NULL function pointers are very bad security wise. This one got caught by
kerneloops.org quite a few times, so it's happening in the field....

Fix is simple, check the function pointer for NULL, like 6 other places
in the same function are already doing.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The dummy version of 'nf_conntrack_event_cache()' (used when the
NF_CONNTRACK_EVENTS config option is not enabled) had not been updated
when the calling convention changed.

This was introduced by commit a71996fc
("netfilter: netns nf_conntrack: pass conntrack to
nf_conntrack_event_cache() not skb")

Tssk.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits)
  myri10ge: update driver version number to 1.4.3-1.369
  r8169: add shutdown handler
  r8169: preliminary 8168d support
  r8169: support additional 8168cp chipset
  r8169: change default behavior for mildly identified 8168c chipsets
  r8169: add a new 8168cp flavor
  r8169: add a new 8168c flavor (bis)
  r8169: add a new 8168c flavor
  r8169: sync existing 8168 device hardware start sequences with vendor driver
  r8169: 8168b Tx performance tweak
  r8169: make room for more specific 8168 hardware start procedure
  r8169: shuffle some registers handling around (8168 operation only)
  r8169: new phy init parameters for the 8168b
  r8169: update phy init parameters
  r8169: wake up the PHY of the 8168
  af_key: fix SADB_X_SPDDELETE response
  ath9k: Fix return code when ath9k_hw_setpower() fails on reset
  ath9k: remove nasty FAIL macro from ath9k_hw_reset()
  gre: minor cleanups in netlink interface
  gre: fix copy and paste error
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Check that last search entry resume key is valid
  [CIFS] make sure we have the right resume info before calling CIFSFindNext
  [CIFS]  clean up error handling in cifs_unlink
  [CIFS] fix some settings of cifsAttrs after calling SetFileInfo and SetPathInfo
  cifs: explicitly revoke SPNEGO key after session setup
  cifs: Convert cifs to new aops.
  [CIFS] update DOS attributes in cifsInode if we successfully changed them
  cifs: remove NULL termination from rename target in CIFSSMBRenameOpenFIle
  cifs: work around samba returning -ENOENT on SetFileDisposition call
  cifs: fix inverted NULL check after kmalloc
  [CIFS] clean up upcall handling for dns_resolver keys
  [CIFS]  fix busy-file renames and refactor cifs_rename logic
  cifs: add function to set file disposition
  [CIFS] add constants for string lengths of keynames in SPNEGO upcall string
  cifs: move rename and delete-on-close logic into helper function
  cifs: have find_writeable_file prefer filehandles opened by same task
  cifs: don't use GFP_KERNEL with GFP_NOFS
  [CIFS] use common code for turning off ATTR_READONLY in cifs_unlink
  cifs: clean up variables in cifs_unlink

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (49 commits)
  MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq
  MIPS: Move ptrace prototypes to ptrace.h
  MIPS: Ptrace support for HARDWARE_WATCHPOINTS
  MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
  MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
  MIPS: Probe watch registers and report configuration.
  MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  MIPS: Add HARDWARE_WATCHPOINTS configure option.
  MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.
  MIPS: TXx9: Add TX4939 ATA support (v2)
  MIPS: Rewrite spinlocks to ticket locks.
  MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.
  MIPS: IP checksums: Remove unncessary .set pseudos
  MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.
  MIPS: Move headfiles to new location below arch/mips/include
  MIPS: Alchemy: rename directory
  MIPS: Optimize get_user and put_user for 64-bit
  MIPS: TXx9: Implement prom_free_prom_memory
  MIPS: TXx9: Add RBTX4939 board support
  MIPS: TXx9: Add TX4939 SoC support
  ...

* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits)
  ALSA: hda: VREF powerdown for headphones
  ALSA: hda: STAC_HP_M4
  ALSA: ASoC: Check for machine type in GTA01 machine driver
  ALSA: mtpav - Fix race in probe
  ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
  ALSA: Add a note on dependency of RTC stuff
  ALSA: ASoC: add new param mux to dapm_mux_update_power
  ALSA: Increase components array size
  ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver
  ALSA: hda: comment typo fix
  ALSA: hda: comment typo fix
  ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI
  ALSA: snd-usb-audio: support for Edirol UA-4FX device
  ALSA: usb - Fix possible Oops at USB-MIDI disconnection
  ALSA: hda - Fix another ALC889A (rev 0x100101)
  ALSA: hda: add more board-specific information for Realtek ALC662 rev1
  ALSA: Correct Vladimir Barinov's e-mail address
  ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards
  ALSA: hda: SPDIF stream muting support
  ALSA: hda: appletv support
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (27 commits)
  [S390] Fix checkstack for s390
  [S390] fix initialization of stp
  [S390] 3215: Remove tasklet.
  [S390] console flush on panic / reboot
  [S390] introduce dirty bit for kvm live migration
  [S390] Add ioctl support for EMC Symmetrix Subsystem Control I/O
  [S390] xpram: per device block request queues.
  [S390] dasd: fix message flood for unsolicited interrupts
  [S390] Move private simple udelay function to arch/s390/lib/delay.c.
  [S390] dcssblk: add >2G DCSSs support and stacked contiguous DCSSs support.
  [S390] ptrace changes
  [S390] s390: use sys_pause for 31bit pause entry point
  [S390] qdio enhanced SIGA (iqdio) support.
  [S390] cio: fix cio_tpi.
  [S390] cio: Correct use of ! and &
  [S390] cio: inline assembly cleanup
  [S390] bus_id -> dev_set_name() for css and ccw busses
  [S390] bus_id ->dev_name() conversions in qdio
  [S390] Use s390_root_dev_* in kvm_virtio.
  [S390] more bus_id -> dev_name conversions
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix BUG: using smp_processor_id() in preemptible code
  [CPUFREQ] Don't export governors for default governor
  [CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governor
  [CPUFREQ][5/6] cpufreq: Changes to get_cpu_idle_time_us(), used by ondemand governor
  [CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differential
  [CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for idle-microaccounting
  [CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software coordination
  [CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg()
  [CPUFREQ] use deferrable delayed work init in conservative governor
  [CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving cpufreq_cpu_put
  [CPUFREQ] add error handling for cpufreq_register_governor() error
  [CPUFREQ] acpi-cpufreq: add error handling for cpufreq_register_driver() error
  [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/powernow-k6.c
  [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/elanfreq.c

This patchs defines the number of built-in the GPIOs present
on the SoC as Documentation/gpio.txt recommends to do.
Define irq_to_gpio/gpio_to_irq to return the right values so that
it fixes a compilation error on drivers/gpio/gpiolib.c
when enabling debugfs.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is the final part of the watch register patch.  Here we hook up
ptrace so that the user space debugger (gdb), can set and read the
registers.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Here we hook up the scheduler.  Whenever we switch to a new process,
we check to see if the watch registers should be installed, and do it
if needed.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Here we hook up the watch exception handler so that it sends SIGTRAP when
the hardware watch registers are triggered.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Probe for watch register characteristics, and report them in /proc/cpuinfo.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is the main support code for the patch.  Here we just add the
code, the following patches hook it up.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/include/asm/watch.h
 create mode 100644 arch/mips/kernel/watch.c

This is automatically set for all MIPS32 and MIPS64 processors.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add a helper routine to register tx4939ide driver and use it on
RBTX4939 board.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Based on patch by Chad Reese of Cavium Networks.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

They possibly silence meaningful warnings ...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's more than the au1000 these days.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A long for the error value leads to unnecessary sign extensions.  This
patch shrinks an ip27_defconfig kernel build with gcc 4.3.0 by 2256 bytes.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/txx9/rbtx4939/Makefile
 create mode 100644 arch/mips/txx9/rbtx4939/irq.c
 create mode 100644 arch/mips/txx9/rbtx4939/prom.c
 create mode 100644 arch/mips/txx9/rbtx4939/setup.c
 create mode 100644 include/asm-mips/txx9/rbtx4939.h

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/pci/pci-tx4939.c
 create mode 100644 arch/mips/txx9/generic/irq_tx4939.c
 create mode 100644 arch/mips/txx9/generic/setup_tx4939.c
 create mode 100644 include/asm-mips/txx9/tx4939.h

Add leds-gpio platform device for controlling LEDs connected to IOC on
RBTX49XX and JMR3927 board.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The IOC interrupt status register on RBTX49XX only have 8 bits.  Use
8-bit version of __fls() to optimize interrupt handlers.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

TXx9 SoCs have pin multiplex.  Stop some controller modules which can
not be used due to pin configurations.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Routerboard 532 bootloader passes the korina ethernet
MAC adapter address to the kernel on the command line.
Document this in the kernel-parameters file.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch converts the rb532 code to use gpio library
and register its gpio chip.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch removes these two unused functions :
rc32434_sync_delay and rc32434_sync_udelay
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch cleans up headers and regroups informations to
where they should reside. While moving, try to have a
consistant naming for defines.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We are no longer using setup_serial_port. So just remove it
from the prom code.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When there is only platform device of the same type, id = -1
should be used, fix this.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch replaces a raw read using volatiles
with a readl.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We are no longer using gpio bootup state, so do not export
it and do not parse the kernel command line tag for it.
Instead we provide gpio-keys for the button the gpio bootup
state was checking.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes the misuse of virtual addresses for the GPIO and third
device controller which would lead to problems while accessing ioremap'd
registers.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>