Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 18 7月, 2012 2 次提交
  3. 11 7月, 2012 1 次提交
  5. 10 7月, 2012 2 次提交
    • L
      iio: Introduce iio_validate_scan_mask_onehot · 81636632
      由 Lars-Peter Clausen 提交于 
      Add a helper function for validating a scan mask for devices where exactly one
channel must be selected during sampling. This is a common case among devices
which have scan mask restrictions so it makes sense to provide this function in
the core.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
      81636632
    • L
      iio: Add callback to check whether a scan mask is valid · 939546d1
      由 Lars-Peter Clausen 提交于 
      This is useful for cases where the number of valid scan masks grows
exponentially, but it is rather easy to check whether a mask is valid or not
programmatically.

An example of such a case is a device with multiple ADCs where each ADC has a
upstream MUX, which allows to select from a number of physical channels.

  +-------+   +-------+
  |       |   |       | --- Channel 1
  | ADC 1 |---| MUX 1 | ---   ...
  |       |   |       | --- Channel M
  +-------+   +-------+

     .            .            .
     .            .            .
     .            .            .

  +-------+   +-------+
  |       |   |       | --- Channel M * N + 1
  | ADC N |---| MUX N | ---       ...
  |       |   |       | --- Channel M * N + M
  +-------+   +-------+

The number of necessary scan masks for this case is (M+1)**N - 1, on the other
hand it is easy to check whether subsets for each ADC of the scanmask have only
one bit set.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
      939546d1
  7. 07 7月, 2012 1 次提交
  9. 30 6月, 2012 4 次提交
  11. 22 6月, 2012 1 次提交
  13. 21 6月, 2012 5 次提交
  15. 19 6月, 2012 6 次提交
  17. 18 6月, 2012 2 次提交
    • S
      ftrace: Make all inline tags also include notrace · 93b3cca1
      由 Steven Rostedt 提交于 
      Commit 5963e317 ("ftrace/x86: Do not change stacks in DEBUG when
calling lockdep") prevented lockdep calls from the int3 breakpoint handler
from reseting the stack if a function that was called was in the process
of being converted for tracing and had a breakpoint on it. The idea is,
before calling the lockdep code, do a load_idt() to the special IDT that
kept the breakpoint stack from reseting. This worked well as a quick fix
for this kernel release, until a certain config caused a lockup in the
function tracer start up tests.

Investigating it, I found that the load_idt that was used to prevent
the int3 from changing stacks was itself being traced!

Even though the config had CONFIG_OPTIMIZE_INLINING disabled, and
all 'inline' tags were set to always inline, there were still cases that
it did not inline! This was caused by CONFIG_PARAVIRT_GUEST, where it
would add a pointer to the native_load_idt() which made that function
to be traced.

Commit 45959ee7 ("ftrace: Do not function trace inlined functions")
only touched the 'inline' tags when CONFIG_OPMITIZE_INLINING was enabled.
PARAVIRT_GUEST shows that this was not enough and we need to also
mark always_inline with notrace as well.
Reported-by: NFengguang Wu <wfg@linux.intel.com>
Tested-by: NFengguang Wu <wfg@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      93b3cca1
    • T
      NFSv4.1: Fix umount when filelayout DS is also the MDS · 2a4c8994
      由 Trond Myklebust 提交于 
      Currently there is a 'chicken and egg' issue when the DS is also the mounted
MDS. The nfs_match_client() reference from nfs4_set_ds_client bumps the
cl_count, the nfs_client is not freed at umount, and nfs4_deviceid_purge_client
is not called to dereference the MDS usage of a deviceid which holds a
reference to the DS nfs_client.  The result is the umount program returns,
but the nfs_client is not freed, and the cl_session hearbeat continues.

The MDS (and all other nfs mounts) lose their last nfs_client reference in
nfs_free_server when the last nfs_server (fsid) is umounted.
The file layout DS lose their last nfs_client reference in destroy_ds
when the last deviceid referencing the data server is put and destroy_ds is
called. This is triggered by a call to nfs4_deviceid_purge_client which
removes references to a pNFS deviceid used by an MDS mount.

The fix is to track how many pnfs enabled filesystems are mounted from
this server, and then to purge the device id cache once that count reaches
zero.
Reported-by: NJorge Mora <Jorge.Mora@netapp.com>
Reported-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      2a4c8994
  19. 16 6月, 2012 5 次提交
  21. 14 6月, 2012 6 次提交
  23. 13 6月, 2012 5 次提交