Now nothing prevents GPIO driver from being unloaded if its gpios
were requested as GPIO IRQs only (without calling gpio_request()).

Hence, add calls of try_module_get()/module_put() into
gpiochip_irq_reqres/relres() to track such scenario properly.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The spinlock 'slock' is used now to protect pcf857x_irq() from itself
which is unnecessary (especially after switching to use threaded
IRQs). Hence, remove it and use mutex to protect device data in IRQ
handler.

Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Currently gpio modules are runtime-resumed at probe time. This means the
gpio module will be active all the time (except during system suspend,
if not configured as a wake-up source).

While an R-Car Gen2 gpio module retains pins configured for output at
the requested level while put in standby mode, gpio registercannot be
accessed while suspended.  Unfortunately pm_runtime_get_sync() cannot be
called from all contexts where gpio register access is needed. Hence
move the Runtime PM handling from probe/remove time to gpio request/free
time, which is probably the best we can do.

On r8a7791/koelsch, gpio modules 0, 1, 3, and 4 are now suspended during
normal use (gpio2 is used for LEDs and regulators, gpio5 for keys, gpio6
for SD-Card CD & WP, gpio7 for keys and regulators).
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since commit 59032702 ("ARM: shmobile: Remove legacy platform
devices from EMEV2 SoC code"), EMMA Mobile SoCs are only supported in
generic DT-only ARM multi-platform builds.  The driver doesn't need to
use platform data anymore, hence remove platform data configuration.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Tested-by: NNiklas Söderlund <niso@kth.se>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add ZTE zx296702 GPIO controller support
Signed-off-by: NJun Nie <jun.nie@linaro.org>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The variable "desc" is only used for storing the return value at the
end of the function.  It is unneeded.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The driver gpio-mvebu.c does not depend on gpio-generic.c at all.
Drop unneeded "select GPIO_GENERIC".
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This driver calls of_mm_gpiochip_add() to add a memory mapped gpio
chip.  So, of_mm_gpiochip_remove() should be used when removing it.

The direct call of gpiochip_remove() misses unmapping the register
and freeing the label.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NTien Hock Loh <thloh@altera.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The remove callback never succeeds, which seems odd.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NTien Hock Loh <thloh@altera.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The driver gpio-altera.c does not depend on gpio-generic.c at all.
Drop unneeded "select GPIO_GENERIC".
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NTien Hock Loh <thloh@altera.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This driver is tristate, so it should be cleanable.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

gpiochip_add_pingroup_range() has a pctldev argument, not pinctrl.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Allow to determine the current direction configuration by
reading back from the direction register.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This reverts commit dec4f799.

Jörg Otte reports a NULL pointder dereference due to this commit, as
'crtc_state' very much can be NULL:

        crtc_state = state->base.state ?
                intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;

So the change to test 'crtc_state->base.active' cannot possibly be
correct as-is.

There may be some other minimal fix (like just checking crtc_state for
NULL), but I'm just reverting it now for the rc2 release, and people
like Daniel Vetter who actually know this code will figure out what the
right solution is in the longer term.
Reported-and-bisected-by: NJörg Otte <jrg.otte@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds hardware assisted scrolling. The code is based upon the
following investigation: https://parisc.wiki.kernel.org/index.php/NGLE#Blitter

A simple 'time ls -la /usr/bin' test shows 1.6x speed increase over soft
copy and 2.3x increase over FBINFO_READS_FAST (prefer soft copy over
screen redraw) on Artist framebuffer.
Signed-off-by: NAlex Ivanov <lausgans@gmail.com>
Signed-off-by: NHelge Deller <deller@gmx.de>

Add support in the NFIT BLK I/O path for the "latch" flag
defined in the "Get Block NVDIMM Flags" _DSM function:

http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf

This flag requires the driver to read back the command register after it
is written in the block I/O path.  This ensures that the hardware has
fully processed the new command and moved the aperture appropriately.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Update the nfit block I/O path to use the new PMEM API and to adhere to
the read/write flows outlined in the "NVDIMM Block Window Driver
Writer's Guide":

http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf

This includes adding support for targeted NVDIMM flushes called "flush
hints" in the ACPI 6.0 specification:

http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf

For performance and media durability the mapping for a BLK aperture is
moved to a write-combining mapping which is consistent with
memcpy_to_pmem() and wmb_blk().
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This reverts commit 63c4fda3 as it
causes issues with detecting 3-finger taps.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100481
Cc: stable@vger.kernel.org
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>

Wider testing reveals that the Fast Debug Channel (FDC) interrupt is
routed through the GIC just fine on Pistachio SoC, even though it
contains interAptiv cores. Clearly the FDC interrupt routing problems
previously observed on interAptiv and proAptiv cores are specific to the
Malta FPGA bitstreams.

Move the workaround for interAptiv and proAptiv out of
gic_get_c0_fdc_int() in the GIC irqchip driver into Malta's
get_c0_fdc_int() platform callback, to allow the Pistachio SoC to use
the FDC interrupt.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Reviewed-by: NAndrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/9748/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The pointer to an AFU in the adapter's list of AFUs can be null
if we're in the process of removing AFUs. The afu_list_lock
doesn't guard against this.

Say we have 2 slices, and we're in the process of removing cxl.
 - We remove the AFUs in order (see cxl_remove). In cxl_remove_afu
   for AFU 0, we take the lock, set adapter->afu[0] = NULL, and
   release the lock.
 - Then we get an slbia. In cxl_slbia we take the lock, and set
   afu = adapter->afu[0], which is NULL.
 - Therefore our attempt to check afu->enabled will blow up.

Therefore, check if afu is a null pointer before dereferencing it.

Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Acked-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Mark (and unmark) device nodes with the POPULATE flag as appropriate.
This is required to avoid multi probing when using I2C and device
overlays containing a mux.
This patch is also more careful with the release of the adapter device
which caused a deadlock with muxes, and does not break the build
on !OF since the node flag accessors are not defined then.
Signed-off-by: NPantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Current code returns 0 if fails to read clock-frequency DT property,
fix it. Also add checking return value of clk_prepare_enable and
propagate return value of devm_request_irq.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Free requested mailbox channel before return error.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

If NO_DMA=y:

    ERROR: "dma_unmap_single" [drivers/i2c/busses/i2c-mt65xx.ko] undefined!
    ERROR: "dma_mapping_error" [drivers/i2c/busses/i2c-mt65xx.ko] undefined!
    ERROR: "dma_map_single" [drivers/i2c/busses/i2c-mt65xx.ko] undefined!

Add a dependency on HAS_DMA to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The firmware class uevent function accessed the "fw_priv->buf" buffer
without the proper locking and testing for NULL.  This is an old bug
(looks like it goes back to 2012 and commit 1244691c: "firmware
loader: introduce firmware_buf"), but for some reason it's triggering
only now in 4.2-rc1.

Shuah Khan is trying to bisect what it is that causes this to trigger
more easily, but in the meantime let's just fix the bug since others are
hitting it too (at least Ingo reports having seen it as well).
Reported-and-tested-by: NShuah Khan <shuahkh@osg.samsung.com>
Acked-by: NMing Lei <ming.lei@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cayman does not have vce.  There were a few places in the
shared cayman/TV code where we were trying to do vce stuff.

v2: remove -ENOENT check
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise we try to clear BO_VAs without an address.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=91141Signed-off-by: NChristian König <christian.koenig@amd.com>
Test-by: hadack@gmx.de
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to allways add the VM clear duplicate of the BO_VA,
no matter what the old status was.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Test-by: hadack@gmx.de
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit ac913490.

We've fixed the underlying problem with cursors, so re-enable
this.

Reviewed-by: NGrigori Goronzy <greg@chown.ath.cx>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Everything is evicted from VRAM before suspend, so we need to make
sure all BOs are unpinned and re-pinned after resume. Fixes broken
mouse cursor after resume introduced by commit b9729b17.

[Michel Dänzer: Add pinning BOs on resume]

v2:
[Alex Deucher: merge cursor unpin into fb unpin loop]

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100541
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in radeon_crtc_cursor_set2, and use
radeon_crtc->cursor_addr in radeon_set_cursor.

This fixes radeon_cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.

Cc: stable@vger.kernel.org
Reviewed-by: NGrigori Goronzy <greg@chown.ath.cx>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently pdd is validate after dereferencing it, which is
not correct, Thus validate pdd before its first use.
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Stolen gets trashed during hibernation, so storing contexts there
is not a very good idea. On my IVB machines this leads to a totally
dead GPU on resume. A reboot is required to resurrect it. So let's
not store contexts where they will get trampled.

This reverts commit 149c86e7.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The old style of memory interleaving swizzled upto the end of the
first even bank of memory, and then used the remainder as unswizzled on
the unpaired bank - i.e. swizzling is not constant for all memory. This
causes problems when we try to migrate memory and so the kernel prevents
migration at all when we detect L-shaped inconsistent swizzling.
However, this issue also extends to userspace who try to manually detile
into memory as the swizzling for an individual page is unknown (it
depends on its physical address only known to the kernel), userspace
cannot correctly swizzle objects.

v2: Mark the global swizzling as unknown rather than adjust the value
reported to userspace.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The "if (pass_size > buf->total)" can underflow so I have changed the
type of size and pass_size to unsigned to avoid this problem.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer ASICs have more VRAM on average and allocating more GART as
well can have advantages. Also see commit edcd26e8.

Ideally, we should scale GART size based on actual VRAM size, but
that requires significant restructuring of initialization.

v2: extract small helper, apply to error paths
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This was regressed by commit 39e7f6f8, although I don't know of any
actual issues caused by it.

The storage domain is read without TTM locking now, but the lock
never helped to prevent any races.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't need to call the (expensive) radeon_bo_wait, checking the
fences via RCU is much faster. The reservation done by radeon_bo_wait
does not save us from any race conditions.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>