- 07 9月, 2010 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 06 9月, 2010 2 次提交
-
-
由 Jiri Slaby 提交于
There is adangling code in wm8753_probe which is never executed. Remove it. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jarkko Nikula 提交于
Null pointer dereference will occur from *setup = pdata->setup if pdata is not set. Fix this by moving assignments from pdata inside non-null case. Thanks to Jiri Slaby <jirislaby@gmail.com> for noticing. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 03 9月, 2010 1 次提交
-
-
由 Kuninori Morimoto 提交于
This patch revive ak4642_snd_controls which was removed on f0fba2adSigned-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 02 9月, 2010 2 次提交
-
-
由 Julia Lawall 提交于
Add a call to of_node_put in the error handling code following a call to of_parse_phandle. This patch also moves the existing call to of_node_put tothe end of the error handling code, to make it possible to jump to of_node_put without doing the other cleanup operations. These appear to be disjoint operations, so the ordering doesn't matter. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1,E2; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node |of_find_node_by_type |of_find_node_with_property |of_find_matching_node |of_parse_phandle )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> ( E2 = x; | of_node_put(x); ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NTimur Tabi <timur@freescale.com> Acked-by: NLiam Girdwood <lrg@slimlogic.uo.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Arnaud Patard (Rtp) 提交于
Allow snd-soc-kirkwood autoloading by adding an alias. Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 9月, 2010 3 次提交
-
-
由 Ian Lartey 提交于
Signed-off-by: NIan Lartey <ian@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Allow selection of the channel used for input to the AIFnDAC signals. This isn't integrated into DAPM since we treat the data as a single mono channel until just beyond this selection so it ends up having no visible effect on the routing. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 31 8月, 2010 5 次提交
-
-
由 Arnaud Patard (Rtp) 提交于
multicomponent support added/changed some device name but added some typos, breaking existing OpenRD Client support. Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
This patch modify dai link - platform_name: sh_fsi/sh_fsi2 are used for FSI driver - codec_name: ak4642/ak4643 are used for ak4642 driver This is quick hack. I should modify it more wisely in future Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Vasily Khoruzhick 提交于
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Vasily Khoruzhick 提交于
Disable some codec modules in standby mode, completely disable codec in off mode to save some power. Fix suspend/resume: mark mixer regs as dirty on resume to restore mixer values, otherwise driver produces no sound (master is muted by default). Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Acked-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Manuel Lauss 提交于
This patch fixes up the au1x audio platform after the multi-component merge: - compile fixes and updates to get DB1200 platform audio working again, - removal of global variables in AC97/I2S/DMA(PCM) modules. The AC97 part is limited to one instance only for now due to issues with getting at driver data in the soc_ac97_ops. Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 8月, 2010 7 次提交
-
-
由 Jarkko Nikula 提交于
Currently output controls are not uniform. Some routes are adjusted by mono controls that don't match to associated mixer switch, many routes are not covered at all and stereo controls have following variants: - L-to-L & R-to-R - R-to-L & R-to-R - L-to-L & R-to-L This patch attempts to fix these issues. First, for the convenience, only direct L-to-L, R-to-R and [L | R]-to-Mono routes are controlled by the stereo controls. This logic is also used with the output pin mute controls so all of them except mono output are controlled by stereo switches. Then rest of the swapped L-to-R and R-to-L routes are controlled by the mono controls that map to mixer switches with a same name. Mixers can then associate these switches and volumes together. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Jarkko Nikula 提交于
It turned out that the output mixers and their routes were misdefined: They are not mixing output pins to internal signals but opposite. This has worked for direct left-to-left and right-to-right routes since for those there are complete routes. For swapped left-to-right and right-to-left routes this is not working since there are no routes defined between them. Another consequence is that those misdefined mixers are incorrectly routed to several output pins leading unnecessary pin powerings even if there is no route active to them. Fix these by reimplementing the output mixers and routes as they are in hardware. For completeness add also a few missing links between internal signals and outputs. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Jarkko Nikula 提交于
Each output pin has 7 consecutive control registers in tlv320aic3x register map. First 6 of them control the signal mixing and one is for output level and power control. Sort these registers as they are sorted clearly in hardware, it makes also definitions more readable and easier to pinpoint missing register definitions. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Jarkko Nikula 提交于
Bit 3 in output pin_CTRL register mutes the whole output pin not just the route from DAC so remove misleading DAC from control name. Currently only "Line[L | R] Playback Switch" were correct. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Lartey 提交于
Signed-off-by: NIan Lartey <ian@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
I think this is a typo, debugfs_pop_time should not be executable. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLiam Girdwood <lrg@slimloogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 8月, 2010 1 次提交
-
-
由 Axel Lin 提交于
The "priv" allocated in pxa_ssp_probe() should be kfreed in pxa_ssp_remove(). Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 8月, 2010 8 次提交
-
-
由 Ian Lartey 提交于
Signed-off-by: NIan Lartey <ian@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Lartey 提交于
Signed-off-by: NIan Lartey <ian@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Lartey 提交于
Signed-off-by: NIan Lartey <ian@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sascha Hauer 提交于
In synchronous mode the SSI_SRCCR values are ignored. Instead SSI_STCCR must be used for both receiving and transmitting. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The Makefile and Kconfig updates for WL1273 appear to have been mising from the patch posted, add them. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
This makes it that little bit easier to spot the diagnostics in the logs. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Jarkko Nikula 提交于
Speaker amplifier is controlled by TWL4030 GPIO which may sleep. Therefore use gpio_set_value_cansleep to get rid of runtime warning that is introduced after the commit 9c4ba946 and to get a stack trace if ever executing this code in atomic context. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Jarkko Nikula 提交于
aic3x_init does a soft reset first and thus TLV320AIC3x GPIO setup must be done after doing the basic init. Before multi-component the init was done at i2c probe time and GPIO setup at soc probe time. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 21 8月, 2010 1 次提交
-
-
由 Timur Tabi 提交于
'struct of_device' no longer exists, and its functionality has been merged into platform_device. Update the MPC8610 HPCD audio drivers (fsl_ssi, fsl_dma, and mpc8610_hpcd) accordingly. Also add a #include for slab.h, which is now needed for kmalloc and kfree. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 8月, 2010 7 次提交
-
-
由 Mark Brown 提交于
Otherwise we generate worrying (but benign) warnings for amps. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Matti J. Aaltonen 提交于
This is an ALSA codec for the Texas Instruments WL1273 FM Radio. Signed-off-by: NMatti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Timur Tabi 提交于
The Freescale P1022 is a dual-core e500-based SOC with multimedia capabilities, specifically the same SSI audio controller on the MPC8610. The P1022 DS reference board includes a P1022 and a Wolfson Microelectronics WM8776 codec. Signed-off-by: NTimur Tabi <timur@freescale.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Fix reference to moved header file, which was unused anyway. This change fixes below build error: CC sound/soc/pxa/pxa2xx-ac97.o sound/soc/pxa/pxa2xx-ac97.c:27:24: error: pxa2xx-pcm.h: No such file or directory make[3]: *** [sound/soc/pxa/pxa2xx-ac97.o] Error 1 make[2]: *** [sound/soc/pxa] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Randolph Chung 提交于
This patch adds support for the tlv320aic3007 codec to the tlv320aic3x driver. The tlv320aic3007 is similar to the aic31, but has an additional class-D speaker amp. The speaker amp control register overlaps with the mono output register of other codecs in this family, so we add logic to identify the actual codec being registered to set things up accordingly. Signed-off-by: NRandolph Chung <tausq@parisc-linux.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Timur Tabi 提交于
Some codecs have separate DAIs for playback and capture, so the DMA driver should allocate a DMA buffer only for the streams that are valid when the driver is opened. Signed-off-by: NTimur Tabi <timur@freescale.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
In e740_init(), we call gpio_request() for GPIO_E740_MIC_ON, GPIO_E740_AMP_ON and GPIO_E740_WM9705_nAVDD2. We should free the these gpio accordingly in e740_exit(). Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 8月, 2010 2 次提交
-
-
由 Janusz Krzysztofik 提交于
In the process of unification of codec DAI names while implementing multi-component, the CX20442 codec DAI has been renamed to "cx20442-hifi". This new name seems not adequate for a 8kHz voice codec. Use a better name, "cx20442-voice", as suggested by Liam Girdwood. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Randolph Chung 提交于
The tlv320aic3x codec driver only supports symmetric rates for capture/ playback. Set the flag in the DAI accordingly. Signed-off-by: NRandolph Chung <tausq@parisc-linux.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-