AMD's reference BIOS code had a bug that could result in the
firmware failing to reenable the iommu on resume. It
transpires that this causes certain less than desirable
behaviour when it comes to PCI accesses, to whit them ending
up somewhere near Bristol when the more desirable outcome
was Edinburgh. Sadness ensues, perhaps along with filesystem
corruption.  Let's make sure that it gets turned back on,
and that we restore its configuration so decisions it makes
bear some resemblance to those made by reasonable people
rather than crack-addled lemurs who spent all your DMA on
Thunderbird.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

When caching is disabled on the MN10300 arch, the sys_cacheflush()
function is removed by conditional stuff in the makefiles, but is still
referred to by the syscall table.

Provide a null version that just returns 0 when caching is disabled (or
-EINVAL if the arguments are silly).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tssk.  Apparently Al hadn't checked commit c52c2ddc ("alpha: switch
osf_sigprocmask() to use of sigprocmask()") at all. It doesn't compile.

Fixed as per suggestions from Michael Cree.
Reported-by: NMichael Cree <mcree@orcon.net.nz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: fix module refcount breakage introduced by libahci split

libata depends on scsi_host_template for module reference counting and
sht's should be owned by each low level driver.  During libahci split,
the sht was left with libahci.ko leaving the actual low level drivers
not reference counted.  This made ahci and ahci_platform always
unloadable even while they're being actively used.

Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for
each low level ahci driver.

stable: only applicable to 2.6.35.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NPedro Francisco <pedrogfrancisco@gmail.com>
Tested-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: stable@kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon (coretemp): Fix build breakage if SMP is undefined

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: fix pci_resource_alignment prototype

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  tcp: Fix >4GB writes on 64-bit.
  net/9p: Mount only matching virtio channels
  de2104x: fix ethtool
  tproxy: check for transparent flag in ip_route_newports
  ipv6: add IPv6 to neighbour table overflow warning
  tcp: fix TSO FACK loss marking in tcp_mark_head_lost
  3c59x: fix regression from patch "Add ethtool WOL support"
  ipv6: add a missing unregister_pernet_subsys call
  s390: use free_netdev(netdev) instead of kfree()
  sgiseeq: use free_netdev(netdev) instead of kfree()
  rionet: use free_netdev(netdev) instead of kfree()
  ibm_newemac: use free_netdev(netdev) instead of kfree()
  smsc911x: Add MODULE_ALIAS()
  net: reset skb queue mapping when rx'ing over tunnel
  br2684: fix scheduling while atomic
  de2104x: fix TP link detection
  de2104x: fix power management
  de2104x: disable autonegotiation on broken hardware
  net: fix a lockdep splat
  e1000e: 82579 do not gate auto config of PHY by hardware during nominal use
  ...

Commit e40cc4bd introduced
a build breakage if CONFIG_SMP is undefined. This commit
fixes the problem.

This fix is only a workaround. For a real fix, cpu_sibling_mask() should
be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be
included directly. This fix is currently not possible because asm/smp.h defines
cpu_sibling_mask() unconditionally and is included directly from many source
files.
Reported-by: NIngo Molnar <mingo@elte.hu>
Tested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Avoid 'constant_test_bit()' misoptimization due to cast to non-volatile

Fixes kernel bugzilla #16603

tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write
zero bytes, for example.

There is also the problem higher up of how verify_iovec() works.  It
wants to prevent the total length from looking like an error return
value.

However it does this using 'int', but syscalls return 'long' (and
thus signed 64-bit on 64-bit machines).  So it could trigger
false-positives on 64-bit as written.  So fix it to use 'long'.
Reported-by: NOlaf Bonorden <bono@onlinehome.de>
Reported-by: NDaniel Büse <dbuese@gmx.de>
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a
pktcdvd_device from the global pkt_devs array.  The index into this
array is provided directly by the user and is a signed integer, so the
comparison to ensure that it falls within the bounds of this array will
fail when provided with a negative index.

This can be used to read arbitrary kernel memory or cause a crash due to
an invalid pointer dereference.  This can be exploited by users with
permission to open /dev/pktcdvd/control (on many distributions, this is
readable by group "cdrom").
Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com>
[ Rather than add a cast, just make the function take the right type -Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The configuration choice for the port on which the GDB stub listens has
a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to
match the option.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

p9_virtio_create will only compare the the channel's tag characters
against the device name till the end of the channel's tag but not till
the end of the device name. This means that if a user defines channels
with the tags foo and foobar then he would mount foo when he requested
foonot and may mount foo when he requested foobar.

Thus it is necessary to check both string lengths against each other in
case of a successful partial string match.
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the interface is up, using ethtool breaks it because:
a) link is put down but media_timer interval is not shortened to NO_LINK
b) rxtx is stopped but not restarted

Also manual 10baseT-HD (and probably FD too - untested) mode does not work -
the link is forced up, packets are transmitted but nothing is received.
Changing CSR14 value to match documentation (not disabling link check) fixes this.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

as done in ip_route_connect()
Signed-off-by: NUlrich Weber <uweber@astaro.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv4 and IPv6 have separate neighbour tables, so
the warning messages should be distinguishable.

[ Add a suitable message prefix on the ipv4 side as well -DaveM ]
Signed-off-by: NUlrich Weber <uweber@astaro.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When TCP uses FACK algorithm to mark lost packets in
tcp_mark_head_lost(), if the number of packets in the (TSO) skb is
greater than the number of packets that should be marked lost, TCP
incorrectly exits the loop and marks no packets lost in the skb. This
underestimates tp->lost_out and affects the recovery/retransmission.
This patch fargments the skb and marks the correct amount of packets
lost.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/cxgb3: Turn off RX coalescing for iWARP connections

* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
  ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
  ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE
  ARM: 6408/1: omap: Map only available sram memory
  ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
  ARM: pxa: remove pr_<level> uses of KERN_<level>
  ARM: pxa168fb: clear enable bit when not active
  ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured
  ARM: pxa168: fix corrected reset vector
  ARM: pxa: Use PIO for PI2C communication on Palm27x
  ARM: pxa: Fix Vpac270 gpio_power for MMC
  ARM: 6401/1: plug a race in the alignment trap handler
  ARM: 6406/1: at91sam9g45: fix i2c bus speed
  leds: leds-ns2: fix locking
  ARM: dove: fix __io() definition to use bus based offset
  dmaengine: fix interrupt clearing for mv_xor
  ARM: kirkwood: Unbreak PCIe I/O port
  ARM: Fix build error when using KCONFIG_CONFIG
  ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing
  ARM: 6400/1: at91: fix arch_gettimeoffset fallout
  ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  net/9p: fix memory handling/allocation in rdma_request()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Fix driver module removal

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  TOMOYO: Don't abuse sys_getpid(), sys_getppid()

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915/sdvo: Handle unsupported GET_SUPPORTED_ENHANCEMENTS gracefully
  drm/i915/sdvo: Cleanup connector on error path
  drm/i915: Fix 945GM regression in e259befd

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove
  mmc: sdhci-s3c: fix incorrect spinlock usage after merge
  mmc: MAINTAINERS: add myself as MMC maintainer

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: pd6729: Fix error path
  pcmcia: preserve configuration information if request_io fails partly

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/a
  intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/amd-iommu: Fix rounding-bug in __unmap_single
  x86/amd-iommu: Work around S3 BIOS bug
  x86/amd-iommu: Set iommu configuration flags in enable-loop
  x86, setup: Fix earlyprintk=serial,0x3f8,115200
  x86, setup: Fix earlyprintk=serial,ttyS0,115200

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Catch spurious interrupts after disabling counters
  tracing/x86: Don't use mcount in kvmclock.c
  tracing/x86: Don't use mcount in pvclock.c

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It really has no business being there; short of a serious kernel bug
we should already have USER_DS at that point.  It shouldn't have been
done on x86 either...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

set ->orig_d0 to -1, same as what sigreturn does
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

force_sigsegv() is there for purpose...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get rid of a useless wrapper, while we are at it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch (commit 690a1f20) added a
new call site for acpi_set_WOL() without checking that the function is
actually suitable to be called via

 vortex_set_wol+0xcd/0xe0 [3c59x]
 dev_ethtool+0xa5a/0xb70
 dev_ioctl+0x2e0/0x4b0
 T.961+0x49/0x50
 sock_ioctl+0x47/0x290
 do_vfs_ioctl+0x7f/0x340
 sys_ioctl+0x80/0xa0
 system_call_fastpath+0x16/0x1b

i.e. outside of code paths run when the device is not yet enabled or
already disabled. In particular, putting the device into D3hot is a
pretty bad idea when it was already brought up.

Furthermore, all prior callers of the function made sure they're
actually dealing with a PCI device, while the newly added one didn't.

In the same spirit, the .get_wol handler shouldn't indicate support
for WOL for non-PCI devices.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The HW by default has RX coalescing on.  For iWARP connections, this
causes a 100ms delay in connection establishement due to the ingress
MPA Start message being stalled in HW.  So explicitly turn RX
coalescing off when setting up iWARP connections.

This was causing very bad performance for NP64 gather operations using
Open MPI, due to the way it sets up connections on larger jobs.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>