a long time ago by the commit

  commit 93456b6d
  Author: Denis V. Lunev <den@openvz.org>
  Date:   Thu Jan 10 03:23:38 2008 -0800

    [IPV4]: Unify access to the routing tables.

the defenition of FIB_HASH_TABLE size has obtained wrong dependency:
it should depend upon CONFIG_IP_MULTIPLE_TABLES (as was in the original
code) but it was depended from CONFIG_IP_ROUTE_MULTIPATH

This patch returns the situation to the original state.

The problem was spotted by Tingwei Liu.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Tingwei Liu <tingw.liu@gmail.com>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sctp_assoc_lookup_tsn() function searchs which transport a certain TSN
was sent on, if not found in the active_path transport, then go search
all the other transports in the peer's transport_addr_list, however, we
should continue to the next entry rather than break the loop when meet
the active_path transport.
Signed-off-by: NXufeng Zhang <xufeng.zhang@windriver.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When SCTP is done processing a duplicate cookie chunk, it tries
to delete a newly created association.  For that, it has to set
the right association for the side-effect processing to work.
However, when it uses the SCTP_CMD_NEW_ASOC command, that performs
more work then really needed (like hashing the associationa and
assigning it an id) and there is no point to do that only to
delete the association as a next step.  In fact, it also creates
an impossible condition where an association may be found by
the getsockopt() call, and that association is empty.  This
causes a crash in some sctp getsockopts.

The solution is rather simple.  We simply use SCTP_CMD_SET_ASOC
command that doesn't have all the overhead and does exactly
what we need.
Reported-by: NKarl Heiss <kheiss@gmail.com>
Tested-by: NKarl Heiss <kheiss@gmail.com>
CC: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: NVlad Yasevich <vyasevich@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit d13ba512 ("tg3: Remove
SPEED_UNKNOWN checks") cleaned up the autoneg advertisement by
removing some dead code. One effect of this change was that the
advertisement register would not be updated if autoneg is turned off.

This exposed a bug on the 5715 device w.r.t linking. The 5715 defaults
to advertise only 10Mb Full duplex. But with autoneg disabled, it needs
the configured speed enabled in the advertisement register to link up.

This patch adds the work around to advertise all speeds on the 5715 when
autoneg is disabled.
Reported-by: NMarcin Miotk <marcinmiotk81@gmail.com>
Reviewed-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
Just the one bug fix I mentioned before, but it's a pretty important one
as it can cause silent data corruption or IOMMU page faults.

This would be suitable for stable and should apply cleanly to all the
3.x.y branches.  I'm still working through testing of larger sets of
fixes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bond_update_speed_duplex() might sleep while calling underlying slave's
routines. Move it out of atomic context in bond_enslave() and remove it
from bond_miimon_commit() - it was introduced by commit 546add79, however
when the slave interfaces go up/change state it's their responsibility to
fire NETDEV_UP/NETDEV_CHANGE events so that bonding can properly update
their speed.

I've tested it on all combinations of ifup/ifdown, autoneg/speed/duplex
changes, remote-controlled and local, on (not) MII-based cards. All changes
are visible.
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit fae50823 ("net: ethernet: davinci_cpdma: Add boundary for rx
and tx descriptors") introduced a function to check the current
allocation state of tx packets. The return value is taken into account
to stop the netqork queue on the adapter in case there are no free
slots.

However, cpdma_check_free_tx_desc() returns 'true' if there is room in
the bitmap, not 'false', so the usage of the function is wrong.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Reported-by: NSven Neumann <s.neumann@raumfeld.com>
Reported-by: NAndreas Fenkart <andreas.fenkart@streamunlimited.com>
Tested-by: NMugunthan V N <mugunthanvnm@ti.com>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Tested-by: NAndreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using TX push when notifying the NIC of multiple new descriptors in
the ring will very occasionally cause the TX DMA engine to re-use an
old descriptor.  This can result in a duplicated or partly duplicated
packet (new headers with old data), or an IOMMU page fault.  This does
not happen when the pushed descriptor is the only one written.

TX push also provides little latency benefit when a packet requires
more than one descriptor.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

[ Bug added added in commit 05e8ef4a (net: factor out
  skb_mac_gso_segment() from skb_gso_segment() ) ]

move vlan_depth out of while loop, or else vlan_depth always is ETH_HLEN,
can not be increased, and lead to infinite loop when frame has two vlan headers.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  k is u32 which never < 0, need type cast, or cause issue.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NMircea Gherzan <mgherzan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__netpoll_cleanup() is called in netconsole_netdev_event() while holding a
spinlock. Release/acquire the spinlock before/after it and restart the
loop. Also, disable the netconsole completely, because we won't have chance
after the restart of the loop, and might end up in a situation where
nt->enabled == 1 and nt->np.dev == NULL.
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bridge multicast fast leave feature was added sufficient space
was not reserved in the netlink message. This means the flag may be
lost in netlink events and results of queries.

Found by observation while looking up some netlink stuff for discussion with Vlad.
Problem introduced by commit c2d3babf
Author: David S. Miller <davem@davemloft.net>
Date:   Wed Dec 5 16:24:45 2012 -0500

    bridge: implement multicast fast leave
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Included changes ares:
- fix packet parsing routine to avoid to read beyond the packet boundary
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is needed in order to detect if the timestamp option appears
more than once in a packet, to remove the option if the packet is
fragmented, etc. My previous change neglected to store the option
location when the router addresses were prespecified and Pointer >
Length. But now the option location is also stored when Flag is an
unrecognized value, to ensure these option handling behaviors are
still performed.
Signed-off-by: NDavid Ward <david.ward@ll.mit.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

New scheme calls for 3rd party VPD at offset 0x0 and Chelsio VPD at offset
0x400 of the function.  If no 3rd party VPD is present, then a copy of
Chelsio's VPD will be at offset 0x0 to keep in line with PCI spec which
requires the VPD to be present at offset 0x0.
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com>
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

batadv_iv_ogm_process() accesses the packet using the tt_num_changes
attribute regardless of the real packet len (assuming the length check
was done before). Therefore a length check is needed to avoid reading
random memory.
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>

Pull perf fixes from Ingo Molnar:
 "Misc minor fixes mostly related to tracing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  s390: Fix a header dependencies related build error
  tracing: update documentation of snapshot utility
  tracing: Do not return EINVAL in snapshot when not allocated
  tracing: Add help of snapshot feature when snapshot is empty
  ftrace: Update the kconfig for DYNAMIC_FTRACE

Pull networking fixes from David Miller:

 1) Missing cancel of work items in mac80211 MLME, from Ben Greear.

 2) Fix DMA mapping handling in iwlwifi by using coherent DMA for
    command headers, from Johannes Berg.

 3) Decrease the amount of pressure on the page allocator by using order
    1 pages less in iwlwifi, from Emmanuel Grumbach.

 4) Fix mesh PS broadcast OOPS in mac80211, from Marco Porsch.

 5) Don't forget to recalculate idle state in mac80211 monitor
    interface, from Felix Fietkau.

 6) Fix varargs in netfilter conntrack handler, from Joe Perches.

 7) Need to reset entire chip when command queue fills up in iwlwifi,
    from Emmanuel Grumbach.

 8) The TX antenna value must be valid when calibrations are performed
    in iwlwifi, fix from Dor Shaish.

 9) Don't generate netfilter audit log entries when audit is disabled,
    from Gao Feng.

10) Deal with DMA unit hang on e1000e during power state transitions,
    from Bruce Allan.

11) Remove BUILD_BUG_ON check from igb driver, from Alexander Duyck.

12) Fix lockdep warning on i2c handling of igb driver, from Carolyn
    Wyborny.

13) Fix several TTY handling issues in IRDA ircomm tty driver, from
    Peter Hurley.

14) Several QFQ packet scheduler fixes from Paolo Valente.

15) When VXLAN encapsulates on transmit, we have to reset the netfilter
    state.  From Zang MingJie.

16) Fix jiffie check in net_rx_action() so that we really cap the
    processing at 2HZ.  From Eric Dumazet.

17) Fix erroneous trigger of IP option space exhaustion, when routers
    are pre-specified and we are looking to see if we can insert a
    timestamp, we will have the space.  From David Ward.

18) Fix various issues in benet driver wrt waiting for firmware to
    finish POST after resets or errors.  From Gavin Shan and Sathya
    Perla.

19) Fix TX locking in SFC driver, from Ben Hutchings.

20) Like the VXLAN fix above, when we encap in a TUN device we have to
    reset the netfilter state.  This should fix several strange crashes
    reported by Dave Jones and others.  From Eric Dumazet.

21) Don't forget to clean up MAC address resources when shutting down a
    port in mlx4 driver, from Yan Burman.

22) Fix divide by zero in vmxnet3 driver, from Bhavesh Davda.

23) Fix device statistic regression in tg3 when the driver is using
    phylib, from Nithin Sujir.

24) Fix info leak in several netlink handlers, from Mathias Krause.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits)
  6lowpan: Fix endianness issue in is_addr_link_local().
  rrunner.c: fix possible memory leak in rr_init_one()
  dcbnl: fix various netlink info leaks
  rtnl: fix info leak on RTM_GETLINK request for VF devices
  bridge: fix mdb info leaks
  tg3: Update link_up flag for phylib devices
  ipv6: stop multicast forwarding to process interface scoped addresses
  bridging: fix rx_handlers return code
  netlabel: fix build problems when CONFIG_IPV6=n
  drivers/isdn: checkng length to be sure not memory overflow
  net/rds: zero last byte for strncpy
  bnx2x: Fix SFP+ misconfiguration in iSCSI boot scenario
  bnx2x: Fix intermittent long KR2 link up time
  macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode.
  team: unsyc the devices addresses when port is removed
  bridge: add missing vid to br_mdb_get()
  Fix: sparse warning in inet_csk_prepare_forced_close
  afkey: fix a typo
  MAINTAINERS: Update qlcnic maintainers list
  netlabel: correctly list all the static label mappings
  ...

Pull UML fixes from Richard Weinberger:
 "This update brings various fixes.
  Nothing special...

  In my local queue I have some more fixes which will be sent later to
  you.  3.9 uncovered strange UML issues.  :("

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Use tty_port in SIGWINCH handler
  um: Use tty_port_operations->destruct
  um: fix build failure due to mess-up of sig_info protorype
  um: add missing declaration of 'getrlimit()' and friends
  net : enable tx time stamping in the vde driver.
  hostfs: fix a not needed double check

Pull input updates from Dmitry Torokhov:
 "Except for the largish change to the ALPS driver adding "Dolphin V1"
  support and Wacom getting a new signature of yet another device, the
  rest are straightforward driver fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: mms114 - Fix regulator enable and disable paths
  Input: ads7864 - check return value of regulator enable
  Input: tc3589x-keypad - fix keymap size
  Input: wacom - add support for 0x10d
  Input: ALPS - update documentation for recent touchpad driver mods
  Input: ALPS - add "Dolphin V1" touchpad support
  Input: ALPS - remove unused argument to alps_enter_command_mode()
  Input: cypress_ps2 - fix trackpadi found in Dell XPS12

Commit 877c6856
("perf: Remove include of cgroup.h from perf_event.h") caused
this build failure if PERF_EVENTS is enabled:

   In file included from arch/s390/include/asm/perf_event.h:9:0,
                    from include/linux/perf_event.h:24,
                    from kernel/events/ring_buffer.c:12:
   arch/s390/include/asm/cpu_mf.h: In function 'qctri':
   arch/s390/include/asm/cpu_mf.h:61:12: error: 'EINVAL' undeclared (first use in this function)

cpu_mf.h had an implicit errno.h dependency, which was added
indirectly via cgroups.h but not anymore. Add it explicitly.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Tested-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/51385F79.7000106@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The tty below tty_port might get destroyed by the tty layer
while we hold a reference to it.
So we have to carry tty_port around...
Signed-off-by: NRichard Weinberger <richard@nod.at>

As we setup the SIGWINCH handler in tty_port_operations->activate
it makes sense to tear down it in ->destruct.
Signed-off-by: NRichard Weinberger <richard@nod.at>

arch/um/os-Linux/signal.c:18:8: error: conflicting types for 'sig_info'
In file included from /home/slyfox/linux-2.6/arch/um/os-Linux/signal.c:12:0:
arch/um/include/shared/as-layout.h:64:15: note: previous declaration of 'sig_info' was here
Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
CC: Jeff Dike <jdike@addtoit.com>
CC: Richard Weinberger <richard@nod.at>
CC: "Martin Pärtel" <martin.partel@gmail.com>
CC: Al Viro <viro@zeniv.linux.org.uk>
CC: user-mode-linux-devel@lists.sourceforge.net
CC: user-mode-linux-user@lists.sourceforge.net
CC: linux-kernel@vger.kernel.org
Signed-off-by: NRichard Weinberger <richard@nod.at>

arch/um/os-Linux/start_up.c: In function 'check_coredump_limit':
arch/um/os-Linux/start_up.c:338:16: error: storage size of 'lim' isn't known
arch/um/os-Linux/start_up.c:339:2: error: implicit declaration of function 'getrlimit' [-Werror=implicit-function-declaration]
Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
CC: Jeff Dike <jdike@addtoit.com>
CC: Richard Weinberger <richard@nod.at>
CC: Al Viro <viro@zeniv.linux.org.uk>
CC: user-mode-linux-devel@lists.sourceforge.net
CC: user-mode-linux-user@lists.sourceforge.net
CC: linux-kernel@vger.kernel.org
Signed-off-by: NRichard Weinberger <richard@nod.at>

This new version moves the skb_tx_timestamp in the main uml
driver. This should avoid the need to call this function in each
transport (vde, slirp, tuntap, ...). It also add support for ethtool
get_ts_info.
Signed-off-by: NPaul Chavent <paul.chavent@onera.fr>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

With the commit 3be2be0a we removed vmtruncate,
but actaully there is no need to call inode_newsize_ok() because the checks are
already done in inode_change_ok() at the begin of the function.
Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

When it uses regulators the mms114 driver checks to see if it managed to
acquire regulators and ignores errors. This is not the intended usage and
not great style in general.

Since the driver already refuses to probe if it fails to allocate the
regulators simply make the enable and disable calls unconditional and
add appropriate error handling, including adding cleanup of the
regulators if setup_reg() fails.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

At least print a warning if we can't power the device up.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The keymap size used by tc3589x is too low, leading to the driver
overwriting other people's memory.  Fix this by making the driver
use the automatically allocated keymap provided by
matrix_keypad_build_keymap() instead of allocating one on its own.
Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the event that register_netdev() failed, the rrpriv->evt_ring
allocation would have not been freed.
Signed-off-by: NDavid Oostdyk <daveo@ll.mit.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dcb netlink interface leaks stack memory in various places:
* perm_addr[] buffer is only filled at max with 12 of the 32 bytes but
  copied completely,
* no in-kernel driver fills all fields of an IEEE 802.1Qaz subcommand,
  so we're leaking up to 58 bytes for ieee_ets structs, up to 136 bytes
  for ieee_pfc structs, etc.,
* the same is true for CEE -- no in-kernel driver fills the whole
  struct,

Prevent all of the above stack info leaks by properly initializing the
buffers/structures involved.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initialize the mac address buffer with 0 as the driver specific function
will probably not fill the whole buffer. In fact, all in-kernel drivers
fill only ETH_ALEN of the MAX_ADDR_LEN bytes, i.e. 6 of the 32 possible
bytes. Therefore we currently leak 26 bytes of stack memory to userland
via the netlink interface.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bridging code discloses heap and stack bytes via the RTM_GETMDB
netlink interface and via the notify messages send to group RTNLGRP_MDB
afer a successful add/del.

Fix both cases by initializing all unset members/padding bytes with
memset(0).

Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull namespace bugfixes from Eric Biederman:
 "This is three simple fixes against 3.9-rc1.  I have tested each of
  these fixes and verified they work correctly.

  The userns oops in key_change_session_keyring and the BUG_ON triggered
  by proc_ns_follow_link were found by Dave Jones.

  I am including the enhancement for mount to only trigger requests of
  filesystem modules here instead of delaying this for the 3.10 merge
  window because it is both trivial and the kind of change that tends to
  bit-rot if left untouched for two months."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Use nd_jump_link in proc_ns_follow_link
  fs: Limit sys_mount to only request filesystem modules (Part 2).
  fs: Limit sys_mount to only request filesystem modules.
  userns: Stop oopsing in key_change_session_keyring

It is a Wacom device found in Fujitsu Lifebook T902.
Signed-off-by: NStephan Frank <sfrank@cs.tu-berlin.de>
Acked-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

There is a more complete atmel patch-series out by Nick Dyer that fixes
this and other things, but in the meantime this is the minimal thing to
get the touchscreen going on (at least my) Pixel Chromebook.

Not that I want my dirty fingers near that beautiful screen, but it
seems that a non-initialized touchscreen will also end up being a
constant wakeup source, so you have to disable it to go to sleep.  And
it's easier to just fix the initialization sequence.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update proc_ns_follow_link to use nd_jump_link instead of just
manually updating nd.path.dentry.

This fixes the BUG_ON(nd->inode != parent->d_inode) reported by Dave
Jones and reproduced trivially with mkdir /proc/self/ns/uts/a.

Sigh it looks like the VFS change to require use of nd_jump_link
happend while proc_ns_follow_link was baking and since the common case
of proc_ns_follow_link continued to work without problems the need for
making this change was overlooked.

Cc: stable@vger.kernel.org
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>