If GIC is present, then use it to send IPIs between the cores.
Using GIC for IPIs is simpler and is usable for multicore
systems compared to the existing way of doing IPIs where all VPEs
had to be disabled for another VPE to access the Cause register
in one of the TCs and enable all the VPEs back.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6040/

According to Documentation/cpu-hotplug.txt, the cpu_present_mask should
contain all the CPUs which are present in the system. Therefore, all the TCs
currently present in the system should be marked as 'present' even if they
will never be brought online.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6039/

According to MIPS32 and MIPS64 PRA documents,
a value of 7 in IL and DL fields is marked as "Reserved"
so panic if the core uses this value in the config1 register.
Also simplify the code a little bit.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5861/

The mips_mt_* symbols are only built and exported if
CONFIG_MIPS_MT is enabled.

Fixes the following build problem when CONFIG_SMP is enabled
but CONFIG_MIPS_MT is not.

arch/mips/built-in.o: In function `cmp_prepare_cpus':
arch/mips/kernel/smp-cmp.c:197:
undefined reference to `mips_mt_set_cpuoptions'
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5860/

Fix nvram_read_alpha2 copying too many bytes over the ssb_sprom
structure. Also fix the arguments of the read_macaddr, although the code
was technically not wrong before due to an extra dereference.
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6211/

This adds support for vectored interrupt which is supported by the SoC
using a MIPS 74K CPU like the BCM4716 and BCM4706.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6290/

The BCM47XX SoC code missed a cpu-feature-overrides.h header file, this
patch adds it. This code supports a long line of SoCs with different
features so for some features we still have to rely on the runtime
detection.

This was crated by checking the features of a BCM4712, BCM4704,
BCM5354, BCM4716 and BCM4706 SoC and then tested on these SoCs. There
are some SoCs missing but I hope they do not have any more or less
features.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6289/

Move the possible nvram sizes from the stack into the data segment
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6044/

plat_irq_dispatch() is called from asm code, add asmlinkage.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6043/

The defconfig for bcm47xx contained lots of driver which are not
special for these SoCs and missed on the other side some some drivers
for parts essential for these SoC and only found on here. The flash,
usb and some Ethernet driver were missing.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5930/

The BCM47xx SoCs have a 8250 serial compatible console at address
0x18000300 and an other at 0x18000400. On most devices 0x18000300 is
wired to some pins on the board, we should use that.
This is the smae for the AI (bcma) and the SB (ssb) bus, this is some
offset on the chip common core.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5889/

bcm47xx only uses the CFE code for early print to a console, but that
is also possible with a early print serial 8250 driver.

The CFE api init causes hangs somewhere in prom_init_cfe() on some
devices like the Buffalo WHR-HP-G54 and the Asus WL-520GU.
This was reported in https://dev.openwrt.org/ticket/4061 and
https://forum.openwrt.org/viewtopic.php?id=17063

This will remove all the CFE handling code from bcm47xx.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5888/

Recently the output of "system type" in  /proc/cpuinfo was changed to
Broadcom BCM4730 (Some sample board), but it is better to just print
the SoC name in the "system type" entry. The board name will be added
in the machine entry later.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5865/

All MIPS cores on BCM63XX identify as Broadcom, not MIPS, so no need
to support non-broadcom MIPS CPUs. This also ensures that CPU_BMIPS
is always selected.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6246/

BMIPS32 and  BMIPS3300 also need to be available for MIPS32R1, as
bcm47xx might not select BMIPS.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6245/

Let BCM47XX_SSB select the appropriate BMIPS CPUs enountered on those
systems.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6244/

Let each supported chip select the appropirate SYS_HAS_CPU_BMIPS*
option for its embedded processor, so support will be conditionally
included.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6250/

Use the return value for guarding further SMP setup.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6249/

Add a helper similar to the generic register_XXX_smp_ops() for bmips.
Register SMP UP ops in case of BMIPS32/3300.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6248/

Codewise there is no difference between these two, so it does not make
sense to treat them differently. Also chip families having one of these
tend to have the other.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6247/

As they are MIPS32 CPUs they do support the prefetch opcode.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6243/

All BMIPS CPUs support HIGHMEM, so it should be selected by CPU_BMIPS.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6242/

Instead of treating each flavour as an exclusive CPU to select, make
BMIPS the only option and let SYS_HAS_CPU_BMIPS* decide for which
flavours to include support.

Run tested on BMIPS3300 and BMIPS4350, only build tested for BMIPS4380
and BMIPS5000.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6240/

Allow building for all bmips cpus at the same time by changing ifdefs
to checks for the cpu type, or adding appropriate checks to the
assembly.

Since BMIPS43XX and BMIPS5000 require different IPI implementations,
split the SMP ops into one for each, so the runtime overhead is only
at registration time for them.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6241/

Add guards around the enum to allow including cpu.h from assembly.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6238/

BCM3368 has the same shared TLB as BCM6358.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6239/

Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6180/

Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6179/

Properly set up the HSSPI clock rate depending on the SoC's PLL rate.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6177/

Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6178/

CPUs implementing MIPS32 R2 may include a 64-bit FPU, just as MIPS64 CPUs
do. In order to preserve backwards compatibility a 64-bit FPU will act
like a 32-bit FPU (by accessing doubles from the least significant 32
bits of an even-odd pair of FP registers) when the Status.FR bit is
zero, again just like a mips64 CPU. The standard O32 ABI is defined
expecting a 32-bit FPU, however recent toolchains support use of a
64-bit FPU from an O32 MIPS32 executable. When an ELF executable is
built to use a 64-bit FPU a new flag (EF_MIPS_FP64) is set in the ELF
header.

With this patch the kernel will check the EF_MIPS_FP64 flag when
executing an O32 binary, and set Status.FR accordingly. The addition
of O32 64-bit FP support lessens the opportunity for optimisation in
the FPU emulator, so a CONFIG_MIPS_O32_FP64_SUPPORT Kconfig option is
introduced to allow this support to be disabled for those that don't
require it.

Inspired by an earlier patch by Leonid Yegoshin, but implemented more
cleanly & correctly.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/6154/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These macros are not used anywhere in the kernel. Remove them.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6111/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds support for microMIPS encodings of the mfhc1 & mthc1
instructions introduced in release 2 of the mips32 & mips64
architectures, converting them to their mips32 equivalents for the FPU
emulator.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6110/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds support for the mfhc1 & mthc1 instructions to the FPU
emulator. These instructions were introduced in release 2 of the MIPS32
& MIPS64 architectures and allow access to the most significant 32 bits
of a 64-bit FP register.

[ralf@linux-mips.org: Fix ifdef hell added by original patch.]
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6112/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No point in having this bit defined by architecture.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130917183629.090698799@linutronix.de

glibc recently changed the error string for ESTALE to remove "NFS" -

https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=96945714ec61951cc748da2b4b8a80cf02127ee9

from: [ERR_REMAP (ESTALE)] = N_("Stale NFS file handle"),
to:   [ERR_REMAP (ESTALE)] = N_("Stale file handle"),

And some have expressed concern that the kernel's errno.h
comments still refer to NFS.

So make that change... note that this is a comment-only change,
and has no functional difference.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The early_init_devtree() API was removed in linux-next for 3.13 with
commit "mips: use early_init_dt_scan". This causes Netlogic XLP compile
to fail:

arch/mips/netlogic/xlp/setup.c:101: undefined reference to `early_init_devtree'

Add xlp_early_init_devtree() which uses the __dt_setup_arch() to
handle early device tree related initialization to fix this.
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>