1. 20 1月, 2010 1 次提交
    • L
      ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C · 5d76b6f6
      Len Brown 提交于
      Linux has always ignored ACPI BIOS C2 with exit latency > 100 usec,
      and the ACPI spec is clear that is correct FADT-supplied C2.
      
      However, the ACPI spec explicitly states that _CST-supplied C-states
      have no latency limits.
      
      So move the 100usec C2 test out of the code shared
      by FADT and _CST code-paths, and into the FADT-specific path.
      
      This bug has not been visible until Nehalem, which advertises
      a CPU-C2 worst case exit latency on servers of 205usec.
      That (incorrect) figure is being used by BIOS writers
      on mobile Nehalem systems for the AC configuration.
      Thus, Linux ignores C2 leaving just C1, which is
      saves less power, and also impacts performance
      by preventing the use of turbo mode.
      
      http://bugzilla.kernel.org/show_bug.cgi?id=15064Tested-by: NAlex Chiang <achiang@hp.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      5d76b6f6
  2. 19 1月, 2010 11 次提交
  3. 18 1月, 2010 14 次提交
  4. 17 1月, 2010 14 次提交
    • M
      V4L/DVB (13851): Fix Input dependency for Mantis · fcd89de3
      Manu Abraham 提交于
      >
      >
      >
      > CONFIG_INPUT=n
      
      As reported by Randy Dunlap <randy.dunlap@oracle.com>:
      > ERROR: "ir_input_register" [drivers/media/dvb/mantis/mantis_core.ko] undefined!
      > ERROR: "ir_input_unregister" [drivers/media/dvb/mantis/mantis_core.ko] undefined!
      > ERROR: "ir_input_init" [drivers/media/dvb/mantis/mantis_core.ko] undefined!
      > ERROR: "input_free_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined!
      > ERROR: "input_allocate_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined!
      Signed-off-by: NManu Abraham <manu@linuxtv.org>
      Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      fcd89de3
    • M
      V4L/DVB(13824a): mantis: Fix __devexit bad annotations · 4cf0b3f1
      Mauro Carvalho Chehab 提交于
      WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x13d7): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit()
      The function __devinit mantis_pci_probe() references
      a function __devexit mantis_i2c_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_i2c_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x1433): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit()
      The function __devinit mantis_pci_probe() references
      a function __devexit mantis_pci_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_pci_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x185e): Section mismatch in reference from the function hopper_pci_probe() to the function
      .devexit.text:mantis_i2c_exit()
      The function __devinit hopper_pci_probe() references
      a function __devexit mantis_i2c_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_i2c_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x18ba): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit()
      The function __devinit hopper_pci_probe() references
      a function __devexit mantis_pci_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_pci_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x68b8): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit()
      The function __devinit mantis_pci_probe() references
      a function __devexit mantis_i2c_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_i2c_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6914): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit()
      The function __devinit mantis_pci_probe() references
      a function __devexit mantis_pci_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_pci_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d3f): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit()
      The function __devinit hopper_pci_probe() references
      a function __devexit mantis_i2c_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_i2c_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d9b): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit()
      The function __devinit hopper_pci_probe() references
      a function __devexit mantis_pci_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_pci_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/built-in.o(.devinit.text+0x14634): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit()
      The function __devinit mantis_pci_probe() references
      a function __devexit mantis_i2c_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_i2c_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/built-in.o(.devinit.text+0x14690): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit()
      The function __devinit mantis_pci_probe() references
      a function __devexit mantis_pci_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_pci_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/built-in.o(.devinit.text+0x14abb): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit()
      The function __devinit hopper_pci_probe() references
      a function __devexit mantis_i2c_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_i2c_exit() so it may be used outside an exit section.
      
      WARNING: drivers/media/built-in.o(.devinit.text+0x14b17): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit()
      The function __devinit hopper_pci_probe() references
      a function __devexit mantis_pci_exit().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      mantis_pci_exit() so it may be used outside an exit section.
      Acked-by: NManu Abraham <manu@linuxtv.org>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      4cf0b3f1
    • M
      V4L/DVB (13808b): mantis: replace DMA_nnBIT_MASK to DMA_BIT_MASK(32) · 184ac753
      Mauro Carvalho Chehab 提交于
      drivers/media/dvb/mantis/mantis_pci.c: In function ‘mantis_pci_init’:
      drivers/media/dvb/mantis/mantis_pci.c:76: warning: ‘DMA_nnBIT_MASK’ is deprecated
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      184ac753
    • M
    • M
      V4L/DVB(13808a): mantis: convert it to the new ir-core register/unregister functions · 9c0832e3
      Mauro Carvalho Chehab 提交于
      Fix a merge conflict between mantis and IR cleanups
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      9c0832e3
    • M
    • M
      4cd191fb
    • M
      28fddb7c
    • M
      V4L/DVB (13809): Fix Checkpatch violations · f5ae4f6f
      Manu Abraham 提交于
      Signed-off-by: NManu Abraham <manu@linuxtv.org>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      f5ae4f6f
    • M
    • M
      a1497357
    • M
    • M
      V4L/DVB (13804): Remove unused I2C Adapter ID · 0ac6e141
      Manu Abraham 提交于
      Signed-off-by: <manu@linuxtv.org>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      0ac6e141
    • M
      V4L/DVB (13803): Remove unused dependency on CU1216 · 83dbe82b
      Manu Abraham 提交于
      Thanks to Matthias Wachter <mathias@waechter.wiz.at>
      for pointing it out.
      Signed-off-by: NManu Abraham <manu@linuxtv.org>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      83dbe82b