_report at release of sigmatel and conexnat codecs
which results in Oops at unloading the module.

The Oops is triggered by the power-up sequence during the free due to
the pincfg restoration.  Since the power-up sequence is involved with
the unsol handling, the jack reporting may be issued during that.
The Oops occurs with this jack reporting because the jack instances
have been already released but the codec doesn't do the proper
book-keeping.

This patch adds the book-keeping of jack instances to avoid the access
to bogus pointers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is the second go through of the old DMA_nBIT_MASK macro,and there're not
so many of them left,so I put them into one patch.I hope this is the last round.
After this the definition of the old DMA_nBIT_MASK macro could be removed.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg KH <greg@kroah.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I found two issues with ICH7-M (it should be related to other HDA chipsets
as well):

- the ring buffer position is not reset when stream restarts (after xrun) -
  solved by moving azx_stream_reset() call from open() to prepare() callback
  and reset posbuf to zero (it might be filled with hw later than position()
  callback is called)
- irq_ignore flag should be set also when ring buffer memory area is not
  changed in prepare() callback - this patch replaces irq_ignore with
  more universal check based on jiffies clock
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add powerdown sequence for VREF using a shared jack when the headphone
is present and the microphone isn't on.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC889 has two SPDIF outputs: 0x06, 0x10. Board vendors can use either or both.
DX58SO uses 0x10, but the driver assumes 0x06. The safe solution is to add
0x10 as slave output to the existing 0x06.
Reported-by: NJeroen Van Breedam <jeroen.vanbreedam@sgr5.be>
Tested-by: NJeroen Van Breedam <jeroen.vanbreedam@sgr5.be>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added device id in struct for codec 92HD81B1C (0x111d76d5).
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a quirk model=acer-aspire for Acer Ferrari 5000 with ALC883 codec.
Note that model=auto doesn't work for this laptop because of broken BIOS
(that doesn't set the subsystem id properly).
Tested-by: NRuss Dill <russ.dill@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace with the standard function calls to use caches for reading
the widget caps and pin caps.

hda_proc.c is still using the direct verbs to get raw values as
much as possible.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In patch_realtek.c, don't create empty or single-item "Input Source"
control elements that are simply superfluous.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The check for the amp-output must be done for widget-caps rather than
pin-caps as implemented in the recent change...  Simply a thinko.

Also, add the similar checks to all places that put output-amp mutes
in the initialization.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added snd_hda_query_pin_caps() to read and cache pin-cap values
to avoid too frequently issuing the same verbs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't set amp-out values to pins without PINCAP_OUT capability,
which are usually assigned for digital mics on ALC663/ALC272.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch does two things:
 Output Intel HDA Function Id in /proc/asound/cardX/codec#X
 Align Vendor/Subsystem/Revision Ids to 8 characters, front-padded with zeros

Before:
 Vendor Id: 0x11d41884
 Subsystem Id: 0x103c281a
 Revision Id: 0x100100

After:
 Function Id: 0x1
 Vendor Id: 0x11d41884
 Subsystem Id: 0x103c281a
 Revision Id: 0x0100100

As report on the Kernel Bugzilla #12888
Signed-off-by: NPascal de Bruijn <pascal@unilogicnetworks.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the detection of digital-mic inputs on ALC663 / ALC272 codecs
in the auto-detection mode.  The automatic mic switch via plugging
isn't implemented yet, though.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The power-widgets have no connection selection, so skip the check
in proc output, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't reset the stream at each prepare callback but do it only once
after the open.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far, the prepare callback is called multiple times, BDL entries
are reset and re-programmed at each time.

This patch adds the check to avoid the reset of BDL entries when the
same parameters are used.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If ratesp or formatsp values are zero, wrong values are passed to ALSA's
the PCM midlevel code. The bug is showed more later than expected.

Also, clean a bit the code.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The position-buffer on ATI controllers are unreliable as well as
on VIA chips, thus the same workaround for DMA position reading as
VIA is useful for ATI.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ATI controllers (at least some SB0600 models) appear buggy to handle
64bit DMA.  As a workaround, reset GCAP bit0 and let the driver to
use only 32bit DMA on these controllers.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous commit breaks the (digital-) beep on ALC662.
ALC662 has the connection index 0x05 while ALC662 and ALC272 have the
index 0x04 for the beep widget.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC662/663 codecs have Beep Amplifier Index 0x04 not 0x05 in 0x0b NID.
Confirmed by testing on real hardware.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HP laptops require GPIO0 on as EAPD.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the power state of each widget before starting the initialization
work so that all verbs are executed properly.

Also, keep power-up during hwdep reconfiguration.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the default pin config for model=vaio (in case of broken BIOS).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a flag to work around the non-standard amp-value handling on
Conexant codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Update the places where the 0x1d widget is used for Conexant 5047, fixing
mismatch introduced after changing the connection.
Signed-off-by: NGregorio Guidi <gregorio.guidi@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>