These handlers are supposed to be called externally from the codec
drivers once when they need to handle own jack events.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When no controls are assigned in the parser (e.g. no analog path),
spec->kctls.list is still NULL.  We need to check it before passing to
snd_hda_add_new_ctls().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In some cases, we want to manipulate the auto_pin_cfg table before
passing to snd_hda_gen_parse_auto_config() (e.g. Realtek SSID check
code fiddles with the headphone pin).   Also passing ignore_pins just
for snd_hda_parse_pin_defcfg() isn't good.

In this patch, snd_hda_gen_parse_auto_config() is changed to receive
the auto_pin_cfg table to be parsed.  The passed auto_pin_cfg table
must have been initialized (typically by calling
snd_hda_gen_parse_auto_config()) beforehand by the caller.

Also together with this change, spec->parse_flags is also removed.
Since this was referred only at the place calling
snd_hda_parse_pin_defcfg(), no longer needed to be kept in spec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It may be used in other codec drivers, so let it free.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Enable EAPD in output path initializations automatically unless the
new flag spec->own_eapd_ctl is set.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Finally the whole generic parser code in Realtek driver is moved into
hda_generic.c so that it can be used for generic codec driver.
The old dumb generic driver is replaced.  Yay.

The future plan is to adapt this generic parser for other codecs,
i.e. the codec driver calls the exported functions in generic driver
but adds some codec-specific fixes and setups.

As of this commit, the complete driver code is still duplicated in
Realtek codec driver.  The big code reduction will come from now on.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CONFIG_SND_HDA_POWER_SAVE is no longer an experimental feature and its
behavior can be well controlled via the default value and module
parameter.  Let's just replace it with the standard CONFIG_PM.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These aren't modules, but they do make use of these macros, so
they will need export.h to get that definition.  Previously,
they got it via the implicit module.h inclusion.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch improves the input-source label strings to be generated from
the pin information instead of fixed strings per AUTO_PIN_* type.
This gives more suitable labels, especially for mic and line-in pins.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Keep char array in the input_mux item itself instead of pointing to
an external string.  This is a preliminary work for improving the
input-mux name based on the pin role.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This set of changes add missing NID values to some static control
elemenents. Also, it handles all "Capture Source" or "Input Source"
controls.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This is an initial patch to show universal control<->NID assigment in
proc codec file. The change helps to debug codec related problems.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a helper macro to retrieve the widget type from wiget cap bits.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Previous patch used widget type, but the presence flag of the connection
list is in the widget capabilities.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reading node connections for an unknown widget can confuse HDA codec bus.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added snd_hda_query_pin_caps() to read and cache pin-cap values
to avoid too frequently issuing the same verbs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace with snd_hda_codec_get_pincfg() in the places where available.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split the monolithc HD-audio driver into several pieces:
 - snd-hda-intel   HD-audio PCI controller driver; loaded via udev
 - snd-hda-codec   HD-audio codec bus driver
 - snd-hda-codec-* Specific HD-audio codec drivers

When built as modules, snd-hda-codec (that is invoked by snd-hda-intel)
looks up the codec vendor ID and loads the corresponding codec module
automatically via request_module().

When built in a kernel, each codec drivers are statically hooked up
before probing the PCI.

This patch adds appropriate EXPORT_SYMBOL_GPL()'s and the module
information for each driver, and driver-linking codes between
codec-bus and codec drivers.

TODO:
  - Avoid EXPORT_SYMBOL*() when built-in kernel
  - Restore __devinit appropriately depending on the condition
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Manage all kcontrol elements created in the hda-intel driver.
This makes it possible to remove and reconfigure the controls
of each codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Keep the format verb at closing PCM streams.
Introduced snd_hda_codec_cleanup_stream() for the parcicular purpose.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Intel HD Audio: Use list_for_each_entry(_safe) instead of
list_for_each(_safe)
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added CONFIG_SND_HDA_POWER_SAVE kconfig.  It's an experimental option
to achieve an aggressive power-saving.  With this option, the driver
will turn on/off the power of each codec and controller chip dynamically
on demand.
The patch introduces a new module option 'power_save'.  It specifies
the second of time-out for automatic power-down.  As default, it's
10 seconds.  Setting 0 means to suppress the power-saving feature.
The codec may have analog-input loopbacks, which are usually represented
by mixer elements such as 'Mic Playback Switch' or 'CD Playback Switch'.
When these are on, we cannot turn off the mixer and the codec chip has
to be kept on.  For bookkeeping these states, a new codec-callback is
introduced.
For the bus-controller side, a new callback pm_notify is introduced,
which can be used to turn on/off the contoller appropriately.
Note that this power-saving might cause slight click-noise at
power-on/off.  Also, it might take some time to wake up the codec, and
might even drop some tones at the very beginning.  This seems to be the
side-effect of turning off the controller chip.
This turn-off of the controller can be disabled by undefining
HDA_POWER_SAVE_RESET_CONTOLLER in hda_intel.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added snd_hda_codec_amp_stereo() function that changes both of stereo
channels with the same mask and value bits.  It simplifies most of
amp-handling codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

So far, the driver looked the table of snd_kcontrol_new used for creating
mixer elements and forces to call each of its put callbacks in PM resume
code.  This is too ugly and hackish.
Now, the resume is simplified using the codec amp and command register
caches.  The driver simply restores the values that have been written
in the cache table.  With this simplification, most codec support codes
don't require any special resume callback.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix the retrival of widget connection list in the generic parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.

In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.

My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:

arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c

I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.

Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
  [PATCH] scatterlist.h needs types.h
  http://lkml.org/lkml/2007/3/01/141Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix NULL dereference in hda_generic.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch addes the support of the independent 'Headphone' volume
control to the generic codec parser.  Some codecs (e.g. Conexant)
have separate connections to the headphone and the independent amp
adjustment is needed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fixed the mic capture with generic parser of hda-codec driver
- Use VREF80 for mic pins if available
- Handle multiple inputs correctly on audio-input widget node.
Confirmed on a conexant codec chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: HDA generic driver

Fixed the generic auto-configurator to check speaker pins in
addition.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA generic driver

Allocate connection lists dynamically in generic parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver,HDA generic driver

Remove xxx_t typedefs from the HD-Audio codec support codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA generic driver
This creates 'empty' hda generic for unknown MFG-only codecs.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver
BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver
Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver
VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver
Replace kcalloc(1,..) with kzalloc().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver,HDA generic driver
Summar: hda-codec - MFG support

This adds Modem Functional Group (MFG) support and option for 9600
sample rate.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver
- Fix some invalid configurations, typos in the last patch
- Make init_verbs chainable, so that different configs can share the same
  init_verbs
- Reorder and clean up the source codes in patch_realtek.c
- Add the pin default configuration parser, used commonly in cmedia
  and realtek patch codes.
- Add 'auto' model to ALC880 for auto-configuration from BIOS
  Use this model as default, and 3-stack as fallback
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA generic driver
Fix a typo in comments.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>