- 15 10月, 2010 10 次提交
-
-
由 Emil Tantilov 提交于
Following patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emil Tantilov 提交于
Remove functions that are declared, but not used in the driver. This patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add new interrupt ack functions and other hardware interface logic to support the new device. Update version to 2.2.6. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
During cnic shutdown, the original driver code requires userspace to close the uio device within a few seconds. This doesn't always happen as the userapp may be hung or otherwise take a long time to close. The system may crash when this happens. We fix the problem by decoupling the uio structures from the cnic structures during cnic shutdown. We do not unregister the uio device until the cnic driver is unloaded. This eliminates the unreliable wait loop for uio to close. All uio structures are kept in a linked list. If the device is shutdown and later brought back up again, the uio strcture will be found in the linked list and coupled back to the cnic structures. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
and put all uio related structures and ring buffers in it. This allows uio operations to be done independent of the cnic device structures. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
to free all UIO related structures. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The bnx2x devices require a 2 second quiet time before sending the last RAMROD command to destroy a connection. This sleep wait adds up to a long delay when iscsid is serially destroying maultiple connections. Create a workqueue to perform the final connection cleanup in the background to speed up the process. This significantly speeds up the process as the wait time can be done in parallel for multiple connections. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Refactoring code for the next patch to defer connection clean up. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
so that we can additional bit definitions without requiring a spinlock. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
to reduce some duplicate code. Also, use tasklet_kill() in cnic_free_irq() to wait for the cnic_irq_task to complete. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2010 1 次提交
-
-
由 Dmitry Kravkov 提交于
Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Tested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 10月, 2010 4 次提交
-
-
由 Michael Chan 提交于
To prevent unnecessary error message. pci_save_state() is also moved to the end of ->probe() so that all PCI config, including AER state, will be saved. Update version to 2.0.18. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
- Improved flow control and simplified interface - Use hardware RSS indirection table instead of the slower firmware- based table - Lower latency interrupt on 5709 Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Slaby 提交于
Stanse found that pch_gbe_xmit_frame uses skb after it is freed. Fix that. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Masayuki Ohtake <masa-korg@dsn.okisemi.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Slaby 提交于
Stanse found that i2400m_rx frees skb, but still uses skb->len even though it has skb_len defined. So use skb_len properly in the code. And also define it unsinged int rather than size_t to solve compilation warnings. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: linux-wimax@intel.com Acked-by: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2010 2 次提交
-
-
由 Oskar Schirmer 提交于
with hardware slow in negotiation, the system did freeze while trying to mount root on nfs at boot time. the link state has not been initialised so network stack tried to start transmission right away. this caused instant retries, as the driver solely stated business upon link down, rendering the system unusable. notify carrier off initially to prevent transmission until phylib will report link up. Signed-off-by: NOskar Schirmer <oskar@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roel Kluin 提交于
Test whether index exceeds fw->size before reading the element Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
-
- 10 10月, 2010 5 次提交
-
-
由 Eric Dumazet 提交于
sundance get_stats() should not be run concurrently, add a lock to avoid potential losses. Note: Remove unused rx_lock field Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Kaiser 提交于
Simplify: ((a && !b) || (!a && b)) => (a != b) Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Kaiser 提交于
Simplify: ((a && b) || (!a && !b)) => (a == b) Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Acked-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Use DMA API as PCI equivalents will be deprecated. This change also allow to allocate with GFP_KERNEL where possible. Tested-by: NNeal Becker <ndbecker2@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
We have fedora bug report where driver fail to initialize after suspend/resume because of memory allocation errors: https://bugzilla.redhat.com/show_bug.cgi?id=629158 To fix use GFP_KERNEL allocation where possible. Tested-by: NNeal Becker <ndbecker2@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2010 8 次提交
-
-
由 Amit Kumar Salecha 提交于
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
This patch just rename all P3 #define to P3P. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Allow promiscous mode setting for VF's depending upon the configuration. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Remove "Flex-10" from board description. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
LRO was not getting enable after interface down/up. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Put device in quiescent mode during internal loopback test. Before running test, set state to NEED_QUISCENT. After getting ack from all function, change state to QUISCENT and perform test. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Currently fw recovery usage global workqueue. As same workqueue used by kernel for ethtool and etc., supporting quiescent mode is not possible, without driver private workqueue. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
The filter engine will time-out and ignore filters beyond 200-something hops. We also need to avoid infinite loops in efx_filter_search() when the table is full. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 10月, 2010 2 次提交
-
-
由 Rajkumar Manoharan 提交于
The following commit removed DISABLE_REGWRITE_BUFFER ops. The unnecessary REGWRITE_BUFFER_FLUSH was not removed properly which is causing failure on hw reset. Author: Felix Fietkau <nbd@openwrt.org> Date: Tue Oct 5 12:03:42 2010 +0200 ath9k_hw: clean up register write buffering Signed-off-by: NRajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
In the NVS/INI-parameters for the driver/firmware there is the FEM (front end module) selection option, which may configure the hardware FEM via autodetection or manual selection. So far, there has been support for manual selection only. Add support for FEM autodetection. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 10月, 2010 8 次提交
-
-
由 John W. Linville 提交于
This reverts commit 030725d2. This commit relies on commit 5ed3bc72 ("mac80211: use netif_receive_skb in ieee80211_tx_status callpath") Unfortunately not all drivers are calling ieee80211_tx_status from a compatible context, so that commit needs to be reverted in 2.6.36. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Peter Waskiewicz 提交于
Use the new infrastructure to balance interrupts for flow alignment when ATR or Flow Director are enabled. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Schwidefsky 提交于
The stmmac driver does not compile on s390: drivers/net/stmmac/stmmac_main.c: In function 'stmmac_adjust_link': drivers/net/stmmac/stmmac_main.c:210: error: implicit declaration of function 'readl' drivers/net/stmmac/stmmac_main.c:263: error: implicit declaration of function 'writel' drivers/net/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe': drivers/net/stmmac/stmmac_main.c:1674: error: implicit declaration of function 'ioremap' drivers/net/stmmac/stmmac_main.c:1674: warning: assignment makes pointer from integer without a cast drivers/net/stmmac/stmmac_main.c:1761: error: implicit declaration of function 'iounmap' make[3]: *** [drivers/net/stmmac/stmmac_main.o] Error 1 Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Giuseppe CAVALLARO <peppe.cavallaro@st.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Drop legacy includes since 2.4.x Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krzysztof Oledzki 提交于
Effect: Slave Interface: eth5 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: XX:XX:XX:XX:XX:XX Slave queue ID: 0 Signed-off-by: NKrzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wey-Yi Guy 提交于
Adding MODULE_FIRMWARE define for 130 series of devices Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
130 series device should use firmware name with 130 in it. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Krzysztof Piotr Oledzki 提交于
When an interface was enslaved when it was down, bonding thinks it has speed -1 even after it goes up. This leads into selecting a wrong active interface in active/backup mode on mixed 10G/1G or 1G/100M environment. before: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. after: bonding: bond0: link status definitely up for interface eth5, 10000 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex. Signed-off-by: NKrzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-