- 06 8月, 2014 2 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 David S. Miller 提交于
Conflicts: arch/sparc/mm/init_64.c Conflict was simple non-overlapping additions. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 8月, 2014 7 次提交
-
-
由 David L Stevens 提交于
This patches adds an "install" target to install kernel builds for SPARC, modeled after the i386 script. Signed-off-by: NDavid L Stevens <david.stevens@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrey Utkin 提交于
This commit is a guesswork, but it seems to make sense to drop this break, as otherwise the following line is never executed and becomes dead code. And that following line actually saves the result of local calculation by the pointer given in function argument. So the proposed change makes sense if this code in the whole makes sense (but I am unable to analyze it in the whole). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81641Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NAndrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The LDC handshake could have been asynchronously triggered after ldc_bind() enables the ldc_rx() receive interrupt-handler (and thus intercepts incoming control packets) and before vio_port_up() calls ldc_connect(). If that is the case, ldc_connect() should return 0 and let the state-machine progress. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NKarl Volz <karl.volz@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based almost entirely upon a patch by Christopher Alexander Tobias Schulze. In commit db64fe02 ("mm: rewrite vmap layer") lazy VMAP tlb flushing was added to the vmalloc layer. This causes problems on sparc64. Sparc64 has two VMAP mapped regions and they are not contiguous with eachother. First we have the malloc mapping area, then another unrelated region, then the vmalloc region. This "another unrelated region" is where the firmware is mapped. If the lazy TLB flushing logic in the vmalloc code triggers after we've had both a module unload and a vfree or similar, it will pass an address range that goes from somewhere inside the malloc region to somewhere inside the vmalloc region, and thus covering the openfirmware area entirely. The sparc64 kernel learns about openfirmware's dynamic mappings in this region early in the boot, and then services TLB misses in this area. But openfirmware has some locked TLB entries which are not mentioned in those dynamic mappings and we should thus not disturb them. These huge lazy TLB flush ranges causes those openfirmware locked TLB entries to be removed, resulting in all kinds of problems including hard hangs and crashes during reboot/reset. Besides causing problems like this, such huge TLB flush ranges are also incredibly inefficient. A plea has been made with the author of the VMAP lazy TLB flushing code, but for now we'll put a safety guard into our flush_tlb_kernel_range() implementation. Since the implementation has become non-trivial, stop defining it as a macro and instead make it a function in a C source file. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Fix detection of BREAK on sunsab serial console: BREAK detection was only performed when there were also serial characters received simultaneously. To handle all BREAKs correctly, the check for BREAK and the corresponding call to uart_handle_break() must also be done if count == 0, therefore duplicate this code fragment and pull it out of the loop over the received characters. Patch applies to 3.16-rc6. Signed-off-by: NChristopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Fix regression in bbc i2c temperature and fan control on some Sun systems that causes the driver to refuse to load due to the bbc_i2c_bussel resource not being present on the (second) i2c bus where the temperature sensors and fan control are located. (The check for the number of resources was removed when the driver was ported to a pure OF driver in mid 2008.) Signed-off-by: NChristopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The assumption was that update_mmu_cache() (and the equivalent for PMDs) would only be called when the PTE being installed will be accessible by the user. This is not true for code paths originating from remove_migration_pte(). There are dire consequences for placing a non-valid PTE into the TSB. The TLB miss frramework assumes thatwhen a TSB entry matches we can just load it into the TLB and return from the TLB miss trap. So if a non-valid PTE is in there, we will deadlock taking the TLB miss over and over, never satisfying the miss. Just exit early from update_mmu_cache() and friends in this situation. Based upon a report and patch from Christopher Alexander Tobias Schulze. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 7月, 2014 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull ARM AES crypto fixes from Herbert Xu: "This push fixes a regression on ARM where odd-sized blocks supplied to AES may cause crashes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm-aes - fix encryption of unaligned data crypto: arm64-aes - fix encryption of unaligned data
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Ben Herrenschmidt: "Here are 3 more small powerpc fixes that should still go into .16. One is a recent regression (MMCR2 business), the other is a trivial endian fix without which FW updates won't work on LE in IBM machines, and the 3rd one turns a BUG_ON into a WARN_ON which is definitely a LOT more friendly especially when the whole thing is about retrieving error logs ..." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix endianness of flash_block_list in rtas_flash powerpc/powernv: Change BUG_ON to WARN_ON in elog code powerpc/perf: Fix MMCR2 handling for EBB
-
- 28 7月, 2014 9 次提交
-
-
由 Mikulas Patocka 提交于
Fix the same alignment bug as in arm64 - we need to pass residue unprocessed bytes as the last argument to blkcipher_walk_done. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # 3.13+ Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Mikulas Patocka 提交于
cryptsetup fails on arm64 when using kernel encryption via AF_ALG socket. See https://bugzilla.redhat.com/show_bug.cgi?id=1122937 The bug is caused by incorrect handling of unaligned data in arch/arm64/crypto/aes-glue.c. Cryptsetup creates a buffer that is aligned on 8 bytes, but not on 16 bytes. It opens AF_ALG socket and uses the socket to encrypt data in the buffer. The arm64 crypto accelerator causes data corruption or crashes in the scatterwalk_pagedone. This patch fixes the bug by passing the residue bytes that were not processed as the last parameter to blkcipher_walk_done. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Thomas Falcon 提交于
The function rtas_flash_firmware passes the address of a data structure, flash_block_list, when making the update-flash-64-and-reboot rtas call. While the endianness of the address is handled correctly, the endianness of the data is not. This patch ensures that the data in flash_block_list is big endian when passed to rtas on little endian hosts. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vasant Hegde 提交于
We can continue to read the error log (up to MAX size) even if we get the elog size more than MAX size. Hence change BUG_ON to WARN_ON. Also updated error message. Reported-by: NGopesh Kumar Chaudhary <gopchaud@in.ibm.com> Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Acked-by: NStewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Thomas Gleixner: "A bunch of fixes for perf and kprobes: - revert a commit that caused a perf group regression - silence dmesg spam - fix kprobe probing errors on ia64 and ppc64 - filter kprobe faults from userspace - lockdep fix for perf exit path - prevent perf #GP in KVM guest - correct perf event and filters" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes: Fix "Failed to find blacklist" probing errors on ia64 and ppc64 kprobes/x86: Don't try to resolve kprobe faults from userspace perf/x86/intel: Avoid spamming kernel log for BTS buffer failure perf/x86/intel: Protect LBR and extra_regs against KVM lying perf: Fix lockdep warning on process exit perf/x86/intel/uncore: Fix SNB-EP/IVT Cbox filter mappings perf/x86/intel: Use proper dTLB-load-misses event on IvyBridge perf: Revert ("perf: Always destroy groups on exit")
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "A couple of crash fixes, plus a fix that on 32 bits would cause a missing -ENOSYS for nonexistent system calls" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpu: Fix cache topology for early P4-SMT x86_32, entry: Store badsys error code in %eax x86, MCE: Robustify mcheck_init_device
-
git://git.infradead.org/users/hch/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Christoph Hellwig: "A vfsmount leak fix, and a compile warning fix" * 'vfs-for-3.16' of git://git.infradead.org/users/hch/vfs: fs: umount on symlink leaks mnt count direct-io: fix uninitialized warning in do_direct_IO()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394由 Linus Torvalds 提交于
Pull firewire regression fix from Stefan Richter: "IEEE 1394 (FireWire) subsystem fix: MSI don't work on VIA PCIe controllers with some isochronous workloads (regression since v3.16-rc1)" * tag 'firewire-fix-vt6315' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: disable MSI for VIA VT6315 again
-
- 27 7月, 2014 2 次提交
-
-
由 Linus Torvalds 提交于
Michel Dänzer and a couple of other people reported inexplicable random oopses in the scheduler, and the cause turns out to be gcc mis-compiling the load_balance() function when debugging is enabled. The gcc bug apparently goes back to gcc-4.5, but slight optimization changes means that it now showed up as a problem in 4.9.0 and 4.9.1. The instruction scheduling problem causes gcc to schedule a spill operation to before the stack frame has been created, which in turn can corrupt the spilled value if an interrupt comes in. There may be other effects of this bug too, but that's the code generation problem seen in Michel's case. This is fixed in current gcc HEAD, but the workaround as suggested by Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments when compiling the kernel, which disables the gcc code that causes the problem. This can result in slightly worse debug information for variable accesses, but that is infinitely preferable to actual code generation problems. Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows non-debug builds to verify that the debug build would be identical: we can do export GCC_COMPARE_DEBUG=1 to make gcc internally verify that the result of the build is independent of the "-g" flag (it will make the compiler build everything twice, toggling the debug flag, and compare the results). Without the "-fno-var-tracking-assignments" option, the build would fail (even with 4.8.3 that didn't show the actual stack frame bug) with a gcc compare failure. See also gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801Reported-by: NMichel Dänzer <michel@daenzer.net> Suggested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de> Cc: Jakub Jelinek <jakub@redhat.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Shortly before 3.16-rc1, Dave Jones reported: WARNING: CPU: 3 PID: 19721 at fs/xfs/xfs_aops.c:971 xfs_vm_writepage+0x5ce/0x630 [xfs]() CPU: 3 PID: 19721 Comm: trinity-c61 Not tainted 3.15.0+ #3 Call Trace: xfs_vm_writepage+0x5ce/0x630 [xfs] shrink_page_list+0x8f9/0xb90 shrink_inactive_list+0x253/0x510 shrink_lruvec+0x563/0x6c0 shrink_zone+0x3b/0x100 shrink_zones+0x1f1/0x3c0 try_to_free_pages+0x164/0x380 __alloc_pages_nodemask+0x822/0xc90 alloc_pages_vma+0xaf/0x1c0 handle_mm_fault+0xa31/0xc50 etc. 970 if (WARN_ON_ONCE((current->flags & (PF_MEMALLOC|PF_KSWAPD)) == 971 PF_MEMALLOC)) I did not respond at the time, because a glance at the PageDirty block in shrink_page_list() quickly shows that this is impossible: we don't do writeback on file pages (other than tmpfs) from direct reclaim nowadays. Dave was hallucinating, but it would have been disrespectful to say so. However, my own /var/log/messages now shows similar complaints WARNING: CPU: 1 PID: 28814 at fs/ext4/inode.c:1881 ext4_writepage+0xa7/0x38b() WARNING: CPU: 0 PID: 27347 at fs/ext4/inode.c:1764 ext4_writepage+0xa7/0x38b() from stressing some mmotm trees during July. Could a dirty xfs or ext4 file page somehow get marked PageSwapBacked, so fail shrink_page_list()'s page_is_file_cache() test, and so proceed to mapping->a_ops->writepage()? Yes, 3.16-rc1's commit 68711a74 ("mm, migration: add destination page freeing callback") has provided such a way to compaction: if migrating a SwapBacked page fails, its newpage may be put back on the list for later use with PageSwapBacked still set, and nothing will clear it. Whether that can do anything worse than issue WARN_ON_ONCEs, and get some statistics wrong, is unclear: easier to fix than to think through the consequences. Fixing it here, before the put_new_page(), addresses the bug directly, but is probably the worst place to fix it. Page migration is doing too many parts of the job on too many levels: fixing it in move_to_new_page() to complement its SetPageSwapBacked would be preferable, except why is it (and newpage->mapping and newpage->index) done there, rather than down in migrate_page_move_mapping(), once we are sure of success? Not a cleanup to get into right now, especially not with memcg cleanups coming in 3.17. Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 7月, 2014 13 次提交
-
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "This is radeon and intel fixes, and is a small bit larger than I'm guessing you'd like it to be. - i915: fixes 32-bit highmem i915 blank screen, semaphore hang and runtime pm fix - radeon: gpuvm stability fix for hangs since 3.15, and hang/reboot regression on TN/RL devices, The only slightly controversial one is the change to use GB for the vm_size, which I'm letting through as its a new interface we defined in this merge window, and I'd prefer to have the released kernel have the final interface rather than changing it later" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix cut and paste issue for hawaii. drm/radeon: fix irq ring buffer overflow handling drm/i915: Simplify i915_gem_release_all_mmaps() drm/radeon: fix error handling in radeon_vm_bo_set_addr drm/i915: fix freeze with blank screen booting highmem drm/i915: Reorder the semaphore deadlock check, again drm/radeon/TN: only enable bapm on MSI systems drm/radeon: fix VM IB handling drm/radeon: fix handling of radeon_vm_bo_rmv v3 drm/radeon: let's use GB for vm_size (v2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Here contains only the fixes for the new FireWire bebob driver. All fairly trivial and local fixes, so safe to apply" * tag 'sound-3.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: bebob: Correction for return value of special_clk_ctl_put() in error ALSA: bebob: Correction for return value of .put callback ALSA: bebob: Use different labels for digital input/output ALSA: bebob: Fix a missing to unlock mutex in error handling case
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fix from Guenter Roeck: "Fixes to temperature limit and vrm write operations in smsc47m192 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (smsc47m192) Fix temperature limit and vrm write operations
-
由 Randy Dunlap 提交于
Do not split the PARPORT-related symbols with the new kconfig symbol ARCH_MIGHT_HAVE_PC_PARPORT. The split was causing incorrect display of these symbols -- they were not being displayed together as they should be. Fixes: d90c3eb3 "Kconfig cleanup (PARPORT_PC dependencies)" Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Mark Salter <msalter@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org # for 3.13, 3.14, 3.15 Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge tag 'blackfin-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin fixes from Steven Miao: "smc nor flash PM fix, pinctrl group fix, update defconfig, and build fixes" * tag 'blackfin-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: vmlinux.lds.S: reserve 32 bytes space at the end of data section for XIP kernel defconfig: BF609: update spi config name irq: blackfin sec: drop duplicated sec priority set blackfin: bind different groups of one pinmux function to different state name blackfin: fix some bf5xx boards build for missing <linux/gpio.h> pm: bf609: cleanup smc nor flash
-
由 Steven Miao 提交于
to collect some undefined section to the end of the data section and avoid section overlap Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Steven Miao 提交于
drop smc pin state change code, pin state will be saved in pinctrl-adi2 driver cleanup nor flash init/exit for pm suspend/resume Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "We have two trivial patches in here. One removes the SA_RESTORER #define since on parisc we don't have the sa_restorer field in struct sigaction, the other patch removes an unnecessary memset(). The SA_RESTORER removal patch is scheduled for stable trees, since without it some userspace apps don't build" * 'parisc-3.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Eliminate memset after alloc_bootmem_pages parisc: Remove SA_RESTORER define
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse fixes from Miklos Szeredi: "These two pathes fix issues with the kernel-userspace protocol changes in v3.15" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: add FUSE_NO_OPEN_SUPPORT flag to INIT fuse: s_time_gran fix
-
- 25 7月, 2014 5 次提交
-
-
由 H. Peter Anvin 提交于
Promote one fix for 3.16 This fix was necessary after 9c15a24b ("x86/mce: Improve mcheck_init_device() error handling") went in. What this patch did was, among others, check the return value of misc_register and exit early if it encountered an error. Original code sloppily didn't do that. However, cef12ee5 ("xen/mce: Add mcelog support for Xen platform") made it so that xen's init routine xen_late_init_mcelog runs first. This was needed for the xen mcelog device which is supposed to be independent from the baremetal one. Initially it was reported that misc_register() fails often on xen and that's why it needed fixing. However, it is *supposed* to fail by design, when running in dom0 so that the xen mcelog device file gets registered first. And *then* you need the notifier *not* unregistered on the error path so that the timer does get deleted properly in the CPU hotplug notifier. Btw, this fix is needed also on baremetal in the unlikely event that misc_register(&mce_chrdev_device) fails there too. I was unsure whether to rush it in now and decided to delay it to 3.17. However, xen people wanted it promoted as it breaks xen when doing cpu hotplug there. So, after a bit of simmering in tip/master for initial smoke testing, let's move it to 3.16. It fixes a semi-regression which got introduced in 3.16 so no need for stable tagging. tip/x86/ras contains that exact same commit but we can't remove it there as it is not the last one. It won't cause any merge issues, as I confirmed locally but I should state here the special situation of this one fix explicitly anyway. Thanks. Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Jerome Glisse 提交于
This is a halfway fix for hawaii acceleration. More fixes to come but hopefully isolated to userspace. Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
two more radeon fixes. * 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix irq ring buffer overflow handling drm/radeon: fix error handling in radeon_vm_bo_set_addr
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
This time in time! Just 32bit-pae fix from Hugh, semaphores fun from Chris and a fix for runtime pm cherry-picked from next. Paulo is still working on a fix for runtime pm when X does cursor fun when the display is off, but that one isn't ready yet. * tag 'drm-intel-fixes-2014-07-24' of git://anongit.freedesktop.org/drm-intel: drm/i915: Simplify i915_gem_release_all_mmaps() drm/i915: fix freeze with blank screen booting highmem drm/i915: Reorder the semaphore deadlock check, again
-
由 HIMANGI SARAOGI 提交于
alloc_bootmem and related function always return zeroed region of memory. Thus a memset after calls to these functions is unnecessary. The following Coccinelle semantic patch was used for making the change: @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) ... when != E - memset(E,0,E1); Signed-off-by: NHimangi Saraogi <himangi774@gmail.com> Acked-by: NJulia Lawall <julia.lawall@lip6.fr> Signed-off-by: NHelge Deller <deller@gmx.de>
-