Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 19 10月, 2010 12 次提交
    • D
      xfs: introduced uncached buffer read primitve · 5adc94c2
      由 Dave Chinner 提交于 
      To avoid the need to use cached buffers for single-shot or buffers
cached at the filesystem level, introduce a new buffer read
primitive that bypasses the cache an reads directly from disk.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
      5adc94c2
    • D
      xfs: rename xfs_buf_get_nodaddr to be more appropriate · 686865f7
      由 Dave Chinner 提交于 
      xfs_buf_get_nodaddr() is really used to allocate a buffer that is
uncached. While it is not directly assigned a disk address, the fact
that they are not cached is a more important distinction. With the
upcoming uncached buffer read primitive, we should be consistent
with this disctinction.

While there, make page allocation in xfs_buf_get_nodaddr() safe
against memory reclaim re-entrancy into the filesystem by allowing
a flags parameter to be passed.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
      686865f7
    • D
      xfs: don't use vfs writeback for pure metadata modifications · dcd79a14
      由 Dave Chinner 提交于 
      Under heavy multi-way parallel create workloads, the VFS struggles
to write back all the inodes that have been changed in age order.
The bdi flusher thread becomes CPU bound, spending 85% of it's time
in the VFS code, mostly traversing the superblock dirty inode list
to separate dirty inodes old enough to flush.

We already keep an index of all metadata changes in age order - in
the AIL - and continued log pressure will do age ordered writeback
without any extra overhead at all. If there is no pressure on the
log, the xfssyncd will periodically write back metadata in ascending
disk address offset order so will be very efficient.

Hence we can stop marking VFS inodes dirty during transaction commit
or when changing timestamps during transactions. This will keep the
inodes in the superblock dirty list to those containing data or
unlogged metadata changes.

However, the timstamp changes are slightly more complex than this -
there are a couple of places that do unlogged updates of the
timestamps, and the VFS need to be informed of these. Hence add a
new function xfs_trans_ichgtime() for transactional changes,
and leave xfs_ichgtime() for the non-transactional changes.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
      dcd79a14
    • D
      xfs: lockless per-ag lookups · e176579e
      由 Dave Chinner 提交于 
      When we start taking a reference to the per-ag for every cached
buffer in the system, kernel lockstat profiling on an 8-way create
workload shows the mp->m_perag_lock has higher acquisition rates
than the inode lock and has significantly more contention. That is,
it becomes the highest contended lock in the system.

The perag lookup is trivial to convert to lock-less RCU lookups
because perag structures never go away. Hence the only thing we need
to protect against is tree structure changes during a grow. This can
be done simply by replacing the locking in xfs_perag_get() with RCU
read locking. This removes the mp->m_perag_lock completely from this
path.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
      e176579e
    • D
      xfs: remove debug assert for per-ag reference counting · bd32d25a
      由 Dave Chinner 提交于 
      When we start taking references per cached buffer to the the perag
it is cached on, it will blow the current debug maximum reference
count assert out of the water. The assert has never caught a bug,
and we have tracing to track changes if there ever is a problem,
so just remove it.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
      bd32d25a
    • D
      xfs: reduce the number of CIL lock round trips during commit · d1583a38
      由 Dave Chinner 提交于 
      When commiting a transaction, we do a lock CIL state lock round trip
on every single log vector we insert into the CIL. This is resulting
in the lock being as hot as the inode and dcache locks on 8-way
create workloads. Rework the insertion loops to bring the number
of lock round trips to one per transaction for log vectors, and one
more do the busy extents.

Also change the allocation of the log vector buffer not to zero it
as we copy over the entire allocated buffer anyway.

This patch also includes a structural cleanup to the CIL item
insertion provided by Christoph Hellwig.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
      d1583a38
    • P
      xfs: eliminate some newly-reported gcc warnings · 9c169915
      由 Poyo VL 提交于 
      Ionut Gabriel Popescu <poyo_vl@yahoo.com> submitted a simple change
to eliminate some "may be used uninitialized" warnings when building
XFS.  The reported condition seems to be something that GCC did not
used to recognize or report.  The warnings were produced by:

    gcc version 4.5.0 20100604
    [gcc-4_5-branch revision 160292] (SUSE Linux)
Signed-off-by: NIonut Gabriel Popescu <poyo_vl@yahoo.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>
      9c169915
    • C
      xfs: remove the ->kill_root btree operation · c0e59e1a
      由 Christoph Hellwig 提交于 
      The implementation os ->kill_root only differ by either simply
zeroing out the now unused buffer in the btree cursor in the inode
allocation btree or using xfs_btree_setbuf in the allocation btree.

Initially both of them used xfs_btree_setbuf, but the use in the
ialloc btree was removed early on because it interacted badly with
xfs_trans_binval.

In addition to zeroing out the buffer in the cursor xfs_btree_setbuf
updates the bc_ra array in the btree cursor, and calls
xfs_trans_brelse on the buffer previous occupying the slot.

The bc_ra update should be done for the alloc btree updated too,
although the lack of it does not cause serious problems.  The
xfs_trans_brelse call on the other hand is effectively a no-op in
the end - it keeps decrementing the bli_recur refcount until it hits
zero, and then just skips out because the buffer will always be
dirty at this point.  So removing it for the allocation btree is
just fine.

So unify the code and move it to xfs_btree.c.  While we're at it
also replace the call to xfs_btree_setbuf with a NULL bp argument in
xfs_btree_del_cursor with a direct call to xfs_trans_brelse given
that the cursor is beeing freed just after this and the state
updates are superflous.  After this xfs_btree_setbuf is only used
with a non-NULL bp argument and can thus be simplified.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>
      c0e59e1a
    • C
      xfs: stop using xfs_qm_dqtobp in xfs_qm_dqflush · acecf1b5
      由 Christoph Hellwig 提交于 
      In xfs_qm_dqflush we know that q_blkno must be initialized already from a
previous xfs_qm_dqread.  So instead of calling xfs_qm_dqtobp we can
simply read the quota buffer directly.  This also saves us from a duplicate
xfs_qm_dqcheck call check and allows xfs_qm_dqtobp to be simplified now
that it is always called for a newly initialized inode.  In addition to
that properly unwind all locks in xfs_qm_dqflush when xfs_qm_dqcheck
fails.

This mirrors a similar cleanup in the inode lookup done earlier.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>
      acecf1b5
    • C
      xfs: simplify xfs_qm_dqusage_adjust · 52fda114
      由 Christoph Hellwig 提交于 
      There is no need to have the users and group/project quota locked at the
same time.  Get rid of xfs_qm_dqget_noattach and just do a xfs_qm_dqget
inside xfs_qm_quotacheck_dqadjust for the quota we are operating on
right now.  The new version of xfs_qm_quotacheck_dqadjust holds the
inode lock over it's operations, which is not a problem as it simply
increments counters and there is no concern about log contention
during mount time.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>
      52fda114
    • D
      xfs: Introduce XFS_IOC_ZERO_RANGE · 44722352
      由 Dave Chinner 提交于 
      XFS_IOC_ZERO_RANGE is the equivalent of an atomic XFS_IOC_UNRESVSP/
XFS_IOC_RESVSP call pair. It enabled ranges of written data to be
turned into zeroes without requiring IO or having to free and
reallocate the extents in the range given as would occur if we had
to punch and then preallocate them separately.  This enables
applications to zero parts of files very quickly without changing
the layout of the files in any way.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
      44722352
    • D
      xfs: use range primitives for xfs page cache operations · 3ae4c9de
      由 Dave Chinner 提交于 
      While XFS passes ranges to operate on from the core code, the
functions being called ignore the either the entire range or the end
of the range. This is historical because when the function were
written linux didn't have the necessary range operations. Update the
functions to use the correct operations.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
      3ae4c9de
  3. 15 10月, 2010 4 次提交
    • L
      Linux 2.6.36-rc8 · cd07202c
      由 Linus Torvalds 提交于
      cd07202c
    • L
      Un-inline the core-dump helper functions · 3aa0ce82
      由 Linus Torvalds 提交于 
      Tony Luck reports that the addition of the access_ok() check in commit
0eead9ab ("Don't dump task struct in a.out core-dumps") broke the
ia64 compile due to missing the necessary header file includes.

Rather than add yet another include (<asm/unistd.h>) to make everything
happy, just uninline the silly core dump helper functions and move the
bodies to fs/exec.c where they make a lot more sense.

dump_seek() in particular was too big to be an inline function anyway,
and none of them are in any way performance-critical.  And we really
don't need to mess up our include file headers more than they already
are.
Reported-and-tested-by: NTony Luck <tony.luck@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3aa0ce82
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · ae42d8d4
      由 Linus Torvalds 提交于 
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ehea: Fix a checksum issue on the receive path
  net: allow FEC driver to use fixed PHY support
  tg3: restore rx_dropped accounting
  b44: fix carrier detection on bind
  net: clear heap allocations for privileged ethtool actions
  NET: wimax, fix use after free
  ATM: iphase, remove sleep-inside-atomic
  ATM: mpc, fix use after free
  ATM: solos-pci, remove use after free
  net/fec: carrier off initially to avoid root mount failure
  r8169: use device model DMA API
  r8169: allocate with GFP_KERNEL flag when able to sleep
      ae42d8d4
    • L
      Don't dump task struct in a.out core-dumps · 0eead9ab
      由 Linus Torvalds 提交于 
      akiphie points out that a.out core-dumps have that odd task struct
dumping that was never used and was never really a good idea (it goes
back into the mists of history, probably the original core-dumping
code).  Just remove it.

Also do the access_ok() check on dump_write().  It probably doesn't
matter (since normal filesystems all seem to do it anyway), but he
points out that it's normally done by the VFS layer, so ...

[ I suspect that we should possibly do "vfs_write()" instead of
  calling ->write directly.  That also does the whole fsnotify and write
  statistics thing, which may or may not be a good idea. ]

And just to be anal, do this all for the x86-64 32-bit a.out emulation
code too, even though it's not enabled (and won't currently even
compile)
Reported-by: Nakiphie <akiphie@lavabit.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0eead9ab
  5. 14 10月, 2010 11 次提交
  7. 13 10月, 2010 5 次提交
    • R
      ARM: relax ioremap prohibition (309caa9c) for -final and -stable · 06c10884
      由 Russell King 提交于 
      ... but produce a big warning about the problem as encouragement
for people to fix their drivers.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      06c10884
    • R
      Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 · 841f48a8
      由 Russell King 提交于
      841f48a8
    • M
      ARM: 6440/1: ep93xx: DMA: fix channel_disable · 10d48b39
      由 Mika Westerberg 提交于 
      When channel_disable() is called, it disables per channel interrupts and
waits until channels state becomes STATE_STALL, and then disables the
channel. Now, if the DMA transfer is disabled while the channel is in
STATE_NEXT we will not wait anything and disable the channel immediately.
This seems to cause weird data corruption for example in audio transfers.

Fix is to wait while we are in STATE_NEXT or STATE_ON and only then
disable the channel.
Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      10d48b39
    • L
      Merge branch 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 0acc1b2a
      由 Linus Torvalds 提交于 
      * 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Move TSC reset out of vmcb_init
  KVM: x86: Fix SVM VMCB reset
      0acc1b2a
    • S
      ring-buffer: Fix typo of time extends per page · d0134324
      由 Steven Rostedt 提交于 
      Time stamps for the ring buffer are created by the difference between
two events. Each page of the ring buffer holds a full 64 bit timestamp.
Each event has a 27 bit delta stamp from the last event. The unit of time
is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events
happen more than 134 milliseconds apart, a time extend is inserted
to add more bits for the delta. The time extend has 59 bits, which
is good for ~18 years.

Currently the time extend is committed separately from the event.
If an event is discarded before it is committed, due to filtering,
the time extend still exists. If all events are being filtered, then
after ~134 milliseconds a new time extend will be added to the buffer.

This can only happen till the end of the page. Since each page holds
a full timestamp, there is no reason to add a time extend to the
beginning of a page. Time extends can only fill a page that has actual
data at the beginning, so there is no fear that time extends will fill
more than a page without any data.

When reading an event, a loop is made to skip over time extends
since they are only used to maintain the time stamp and are never
given to the caller. As a paranoid check to prevent the loop running
forever, with the knowledge that time extends may only fill a page,
a check is made that tests the iteration of the loop, and if the
iteration is more than the number of time extends that can fit in a page
a warning is printed and the ring buffer is disabled (all of ftrace
is also disabled with it).

There is another event type that is called a TIMESTAMP which can
hold 64 bits of data in the theoretical case that two events happen
18 years apart. This code has not been implemented, but the name
of this event exists, as well as the structure for it. The
size of a TIMESTAMP is 16 bytes, where as a time extend is only
8 bytes. The macro used to calculate how many time extends can fit on
a page used the TIMESTAMP size instead of the time extend size
cutting the amount in half.

The following test case can easily trigger the warning since we only
need to have half the page filled with time extends to trigger the
warning:

 # cd /sys/kernel/debug/tracing/
 # echo function > current_tracer
 # echo 'common_pid < 0' > events/ftrace/function/filter
 # echo > trace
 # echo 1 > trace_marker
 # sleep 120
 # cat trace

Enabling the function tracer and then setting the filter to only trace
functions where the process id is negative (no events), then clearing
the trace buffer to ensure that we have nothing in the buffer,
then write to trace_marker to add an event to the beginning of a page,
sleep for 2 minutes (only 35 seconds is probably needed, but this
guarantees the bug), and then finally reading the trace which will
trigger the bug.

This patch fixes the typo and prevents the false positive of that warning.
Reported-by: NHans J. Koch <hjk@linutronix.de>
Tested-by: NHans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      d0134324
  9. 12 10月, 2010 8 次提交