This is part of a series of patches which are introducing the
gfs2_rbm structure throughout the block allocation code. The
main aim of this part is to create a search function which can
deal directly with struct gfs2_rbm. In this case it specifies
the initial position at which to start the search and also the
point at which the search terminates.

The net result of this is to clean up the search code and make
it rather more readable, and the various possible exceptions which
may occur during the search are partitioned into their own functions.

There are some bug fixes too. We should not be checking the reservations
while allocating extents - the time for that is when we are searching
for where to put the extent, not when we've already made that decision.

Also, rgblk_search had two uses, and in only one of those cases did
it make sense to check for reservations. This is fixed in the new
gfs2_rbm_find function, which has a cleaner interface.

The reservation checking has been improved by always checking for
contiguous reservations, and returning the first free block after
all contiguous reservations. This is done under the spin lock to
ensure consistancy of the tree.

The allocation of extents is now in all cases done by the existing
allocation code, and if there is an active reservation, that is updated
after the fact. Again this is done under the spin lock, since it entails
changing the lookup key for the reservation in question.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch introduces a new structure, gfs2_rbm, which is a
tuple of a resource group, a bitmap within the resource group
and an offset within that bitmap. This is designed to make
manipulating these sets of variables easier. There is also a
new helper function which converts this representation back
to a disk block address.

In addition, the rbtree nodes which are used for the reservations
were not being correctly initialised, which is now fixed. Also,
the tracing was not passing through the inode where it should
have been. That is mostly fixed aside from one corner case. This
needs to be revisited since there can also be a NULL rgrp in
some cases which results in the device being incorrect in the
trace.

This is intended to be the first step towards cleaning up some
of the allocation code, and some further bug fixes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The rs_requested field is left over from the original allocation
code, however this should have been a parameter passed to the
various functions from gfs2_inplace_reserve() and not a member of the
reservation structure as the value is not required after the
initial allocation.

This also helps simplify the code since we no longer need to set
the rs_requested to zero. Also the gfs2_inplace_release()
function can also be simplified since the reservation structure
will always be defined when it is called, and the only remaining
task is to unlock the rgrp if required. It can also now be
called unconditionally too, resulting in a further simplification.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch reduces GFS2 file fragmentation by pre-reserving blocks. The
resulting improved on disk layout greatly speeds up operations in cases
which would have resulted in interlaced allocation of blocks previously.
A typical example of this is 10 parallel dd processes, each writing to a
file in a common dirctory.

The implementation uses an rbtree of reservations attached to each
resource group (and each inode).
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Instead of reading in the resource groups when gfs2 is checking
for free space to allocate from, gfs2 can store the necessary infromation
in the resource group's lvb.  Also, instead of searching for unlinked
inodes in every resource group that's checked for free space, gfs2 can
store the number of unlinked but inodes in the lvb, and only check for
unlinked inodes if it will find some.

The first time a resource group is locked, the lvb must initialized.
Since this involves counting the unlinked inodes in the resource group,
this takes a little extra time.  But after that, if the resource group
is locked with GL_SKIP, the buffer head won't be read in unless it's
actually needed.

Enabling the resource groups lvbs is done via the rgrplvb mount option.  If
this option isn't set, the lvbs will still be set and updated, but they won't
be verfied or used by the filesystem.  To safely turn on this option, all of
the nodes mounting the filesystem must be running code with this patch, and
the filesystem must have been completely unmounted since they were updated.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch moves the ancillary quota data structures into the
block reservations structure. This saves GFS2 some time and
effort in allocating and deallocating the qadata structure.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The "nodir" mode (statically assign master nodes instead
of using the resource directory) has always been highly
experimental, and never seriously used.  This commit
fixes a number of problems, making nodir much more usable.

- Major change to recovery: recover all locks and restart
  all in-progress operations after recovery.  In some
  cases it's not possible to know which in-progess locks
  to recover, so recover all.  (Most require recovery
  in nodir mode anyway since rehashing changes most
  master nodes.)

- Change the way nodir mode is enabled, from a command
  line mount arg passed through gfs2, into a sysfs
  file managed by dlm_controld, consistent with the
  other config settings.

- Allow recovering MSTCPY locks on an rsb that has not
  yet been turned into a master copy.

- Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages
  from a previous, aborted recovery cycle.  Base this
  on the local recovery status not being in the state
  where any nodes should be sending LOCK messages for the
  current recovery cycle.

- Hold rsb lock around dlm_purge_mstcpy_locks() because it
  may run concurrently with dlm_recover_master_copy().

- Maintain highbast on process-copy lkb's (in addition to
  the master as is usual), because the lkb can switch
  back and forth between being a master and being a
  process copy as the master node changes in recovery.

- When recovering MSTCPY locks, flag rsb's that have
  non-empty convert or waiting queues for granting
  at the end of recovery.  (Rename flag from LOCKS_PURGED
  to RECOVER_GRANT and similar for the recovery function,
  because it's not only resources with purged locks
  that need grant a grant attempt.)

- Replace a couple of unnecessary assertion panics with
  error messages.
Signed-off-by: NDavid Teigland <teigland@redhat.com>

This patch eliminates the gfs2_log_element data structure and
rolls its two components into the gfs2_bufdata. This makes the code
easier to understand and makes it easier to migrate to a rbtree
to keep the list sorted.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch eliminates gfs2 superblock variable sd_log_le_rg which
is no longer used.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is another clean up in the logging code. This per-transaction
list was largely unused. Its main function was to ensure that the
number of buffers in a transaction was correct, however that counter
was only used to check the number of buffers in the bd_list_tr, plus
an assert at the end of each transaction. With the assert now changed
to use the calculated buffer counts, we can remove both bd_list_tr and
its associated counter.

This should make the code easier to understand as well as shrinking
a couple of structures.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Prior to this patch, we have two ways of sending i/o to the log.
One of those is used when we need to allocate both the data
to be written itself and also a buffer head to submit it. This
is done via sb_getblk and friends. This is used mostly for writing
log headers.

The other method is used when writing blocks which have some
in-place counterpart. This is the case for all the metadata
blocks which are journalled, and when journaled data is in use,
for unescaped journalled data blocks.

This patch replaces both of those two methods, and about half
a dozen separate i/o submission points with a single i/o
submission function. We also go direct to bio rather than
using buffer heads, since this allows us to build i/o
requests of the maximum size for the block device in
question. It also reduces the memory required for flushing
the log, which can be very useful in low memory situations.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Over time, we've slowly eliminated the use of sd_rindex_mutex.
Up to this point, it was only used in two places: function
gfs2_ri_total (which totals the file system size by reading
and parsing the rindex file) and function gfs2_rindex_update
which updates the rgrps in memory. Both of these functions have
the rindex glock to protect them, so the rindex is unnecessary.
Since gfs2_grow writes to the rindex via the meta_fs, the mutex
is in the wrong order according to the normal rules. This patch
eliminates the mutex entirely to avoid the problem.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The stats are divided into two sets: those relating to the
super block and those relating to an individual glock. The
super block stats are done on a per cpu basis in order to
try and reduce the overhead of gathering them. They are also
further divided by glock type.

In the case of both the super block and glock statistics,
the same information is gathered in each case. The super
block statistics are used to provide default values for
most of the glock statistics, so that newly created glocks
should have, as far as possible, a sensible starting point.

The statistics are divided into three pairs of mean and
variance, plus two counters. The mean/variance pairs are
smoothed exponential estimates and the algorithm used is
one which will be very familiar to those used to calculation
of round trip times in network code.

The three pairs of mean/variance measure the following
things:

 1. DLM lock time (non-blocking requests)
 2. DLM lock time (blocking requests)
 3. Inter-request time (again to the DLM)

A non-blocking request is one which will complete right
away, whatever the state of the DLM lock in question. That
currently means any requests when (a) the current state of
the lock is exclusive (b) the requested state is either null
or unlocked or (c) the "try lock" flag is set. A blocking
request covers all the other lock requests.

There are two counters. The first is there primarily to show
how many lock requests have been made, and thus how much data
has gone into the mean/variance calculations. The other counter
is counting queueing of holders at the top layer of the glock
code. Hopefully that number will be a lot larger than the number
of dlm lock requests issued.

So why gather these statistics? There are several reasons
we'd like to get a better idea of these timings:

1. To be able to better set the glock "min hold time"
2. To spot performance issues more easily
3. To improve the algorithm for selecting resource groups for
allocation (to base it on lock wait time, rather than blindly
using a "try lock")
Due to the smoothing action of the updates, a step change in
some input quantity being sampled will only fully be taken
into account after 8 samples (or 4 for the variance) and this
needs to be carefully considered when interpreting the
results.

Knowing both the time it takes a lock request to complete and
the average time between lock requests for a glock means we
can compute the total percentage of the time for which the
node is able to use a glock vs. time that the rest of the
cluster has its share. That will be very useful when setting
the lock min hold time.

The other point to remember is that all times are in
nanoseconds. Great care has been taken to ensure that we
measure exactly the quantities that we want, as accurately
as possible. There are always inaccuracies in any
measuring system, but I hope this is as accurate as we
can reasonably make it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

If the first mounter fails to recover one of the journals
during mount, the mount should fail.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Previously, a spectator mount would not even attempt to do
journal recovery for a failed node.  This meant that if all
mounted nodes were spectators, everyone would be stuck after
a node failed, all waiting for recovery to be performed.
This is unnecessary since the failed node had a clean journal.

Instead, allow a spectator mount to do a partial "read only"
recovery, which means it will check if the failed journal is
clean, and if so, report a successful recovery.  If the failed
journal is not clean, it reports that journal recovery failed.
This makes it work the same as a read only mount on a read only
block device.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This new method of managing recovery is an alternative to
the previous approach of using the userland gfs_controld.

- use dlm slot numbers to assign journal id's
- use dlm recovery callbacks to initiate journal recovery
- use a dlm lock to determine the first node to mount fs
- use a dlm lock to track journals that need recovery
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch separates the code pertaining to allocations into two
parts: quota-related information and block reservations.
This patch also moves all the block reservation structure allocations to
function gfs2_inplace_reserve to simplify the code, and moves
the frees to function gfs2_inplace_release.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch removes the vestigial variable al_alloced from
the gfs2_alloc structure. This is another baby step toward
multi-block reservations.

My next planned step is to decouple the quota variables
from the gfs2_alloc structure so we can use a different
method for allocations.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The two variables being initialised in gfs2_inplace_reserve
to track the file & line number of the caller are never
used, so we might as well remove them.

If something does go wrong, then a stack trace is probably
more useful anyway.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

GFS2's fallocate code currently goes through the page cache. Since it's only
writing to the end of the file or to holes in it, it doesn't need to, and it
was causing issues on low memory environments. This patch pulls in some of
Steve's block allocation work, and uses it to simply allocate the blocks for
the file, and zero them out at allocation time.  It provides a slight
performance increase, and it dramatically simplifies the code.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This means that after the initial allocation for any inode, the
last used resource group is cached in the inode for future use.
This drastically reduces the number of lookups of resource
groups in the common case, and this the contention on that
data structure.

The allocation algorithm is the same as previously, except that we
always check to see if the goal block is within the cached rgrp
first before going to the rbtree to look one up.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Since we have ruled out supporting online filesystem shrink,
it is possible to make the resource group list append only
during the life of a super block. This gives several benefits:

Firstly, we only need to read new rindex elements as they are added
rather than needing to reread the whole rindex file each time one
element is added.

Secondly, the rindex glock can be held for much shorter periods of
time, and is completely removed from the fast path for allocations.
The lock is taken in shared mode only when updating the resource
groups when the first allocation occurs, and after a grow has
taken place.

Thirdly, this results in a reduction in code size, and everything
gets a lot simpler to understand in this area.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.

Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.

Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.

However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.

The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.

This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.

The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.

In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>

If we have got far enough through the inode allocation code
path that an inode has already been allocated, then we must
call iput to dispose of it, if an error occurs during a
later part of the process. This will always be the final iput
since there will be no other references to the inode.

Unlike when the inode has been unlinked, its block state will
be GFS2_BLKST_INODE rather than GFS2_BLKST_UNLINKED so we need
to skip the test in ->evict_inode() for this one case in order
to ensure that it will be deallocated correctly. This patch adds
a new flag in order to ensure that this will happen correctly.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch is a performance improvement for GFS2 in a clustered
environment. It makes the glock hold time self-adjusting.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch adds a cache for the hash table to the directory code
in order to help simplify the way in which the hash table is
accessed. This is intended to be a first step towards introducing
some performance improvements in the directory code.

There are two follow ups that I'm hoping to see fairly shortly. One
is to simplify the hash table reading code now that we always read the
complete hash table, whether we want one entry or all of them. The
other is to introduce readahead on the heads of the hash chains
which are referred to from the table.

The hash table is a maximum of 128k in size, so it is not worth trying
to read it in small chunks.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

There is a potential race during filesystem mounting which has recently
been reported. It occurs when the userland gfs_controld is able to
process requests fast enough that it tries to use the sysfs interface
before the lock module is properly initialised. This is a pretty
unusual case as normally the lock module initialisation is very quick
compared with gfs_controld.

This patch adds an interruptible completion which is used to ensure that
userland will wait for the initialisation of the lock module to
complete.

There are other potential solutions to this problem, but this is the
quickest at this stage and has been tested both with and without
mount.gfs2 present in the system.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Reported-by: NDavid Booher <dbooher@adams.net>

The VFS superblock structure now has a UUID field, so we can use that
in preference to the UUID field in the GFS2 superblock now.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch adds writeback_control to writing back the AIL
list. This means that we can then take advantage of the
information we get in ->write_inode() in order to set off
some pre-emptive writeback.

In addition, the AIL code is cleaned up a bit to make it
a bit simpler to understand.

There is still more which can usefully be done in this area,
but this is a good start at least.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The GLF_LRU flag introduced in the previous patch can be
used to check if a glock is on the lru list when a new
holder is queued and if so remove it, without having first
to get the lru_lock.

The main purpose of this patch however is to optimise the
glocks left over when an inode at end of life is being
evicted. Previously such glocks were left with the GLF_LFLUSH
flag set, so that when reclaimed, each one required a log flush.
This patch resets the GLF_LFLUSH flag when there is nothing
left to flush thus preventing later log flushes as glocks are
reused or demoted.

In order to do this, we need to keep track of the number of
revokes which are outstanding, and also to clear the GLF_LFLUSH
bit after a log commit when only revokes have been processed.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This adds support for two new flags. One keeps track of whether
the glock is on the LRU list or not. The other isn't really a
flag as such, but an indication of whether the glock has an
attached object or not. This indication is reported without
any locking, which is ok since we do not dereference the object
pointer but merely report whether it is NULL or not.

Also, this fixes one place where a tracepoint was missing, which
was at the point we remove deallocated blocks from the journal.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The log lock is currently used to protect the AIL lists and
the movements of buffers into and out of them. The lists
are self contained and no log specific items outside the
lists are accessed when starting or emptying the AIL lists.

Hence the operation of the AIL does not require the protection
of the log lock so split them out into a new AIL specific lock
to reduce the amount of traffic on the log lock. This will
also reduce the amount of serialisation that occurs when
the gfs2_logd pushes on the AIL to move it forward.

This reduces the impact of log pushing on sequential write
throughput.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Immediately after being synced to disk, cached quotas are zeroed out and a
subsequent access of the cached quotas results in incorrect zero values. This
meant that gfs2 assumed the actual usage to be the zero (or near-zero) usage
values it found in the cached quotas and comparison against warn/limits never
triggered a quota violation.

This patch adds a new flag QDF_REFRESH that is set after a sync so that the
cached quotas are forcefully refreshed from disk on a subsequent access on
seeing this flag set.

Resolves: rhbz#675944
Signed-off-by: NAbhi Das <adas@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This has a number of advantages:

 - Reduces contention on the hash table lock
 - Makes the code smaller and simpler
 - Should speed up glock dumps when under load
 - Removes ref count changing in examine_bucket
 - No longer need hash chain lock in glock_put() in common case

There are some further changes which this enables and which
we may do in the future. One is to look at using SLAB_RCU,
and another is to look at using a per-cpu counter for the
per-sb glock counter, since that is touched twice in the
lifetime of each glock (but only used at umount time).
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can only merge the fields into a bitfield if the locking
rules for them are the same. In this case gl_spin covers all
of the fields (write side) but a couple of them are used
with GLF_LOCK as the read side lock, which should be ok
since we know that the field in question won't be changing
at the time.

The gl_req setting has to be done earlier (in glock.c) in order
to place it under gl_spin. The gl_reply setting also has to be
brought under gl_spin in order to comply with the new rules.

This saves 4*sizeof(unsigned int) per glock.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>

Recently a feature was added to GFS2 to allow journal id allocation
via sysfs. This patch builds upon that so that a negative journal id
will be treated as an error code to be passed back as the return code
from mount. This allows termination of the mount process if there is
a failure.

Also, the process has been updated so that the kernel will wait
for a journal id, even in the "spectator" case. This is required
in order to avoid mounting a filesystem in case there is an error
while joining the cluster. In the spectator case, 0 is written into
the file to indicate that all is well, and that mount should continue.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This option has never done anything useful. Also at the same time
this cleans up the sb checks which are done at mount time. The
debug option will be accepted, but ignored in future. Since it
didn't do anything, there didn't seem much point in retaining it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This option defaulted to on for lock_nolock mounts and off
otherwise. The only function was to avoid the revalidation of
dentries. In the cluster case, that is entirely pointless and
liable to cause coherency problems.

The patch changes the revalidation to depend upon whether the
fs is a local or cluster fs (i.e. it follows the existing default
behaviour). I very much doubt anybody ever used this option as
there is no reason to. Even so we will continue to accept it
on the mount command line, but ignore it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is been a no-op for a very long time now. I'm pretty sure
nobody uses it, but just in case we'll still accept it on the
command line, but ignore it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>